Using physical interface eno1 + case "$1" in + shift + start + echo '========== qemu-bridge-init: entering start - beg' ========== qemu-bridge-init: entering start - beg + hostname boxtops.pl.sophia.inria.fr + uname -a Linux boxtops.pl.sophia.inria.fr 4.2.6-301.fc23.x86_64 #1 SMP Fri Nov 20 22:22:41 UTC 2015 x86_64 x86_64 x86_64 GNU/Linux + ip address show 1: lo: mtu 65536 qdisc noqueue state UNKNOWN group default link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 inet 127.0.0.1/8 scope host lo valid_lft forever preferred_lft forever inet6 ::1/128 scope host valid_lft forever preferred_lft forever 2: eno1: mtu 1500 qdisc mq state UP group default qlen 1000 link/ether b0:83:fe:d4:36:92 brd ff:ff:ff:ff:ff:ff inet 138.96.112.39/21 brd 138.96.119.255 scope global dynamic eno1 valid_lft 579sec preferred_lft 579sec inet6 fe80::b283:feff:fed4:3692/64 scope link valid_lft forever preferred_lft forever 3: eno2: mtu 1500 qdisc noop state DOWN group default qlen 1000 link/ether b0:83:fe:d4:36:93 brd ff:ff:ff:ff:ff:ff 4: eno3: mtu 1500 qdisc noop state DOWN group default qlen 1000 link/ether b0:83:fe:d4:36:94 brd ff:ff:ff:ff:ff:ff 5: eno4: mtu 1500 qdisc noop state DOWN group default qlen 1000 link/ether b0:83:fe:d4:36:95 brd ff:ff:ff:ff:ff:ff + ip route show default via 138.96.112.250 dev eno1 138.96.112.0/21 dev eno1 proto kernel scope link src 138.96.112.39 169.254.0.0/16 dev eno1 scope link metric 1002 + echo '========== qemu-bridge-init: entering start - end' ========== qemu-bridge-init: entering start - end + sysctl net.bridge.bridge-nf-call-iptables=0 sysctl: cannot stat /proc/sys/net/bridge/bridge-nf-call-iptables: No such file or directory + sysctl net.bridge.bridge-nf-call-ip6tables=0 sysctl: cannot stat /proc/sys/net/bridge/bridge-nf-call-ip6tables: No such file or directory + sysctl net.bridge.bridge-nf-call-arptables=0 sysctl: cannot stat /proc/sys/net/bridge/bridge-nf-call-arptables: No such file or directory + '[' -n '' ']' + type -p brctl + ip address show br0 + ip address show eno1 ++ /sbin/ip address show eno1 ++ grep -v inet6 ++ grep inet ++ head --lines=1 ++ awk '{print $2;}' + address=138.96.112.39/21 + '[' -z 138.96.112.39/21 ']' ++ /sbin/ip address show eno1 ++ grep -v inet6 ++ grep inet ++ head --lines=1 ++ awk '{print $4;}' + broadcast=138.96.119.255 + '[' -z 138.96.119.255 ']' ++ ip route show ++ grep default ++ awk '{print $3;}' + gateway=138.96.112.250 + '[' -z 138.96.112.250 ']' + modprobe tun + echo 'tun loaded' tun loaded + echo 'Granting read/write acces to the tun device' Granting read/write acces to the tun device + chmod 666 /dev/net/tun + echo 'Creating bridge INTERFACE_BRIDGE=br0' Creating bridge INTERFACE_BRIDGE=br0 + brctl addbr br0 + brctl addif br0 eno1 + echo 'Activating promiscuous mode INTERFACE_LAN=eno1' Activating promiscuous mode INTERFACE_LAN=eno1 + ip link set dev eno1 promisc on + sleep 2 + echo 'Setting bridge address=138.96.112.39/21 broadcast=138.96.119.255' Setting bridge address=138.96.112.39/21 broadcast=138.96.119.255 + ip address add 138.96.112.39/21 broadcast 138.96.119.255 dev br0 + ip link set dev br0 up + ip address del 138.96.112.39/21 dev eno1 + sleep 1 + echo 'Adding default route via gateway=138.96.112.250 on dev eno1' Adding default route via gateway=138.96.112.250 on dev eno1 + ip route add 0.0.0.0/0 via 138.96.112.250 dev br0 + echo '========== qemu-bridge-init: exiting start - beg' ========== qemu-bridge-init: exiting start - beg + ip address show 1: lo: mtu 65536 qdisc noqueue state UNKNOWN group default link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 inet 127.0.0.1/8 scope host lo valid_lft forever preferred_lft forever inet6 ::1/128 scope host valid_lft forever preferred_lft forever 2: eno1: mtu 1500 qdisc mq master br0 state UP group default qlen 1000 link/ether b0:83:fe:d4:36:92 brd ff:ff:ff:ff:ff:ff inet6 fe80::b283:feff:fed4:3692/64 scope link valid_lft forever preferred_lft forever 3: eno2: mtu 1500 qdisc noop state DOWN group default qlen 1000 link/ether b0:83:fe:d4:36:93 brd ff:ff:ff:ff:ff:ff 4: eno3: mtu 1500 qdisc noop state DOWN group default qlen 1000 link/ether b0:83:fe:d4:36:94 brd ff:ff:ff:ff:ff:ff 5: eno4: mtu 1500 qdisc noop state DOWN group default qlen 1000 link/ether b0:83:fe:d4:36:95 brd ff:ff:ff:ff:ff:ff 6: br0: mtu 1500 qdisc noqueue state UP group default link/ether b0:83:fe:d4:36:92 brd ff:ff:ff:ff:ff:ff inet 138.96.112.39/21 brd 138.96.119.255 scope global br0 valid_lft forever preferred_lft forever inet6 fe80::b283:feff:fed4:3692/64 scope link valid_lft forever preferred_lft forever + ip route show default via 138.96.112.250 dev br0 138.96.112.0/21 dev br0 proto kernel scope link src 138.96.112.39 + echo '========== qemu-bridge-init: exiting start - end' ========== qemu-bridge-init: exiting start - end + exit 0 Running qemu-start-node in /vservers/2016.01.18--f14-n3/qemu-vnode02.pl.sophia.inria.fr Starting at Mon Jan 18 12:09:11 CET 2016 Creating hard disk image (100G) as hdd-qcow2-100G.img .. Done Trying to load the kqemu module WARNING : Could not modprobe kqemu Checking for a loaded kqemu module Checking for /dev/kqemu ls: cannot access /dev/kqemu: No such file or directory Cleaning up pid file Running qemu-kvm -m 2048 -hda hdd-qcow2-100G.img -nographic -pidfile qemu.pid -boot d -cdrom vnode02.pl.sophia.inria.fr.iso -net nic,macaddr=02:34:56:00:00:02 -net tap,script=qemu-ifup + INTERFACE_BRIDGE=br0 ++ discover_interface +++ gather_interfaces +++ python ++ for ifname in '$(gather_interfaces)' ++ ip link show eno3 ++ grep -qi 'state UP' ++ for ifname in '$(gather_interfaces)' ++ ip link show eno4 ++ grep -qi 'state UP' ++ for ifname in '$(gather_interfaces)' ++ ip link show eno1 ++ grep -qi 'state UP' ++ echo eno1 ++ return + INTERFACE_LAN=eno1 + echo Using physical interface eno1 Using physical interface eno1 + main add tap0 + case "$1" in + shift + add tap0 + [[ -z tap0 ]] + INTERFACE_LAN=tap0 + shift + echo '========== qemu-bridge-init: entering add - beg' ========== qemu-bridge-init: entering add - beg + ip address show 1: lo: mtu 65536 qdisc noqueue state UNKNOWN group default link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 inet 127.0.0.1/8 scope host lo valid_lft forever preferred_lft forever inet6 ::1/128 scope host valid_lft forever preferred_lft forever 2: eno1: mtu 1500 qdisc mq master br0 state UP group default qlen 1000 link/ether b0:83:fe:d4:36:92 brd ff:ff:ff:ff:ff:ff inet6 fe80::b283:feff:fed4:3692/64 scope link valid_lft forever preferred_lft forever 3: eno2: mtu 1500 qdisc noop state DOWN group default qlen 1000 link/ether b0:83:fe:d4:36:93 brd ff:ff:ff:ff:ff:ff 4: eno3: mtu 1500 qdisc noop state DOWN group default qlen 1000 link/ether b0:83:fe:d4:36:94 brd ff:ff:ff:ff:ff:ff 5: eno4: mtu 1500 qdisc noop state DOWN group default qlen 1000 link/ether b0:83:fe:d4:36:95 brd ff:ff:ff:ff:ff:ff 6: br0: mtu 1500 qdisc noqueue state UP group default link/ether b0:83:fe:d4:36:92 brd ff:ff:ff:ff:ff:ff inet 138.96.112.39/21 brd 138.96.119.255 scope global br0 valid_lft forever preferred_lft forever inet6 fe80::b283:feff:fed4:3692/64 scope link valid_lft forever preferred_lft forever 7: tap0: mtu 1500 qdisc noop state DOWN group default qlen 500 link/ether 72:a0:ee:6f:87:3c brd ff:ff:ff:ff:ff:ff + ip route show default via 138.96.112.250 dev br0 138.96.112.0/21 dev br0 proto kernel scope link src 138.96.112.39 + echo '========== qemu-bridge-init: entering add - end' ========== qemu-bridge-init: entering add - end + echo 'Activating link for tap0...' Activating link for tap0... + /sbin/ip link set tap0 up + sleep 1 + echo 'Adding tap0 to br0' Adding tap0 to br0 + brctl addif br0 tap0 + CONFIG=qemu.conf + '[' -f qemu.conf ']' + . qemu.conf ++ MACADDR=02:34:56:00:00:02 ++ NODE_ISO=vnode02.pl.sophia.inria.fr.iso ++ HOSTNAME=vnode02.pl.sophia.inria.fr ++ IP=138.96.112.102 ++ TARGET_ARCH=x86_64 + echo 'Tweaking iptables' Tweaking iptables + iptables-save + ./iptables.py iptables.pre iptables.post 138.96.112.102 + iptables-restore + echo '========== qemu-bridge-init: exiting add - beg' ========== qemu-bridge-init: exiting add - beg + ip address show 1: lo: mtu 65536 qdisc noqueue state UNKNOWN group default link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 inet 127.0.0.1/8 scope host lo valid_lft forever preferred_lft forever inet6 ::1/128 scope host valid_lft forever preferred_lft forever 2: eno1: mtu 1500 qdisc mq master br0 state UP group default qlen 1000 link/ether b0:83:fe:d4:36:92 brd ff:ff:ff:ff:ff:ff inet6 fe80::b283:feff:fed4:3692/64 scope link valid_lft forever preferred_lft forever 3: eno2: mtu 1500 qdisc noop state DOWN group default qlen 1000 link/ether b0:83:fe:d4:36:93 brd ff:ff:ff:ff:ff:ff 4: eno3: mtu 1500 qdisc noop state DOWN group default qlen 1000 link/ether b0:83:fe:d4:36:94 brd ff:ff:ff:ff:ff:ff 5: eno4: mtu 1500 qdisc noop state DOWN group default qlen 1000 link/ether b0:83:fe:d4:36:95 brd ff:ff:ff:ff:ff:ff 6: br0: mtu 1500 qdisc noqueue state UP group default link/ether 72:a0:ee:6f:87:3c brd ff:ff:ff:ff:ff:ff inet 138.96.112.39/21 brd 138.96.119.255 scope global br0 valid_lft forever preferred_lft forever inet6 fe80::b283:feff:fed4:3692/64 scope link valid_lft forever preferred_lft forever 7: tap0: mtu 1500 qdisc fq_codel master br0 state UNKNOWN group default qlen 500 link/ether 72:a0:ee:6f:87:3c brd ff:ff:ff:ff:ff:ff inet6 fe80::70a0:eeff:fe6f:873c/64 scope link tentative valid_lft forever preferred_lft forever + ip route show default via 138.96.112.250 dev br0 138.96.112.0/21 dev br0 proto kernel scope link src 138.96.112.39 + echo 'Installed iptables' Installed iptables + iptables-save # Generated by iptables-save v1.4.21 on Mon Jan 18 12:09:13 2016 *filter :INPUT ACCEPT [0:0] :FORWARD ACCEPT [0:0] :OUTPUT ACCEPT [0:0] -A INPUT -m state --state RELATED,ESTABLISHED -j ACCEPT -A INPUT -p icmp -j ACCEPT -A INPUT -i lo -j ACCEPT -A INPUT -s 138.96.112.102/32 -j ACCEPT -A INPUT -d 138.96.112.102/32 -j ACCEPT -A INPUT -p tcp -m state --state NEW -m tcp --dport 22 -j ACCEPT -A INPUT -j REJECT --reject-with icmp-host-prohibited -A FORWARD -j REJECT --reject-with icmp-host-prohibited COMMIT # Completed on Mon Jan 18 12:09:13 2016 + echo '========== qemu-bridge-init: exiting add - end' ========== qemu-bridge-init: exiting add - end + exit 0 ISOLINUX 4.02 2010-07-21 Copyright (C) 1994-2010 H. Peter Anvin et al Loading kernel...... Loading bootcd.img.................................................................................................. Loading overlay.img...ready. Initializing cgroup subsys cpuset Initializing cgroup subsys cpu Linux version 2.6.32-36.onelab.x86_64 (support@planet-lab.org) (gcc version 4.5.1 20100924 (Red Hat 4.5.1-4) (GCC) ) #1 SMP Mon Jan 18 10:49:25 CET 2016 Command line: ramdisk_size=300105 initrd=bootcd.img,overlay.img root=/dev/ram0 rw hcheck_reboot0 systemd.log_level=debug console=ttyS0,115200n8 biosdevname=0 selinux=0 BOOT_IMAGE=kernel KERNEL supported cpus: Intel GenuineIntel AMD AuthenticAMD Centaur CentaurHauls BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000007ffe0000 (usable) BIOS-e820: 000000007ffe0000 - 0000000080000000 (reserved) BIOS-e820: 00000000feffc000 - 00000000ff000000 (reserved) BIOS-e820: 00000000fffc0000 - 0000000100000000 (reserved) DMI 2.8 present. SMBIOS version 2.8 @ 0xF6330 last_pfn = 0x7ffe0 max_arch_pfn = 0x400000000 PAT not supported by CPU. init_memory_mapping: 0000000000000000-000000007ffe0000 RAMDISK: 7a053000 - 7ffbef0d ACPI: RSDP 00000000000f6300 00014 (v00 BOCHS ) ACPI: RSDT 000000007ffe16ee 00034 (v01 BOCHS BXPCRSDT 00000001 BXPC 00000001) ACPI: FACP 000000007ffe0c14 00074 (v01 BOCHS BXPCFACP 00000001 BXPC 00000001) ACPI: DSDT 000000007ffe0040 00BD4 (v01 BOCHS BXPCDSDT 00000001 BXPC 00000001) ACPI: FACS 000000007ffe0000 00040 ACPI: SSDT 000000007ffe0c88 009B6 (v01 BOCHS BXPCSSDT 00000001 BXPC 00000001) ACPI: APIC 000000007ffe163e 00078 (v01 BOCHS BXPCAPIC 00000001 BXPC 00000001) ACPI: HPET 000000007ffe16b6 00038 (v01 BOCHS BXPCHPET 00000001 BXPC 00000001) No NUMA configuration found Faking a node at 0000000000000000-000000007ffe0000 Bootmem setup node 0 0000000000000000-000000007ffe0000 NODE_DATA [000000000000a000 - 000000000003dfff] bootmap [000000000003e000 - 000000000004dfff] pages 10 (7 early reservations) ==> bootmem [0000000000 - 007ffe0000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000] #2 [0001000000 - 0001f4fdc4] TEXT DATA BSS ==> [0001000000 - 0001f4fdc4] #3 [007a053000 - 007ffbef0d] RAMDISK ==> [007a053000 - 007ffbef0d] #4 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000] #5 [0001f50000 - 0001f50095] BRK ==> [0001f50000 - 0001f50095] #6 [0000008000 - 000000a000] PGTABLE ==> [0000008000 - 000000a000] found SMP MP-table at [ffff8800000f64e0] f64e0 kvm-clock: Using msrs 4b564d01 and 4b564d00 kvm-clock: cpu 0, msr 0:1bc10c1, boot clock Zone PFN ranges: DMA 0x00000001 -> 0x00001000 DMA32 0x00001000 -> 0x00100000 Normal 0x00100000 -> 0x00100000 Movable zone start PFN for each node early_node_map[2] active PFN ranges 0: 0x00000001 -> 0x0000009f 0: 0x00000100 -> 0x0007ffe0 ACPI: PM-Timer IO Port: 0x608 ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1]) ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 0, version 17, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level) ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level) Using ACPI (MADT) for SMP configuration information ACPI: HPET id: 0x8086a201 base: 0xfed00000 SMP: Allowing 1 CPUs, 0 hotplug CPUs PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000 PM: Registered nosave memory: 00000000000f0000 - 0000000000100000 Allocating PCI resources starting at 80000000 (gap: 80000000:7effc000) Booting paravirtualized kernel on KVM NR_CPUS:4096 nr_cpumask_bits:1 nr_cpu_ids:1 nr_node_ids:1 PERCPU: Embedded 30 pages/cpu @ffff880002000000 s93016 r8192 d21672 u2097152 pcpu-alloc: s93016 r8192 d21672 u2097152 alloc=1*2097152 pcpu-alloc: [0] 0 kvm-clock: cpu 0, msr 0:20160c1, primary cpu clock Built 1 zonelists in Node order, mobility grouping on. Total pages: 516889 Policy zone: DMA32 Kernel command line: ramdisk_size=300105 initrd=bootcd.img,overlay.img root=/dev/ram0 rw hcheck_reboot0 systemd.log_level=debug console=ttyS0,115200n8 biosdevname=0 selinux=0 BOOT_IMAGE=kernel PID hash table entries: 4096 (order: 3, 32768 bytes) Checking aperture... No AGP bridge found AMD-Vi disabled by default: pass amd_iommu=on to enable Memory: 1953940k/2097024k available (5343k kernel code, 392k absent, 142692k reserved, 6597k data, 1232k init) Hierarchical RCU implementation. NR_IRQS:33024 nr_irqs:256 Console: colour VGA+ 80x25 console [ttyS0] enabled allocated 20971520 bytes of page_cgroup please try 'cgroup_disable=memory' option if you don't want memory cgroups HPET: 3 timers in total, 0 timers will be used for per-cpu timer Detected 2599.996 MHz processor. Calibrating delay loop (skipped) preset value.. 5199.99 BogoMIPS (lpj=2599996) pid_max: default: 32768 minimum: 301 Security Framework initialized SELinux: Disabled at boot. Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes) Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes) Mount-cache hash table entries: 256 Initializing cgroup subsys ns Initializing cgroup subsys cpuacct Initializing cgroup subsys memory Initializing cgroup subsys devices Initializing cgroup subsys freezer Initializing cgroup subsys net_cls Initializing cgroup subsys blkio mce: CPU supports 10 MCE banks alternatives: switching to unfair spinlock SMP alternatives: switching to UP code Freeing SMP alternatives: 38k freed ACPI: Core revision 20090903 ftrace: converting mcount calls to 0f 1f 44 00 00 ftrace: allocating 21994 entries in 87 pages Enabling x2apic Enabled x2apic Setting APIC routing to physical x2apic ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 CPU0: Intel QEMU Virtual CPU version 2.4.1 stepping 03 Performance Events: Broken PMU hardware detected, using software events only. NMI watchdog disabled (cpu0): hardware events not enabled Brought up 1 CPUs Total of 1 processors activated (5199.99 BogoMIPS). devtmpfs: initialized regulator: core version 0.5 NET: Registered protocol family 16 ACPI: bus type pci registered PCI: Using configuration type 1 for base access bio: create slab at 0 ACPI: Interpreter enabled ACPI: (supports S0 S3 S4 S5) ACPI: Using IOAPIC for interrupt routing ACPI: No dock devices found. ACPI: PCI Root Bridge [PCI0] (0000:00) pci 0000:00:01.3: quirk: region 0600-063f claimed by PIIX4 ACPI pci 0000:00:01.3: quirk: region 0700-070f claimed by PIIX4 SMB ACPI: PCI Interrupt Link [LNKA] (IRQs 5 *10 11) ACPI: PCI Interrupt Link [LNKB] (IRQs 5 *10 11) ACPI: PCI Interrupt Link [LNKC] (IRQs 5 10 *11) ACPI: PCI Interrupt Link [LNKD] (IRQs 5 10 *11) ACPI: PCI Interrupt Link [LNKS] (IRQs *9) HEST: Table is not found! vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none vgaarb: loaded SCSI subsystem initialized usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb PCI: Using ACPI for IRQ routing NetLabel: Initializing NetLabel: domain hash size = 128 NetLabel: protocols = UNLABELED CIPSOv4 NetLabel: unlabeled traffic allowed by default hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 hpet0: 3 comparators, 64-bit 100.000000 MHz counter Switching to clocksource kvm-clock pnp: PnP ACPI init ACPI: bus type pnp registered pnp: PnP ACPI: found 11 devices ACPI: ACPI bus type pnp unregistered NET: Registered protocol family 2 IP route cache hash table entries: 65536 (order: 7, 524288 bytes) TCP established hash table entries: 262144 (order: 10, 4194304 bytes) TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) TCP: Hash tables configured (established 262144 bind 65536) TCP reno registered NET: Registered protocol family 1 pci 0000:00:00.0: Limiting direct PCI/PCI transfers pci 0000:00:01.0: PIIX3: Enabling Passive Release pci 0000:00:01.0: Activating ISA DMA hang workarounds Trying to unpack rootfs image as initramfs... Freeing initrd memory: 97711k freed audit: initializing netlink socket (disabled) type=2000 audit(1453115362.610:1): initialized HugeTLB registered 2 MB page size, pre-allocated 0 pages VFS: Disk quotas dquot_6.5.2 Dquot-cache hash table entries: 512 (order 0, 4096 bytes) msgmni has been set to 4007 alg: No test for stdrng (krng) ksign: Installing public key data Loading keyring - Added public key D1C3198AB517476D - User ID: Red Hat, Inc. (Kernel Module GPG key) - Added public key D4A26C9CCD09BEDA - User ID: Red Hat Enterprise Linux Driver Update Program Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) pci_hotplug: PCI Hot Plug PCI Core version: 0.5 pciehp: PCI Express Hot Plug Controller Driver version: 0.4 acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 acpiphp: Slot [3] registered acpiphp: Slot [4] registered acpiphp: Slot [5] registered acpiphp: Slot [6] registered acpiphp: Slot [7] registered acpiphp: Slot [8] registered acpiphp: Slot [9] registered acpiphp: Slot [10] registered acpiphp: Slot [11] registered acpiphp: Slot [12] registered acpiphp: Slot [13] registered acpiphp: Slot [14] registered acpiphp: Slot [15] registered acpiphp: Slot [16] registered acpiphp: Slot [17] registered acpiphp: Slot [18] registered acpiphp: Slot [19] registered acpiphp: Slot [20] registered acpiphp: Slot [21] registered acpiphp: Slot [22] registered acpiphp: Slot [23] registered acpiphp: Slot [24] registered acpiphp: Slot [25] registered acpiphp: Slot [26] registered acpiphp: Slot [27] registered acpiphp: Slot [28] registered acpiphp: Slot [29] registered acpiphp: Slot [30] registered acpiphp: Slot [31] registered pci-stub: invalid id string "" input: Power Button as /class/input/input0 ACPI: Power Button [PWRF] processor LNXCPU:00: registered as cooling_device0 ERST: Table is not found! Non-volatile memory driver v1.3 Linux agpgart interface v0.103 crash memory driver: version 1.1 Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled ˙serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A 00:06: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A brd: module loaded loop: module loaded input: Macintosh mouse button emulation as /class/input/input1 Fixed MDIO Bus: probed ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver uhci_hcd: USB Universal Host Controller Interface driver PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12 serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice input: AT Translated Set 2 keyboard as /class/input/input2 rtc_cmos 00:01: RTC can wake from S4 rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0 rtc0: alarms up to one day, 114 bytes nvram, hpet irqs cpuidle: using governor ladder cpuidle: using governor menu usbcore: registered new interface driver hiddev usbcore: registered new interface driver usbhid usbhid: v2.6:USB HID core driver TCP cubic registered Initializing XFRM netlink socket NET: Registered protocol family 10 lo: Disabled Privacy Extensions NET: Registered protocol family 17 registered taskstats version 1 rtc_cmos 00:01: setting system clock to 2016-01-18 11:09:22 UTC (1453115362) Initalizing network drop monitor service Freeing unused kernel memory: 1232k freed Write protecting the kernel read-only data: 10240k Freeing unused kernel memory: 784k freed Freeing unused kernel memory: 1736k freed PlanetLab BootCD - distro onelab based on f14 11:09:22 pl_sysinit: bringing system online 11:09:22 pl_sysinit: mounting file systems none on /dev/pts type devpts (rw,gid=5,mode=620) mount: proc already mounted mount: none already mounted or /sys busy 11:09:22 pl_sysinit: starting udevd Starting udev: scsi0 : ata_piix e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k6-1-NAPI e1000: Copyright (c) 1999-2006 Intel Corporation. scsi1 : ata_piix ata1: PATA max MWDMA2 cmd 0x1f0 ctl 0x3f6 bmdma 0xc040 irq 14 ata2: PATA max MWDMA2 cmd 0x170 ctl 0x376 bmdma 0xc048 irq 15 piix4_smbus 0000:00:01.3: SMBus Host Controller at 0x700, revision 0 ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11 e1000 0000:00:03.0: PCI INT A -> Link[LNKC] -> GSI 11 (level, high) -> IRQ 11 ata2.00: ATAPI: QEMU DVD-ROM, 2.4.1, max UDMA/100 ata1.00: ATA-7: QEMU HARDDISK, 2.4.1, max UDMA/100 ata1.00: 209715200 sectors, multi 16: LBA48 ata2.00: configured for MWDMA2 ata1.00: configured for MWDMA2 scsi 0:0:0:0: Direct-Access ATA QEMU HARDDISK 2.4. PQ: 0 ANSI: 5 scsi 1:0:0:0: CD-ROM QEMU QEMU DVD-ROM 2.4. PQ: 0 ANSI: 5 parport_pc 00:05: reported by Plug and Play ACPI parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE] e1000 0000:00:03.0: eth0: (PCI:33MHz:32-bit) 02:34:56:00:00:02 e1000 0000:00:03.0: eth0: Intel(R) PRO/1000 Network Connection sd 0:0:0:0: [sda] 209715200 512-byte logical blocks: (107 GB/100 GiB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda:sr0: scsi3-mmc drive: 4x/4x cd/rw xa/form2 tray Uniform CD-ROM driver Revision: 3.20 unknown partition table sd 0:0:0:0: [sda] Attached SCSI disk sd 0:0:0:0: Attached scsi generic sg0 type 0 sr 1:0:0:0: Attached scsi generic sg1 type 5 ppdev: user-space parallel port driver [ OK ] 11:09:23 pl_sysinit: invoking hardware initialization script input: ImExPS/2 Generic Explorer Mouse as /class/input/input3 11:09:23(UTC) pl_hwinit: loading applicable modules 11:09:23(UTC) pl_hwinit: found and loading module ata_piix (00:01.1) WARNING: Deprecated config file /etc/modprobe.conf, all config files belong into /etc/modprobe.d/. 11:09:23(UTC) pl_hwinit: found and loading module pata_acpi (00:01.1) WARNING: Deprecated config file /etc/modprobe.conf, all config files belong into /etc/modprobe.d/. 11:09:23(UTC) pl_hwinit: found and loading module i2c-piix4 (00:01.3) WARNING: Deprecated config file /etc/modprobe.conf, all config files belong into /etc/modprobe.d/. 11:09:23(UTC) pl_hwinit: found and loading module e1000 (00:03.0) WARNING: Deprecated config file /etc/modprobe.conf, all config files belong into /etc/modprobe.d/. 11:09:23(UTC) pl_hwinit: loading sd_mod WARNING: Deprecated config file /etc/modprobe.conf, all config files belong into /etc/modprobe.d/. 11:09:23(UTC) pl_hwinit: loading usb_storage WARNING: Deprecated config file /etc/modprobe.conf, all config files belong into /etc/modprobe.d/. Initializing USB Mass Storage driver... usbcore: registered new interface driver usb-storage USB Mass Storage support registered. 11:09:23(UTC) pl_hwinit: loading floppy device driver WARNING: Deprecated config file /etc/modprobe.conf, all config files belong into /etc/modprobe.d/. floppy0: allowed_drive_mask=0 Floppy drive(s): fd0 is 1.44M FDC 0 is a S82078B 11:09:23(UTC) pl_hwinit: waiting for usb system to initialize. 11:09:33 pl_sysinit: finding cd to mount on /usr 11:09:33 pl_sysinit: creating device mapper control node 11:09:33 pl_sysinit: unable to create device mapper control node, continuing 11:09:33 pl_sysinit: configuring kernel parameters net.ipv4.ip_forward = 0 net.ipv4.conf.default.rp_filter = 1 kernel.sysrq = 0 kernel.core_uses_pid = 1 net.ipv4.tcp_moderate_rcvbuf = 0 net.ipv4.tcp_window_scaling = 0 Starting system logger: [ OK ] 11:09:33 pl_sysinit: bringing network online + OLD_NODE_CONF_NAME=planet.cnf + NEW_NODE_CONF_NAME=plnode.txt + CD_NET_CONF_BOOT=/usr/boot/plnode.txt + CD_NET_CONF_ROOT=/usr/plnode.txt + FALLBACK_NET_CONF=/usr/boot/default-node.txt + TMP_OLD_FLOPPY_CONF_FILE=/tmp/oldfloppy_planet.cnf + USED_NET_CONF=/tmp/planet.cnf + DEFAULT_NET_DEV=eth0 + DHCLIENT_CONF_FILE=/tmp/dhclient.conf + NODE_CONF_DEVICE_FS_TYPES=msdos,ext2 + CONF_DEVICE_MOUNT_POINT=/mnt/confdevice + /bin/mkdir -p /mnt/confdevice + IFCONFIG_OUTPUT=/tmp/ifconfig + DEFAULT_NET_CONF=0 ++ date +%H:%M:%S + echo 11:09:33 ' pl_netinit: bringing loopback network device up' 11:09:33 pl_netinit: bringing loopback network device up + /sbin/ifconfig lo 127.0.0.1 up + find_node_config + /bin/rm -f /tmp/oldfloppy_planet.cnf ++ date +%H:%M:%S + echo 11:09:33 ' pl_netinit: looking for node configuration file on floppy' 11:09:33 pl_netinit: looking for node configuration file on floppy + /bin/mount -o ro -t msdos,ext2 /dev/fd0 /mnt/confdevice end_request: I/O error, dev fd0, sector 0 end_request: I/O error, dev fd0, sector 0 mount: /dev/fd0 is not a valid block device + [[ 32 -eq 0 ]] ++ date +%H:%M:%S + echo 11:09:33 ' pl_netinit: no floppy could be mounted, continuing search.' 11:09:33 pl_netinit: no floppy could be mounted, continuing search. ++ date +%H:%M:%S + echo 11:09:33 ' pl_netinit: looking for node configuration file on flash based devices' 11:09:33 pl_netinit: looking for node configuration file on flash based devices + shopt -s nullglob + for device in '/sys/block/[hsv]d*' ++ cat /sys/block/sda/removable + removable=0 + [[ 0 -ne 1 ]] + continue + shopt -u nullglob + '[' -r /tmp/oldfloppy_planet.cnf ']' ++ date +%H:%M:%S + echo 11:09:33 ' pl_netinit: looking for network configuration on cd in /usr/boot' 11:09:33 pl_netinit: looking for network configuration on cd in /usr/boot + '[' -r /usr/boot/plnode.txt ']' ++ date +%H:%M:%S + echo 11:09:33 ' pl_netinit: found cd configuration file ' 11:09:33 pl_netinit: found cd configuration file + /etc/init.d/pl_validateconf + return 1 + '[' 1 -eq 0 ']' ++ date +%H:%M:%S + echo 11:09:33 ' pl_netinit: loading network configuration' 11:09:33 pl_netinit: loading network configuration + . /tmp/planet.cnf ++ NODE_ID=1 ++ NET_DEVICE=02:34:56:00:00:02 ++ IP_METHOD=static ++ IP_ADDRESS=138.96.112.102 ++ IP_GATEWAY=138.96.112.250 ++ IP_NETMASK=255.255.248.0 ++ IP_NETADDR=138.96.112.0 ++ IP_BROADCASTADDR=138.96.119.255 ++ IP_DNS1=138.96.112.1 ++ IP_DNS2=138.96.112.2 ++ HOST_NAME=vnode02 ++ DOMAIN_NAME=pl.sophia.inria.fr + [[ 0 -eq 1 ]] + [[ -n '' ]] + ETH_DEVICE= + [[ -n 02:34:56:00:00:02 ]] ++ tr A-Z a-z + NET_DEVICE=02:34:56:00:00:02 + pushd /sys/class/net /sys/class/net / + for device in '*' ++ tr A-Z a-z ++ cat eth0/address + dev_address=02:34:56:00:00:02 + '[' eth0 == 02:34:56:00:00:02 -o 02:34:56:00:00:02 == 02:34:56:00:00:02 ']' + ETH_DEVICE=eth0 ++ date +%H:%M:%S + echo 11:09:33 ' pl_netinit: found device eth0 with mac address 02:34:56:00:00:02' 11:09:33 pl_netinit: found device eth0 with mac address 02:34:56:00:00:02 + break + popd / + [[ -z eth0 ]] + [[ -z eth0 ]] + ALLOW=60 + COUNTER=0 + true + /sbin/ifconfig eth0 ++ date +%H:%M:%S + echo 11:09:33 ' pl_netinit: device present eth0, proceeding (0s/60s)' 11:09:33 pl_netinit: device present eth0, proceeding (0s/60s) + break + /sbin/ifconfig eth0 up e1000: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX ++ date +%H:%M:%S + echo 11:09:33 ' pl_netinit: attempting to start networking' 11:09:33 pl_netinit: attempting to start networking + /sbin/service network start Bringing up loopback interface: [ OK ] Bringing up interface eth0: grep: /etc/resolv.conf: No such file or directory cat: /etc/resolv.conf: No such file or directory cp: cannot stat `/etc/resolv.conf': No such file or directory [ OK ] + /sbin/ifconfig eth0 ++ date +%H:%M:%S + echo 11:09:35 ' pl_netinit: network online' 11:09:35 pl_netinit: network online + pl_netinit_patch_resolv_conf + file=/etc/resolv.conf + needed= + '[' -f /etc/resolv.conf ']' + cmp /etc/resolv.conf /dev/null cmp: EOF on /dev/null + '[' -n '' ']' + echo pl_netinit has no need to patch /etc/resolv.conf pl_netinit has no need to patch /etc/resolv.conf + pl_netinit_forensics + echo '-------------------- BEG post pl_netinit forensics' -------------------- BEG post pl_netinit forensics + file=/root/.ssh/authorized_keys + echo /root/.ssh/authorized_keys /root/.ssh/authorized_keys + '[' -f /root/.ssh/authorized_keys ']' + echo '!!!!!!!!!! missing /root/.ssh/authorized_keys' !!!!!!!!!! missing /root/.ssh/authorized_keys + file=/etc/ssh/sshd_config + '[' -f /etc/ssh/sshd_config ']' + echo '---------- egrep Pass|Auth|PAM|Root' /etc/ssh/sshd_config ---------- egrep Pass|Auth|PAM|Root /etc/ssh/sshd_config + egrep 'Pass|Auth|PAM|Root' + grep -v '^#' /etc/ssh/sshd_config PasswordAuthentication yes ChallengeResponseAuthentication no GSSAPIAuthentication yes UsePAM yes + file=/etc/resolv.conf + '[' -f /etc/resolv.conf ']' + echo '---------- /etc/resolv.conf' ---------- /etc/resolv.conf + cat /etc/resolv.conf nameserver 138.96.112.1 nameserver 138.96.112.2 search pl.sophia.inria.fr + echo '-------------------- END post pl_netinit forensics' -------------------- END post pl_netinit forensics 11:09:35 ======================================== BEG SANITY CHECKS 11:09:35 ========== running cat /etc/resolv.conf nameserver 138.96.112.1 nameserver 138.96.112.2 search pl.sophia.inria.fr 11:09:35 ========== cat /etc/resolv.conf returned with retcod=0 11:09:35 ========== running cat /etc/sysconfig/network-scripts/ifcfg-eth0 # Autogenerated by pyplnet... do not edit! DEVICE=eth0 USERCTL="no" DNS2="138.96.112.2" DNS1="138.96.112.1" IPADDR="138.96.112.102" PRIMARY="yes" NETMASK="255.255.248.0" BOOTPROTO="static" HWADDR="02:34:56:00:00:02" ONBOOT="yes" 11:09:35 ========== cat /etc/sysconfig/network-scripts/ifcfg-eth0 returned with retcod=0 11:09:35 ==================== Loaded modules 11:09:35 ========== running lsmod Module Size Used by ext2 71464 0 mbcache 7982 1 ext2 msdos 7904 0 fat 55171 1 msdos floppy 60968 0 usb_storage 49373 0 sg 30372 0 sr_mod 16193 0 cdrom 39471 1 sr_mod sd_mod 38851 0 crc_t10dif 1507 1 sd_mod ata_generic 3643 0 ppdev 8791 0 pata_acpi 3667 0 parport_pc 22983 0 i2c_piix4 12510 0 parport 37171 2 ppdev,parport_pc e1000 167412 0 i2c_core 31327 1 i2c_piix4 ata_piix 22795 0 11:09:35 ========== lsmod returned with retcod=0 11:09:35 ==================== Configured interfaces 11:09:35 ========== running ifconfig eth0 Link encap:Ethernet HWaddr 02:34:56:00:00:02 inet addr:138.96.112.102 Bcast:138.96.119.255 Mask:255.255.248.0 inet6 addr: fe80::34:56ff:fe00:2/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:204 errors:0 dropped:0 overruns:0 frame:0 TX packets:8 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:14891 (14.5 KiB) TX bytes:493 (493.0 b) lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:0 (0.0 b) TX bytes:0 (0.0 b) 11:09:35 ========== ifconfig returned with retcod=0 11:09:35 ==================== cat /proc/net/dev 11:09:35 ========== running cat /proc/net/dev Inter-| Receive | Transmit face |bytes packets errs drop fifo frame compressed multicast|bytes packets errs drop fifo colls carrier compressed lo: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 eth0: 14891 204 0 0 0 0 0 0 493 8 0 0 0 0 0 0 11:09:35 ========== cat /proc/net/dev returned with retcod=0 11:09:35 ==================== Routing table 11:09:35 ========== running netstat -rn Kernel IP routing table Destination Gateway Genmask Flags MSS Window irtt Iface 138.96.112.0 0.0.0.0 255.255.248.0 U 0 0 0 eth0 169.254.0.0 0.0.0.0 255.255.0.0 U 0 0 0 eth0 0.0.0.0 138.96.112.250 0.0.0.0 UG 0 0 0 eth0 11:09:35 ========== netstat -rn returned with retcod=0 11:09:35 ==================== Pinging boot server ( vplc02.pl.sophia.inria.fr ) from file /usr/boot/boot_server 11:09:35 ========== running ping -c 4 -w 4 vplc02.pl.sophia.inria.fr PING vplc02.pl.sophia.inria.fr (138.96.112.72) 56(84) bytes of data. 64 bytes from vplc02.pl.sophia.inria.fr (138.96.112.72): icmp_req=1 ttl=64 time=0.781 ms 64 bytes from vplc02.pl.sophia.inria.fr (138.96.112.72): icmp_req=2 ttl=64 time=0.283 ms 64 bytes from vplc02.pl.sophia.inria.fr (138.96.112.72): icmp_req=3 ttl=64 time=0.298 ms 64 bytes from vplc02.pl.sophia.inria.fr (138.96.112.72): icmp_req=4 ttl=64 time=0.293 ms --- vplc02.pl.sophia.inria.fr ping statistics --- 4 packets transmitted, 4 received, 0% packet loss, time 3005ms rtt min/avg/max/mdev = 0.283/0.413/0.781/0.213 ms 11:09:38 ========== ping -c 4 -w 4 vplc02.pl.sophia.inria.fr returned with retcod=0 11:09:38 ==================== Pinging google public DNS 11:09:38 ========== running ping -c 1 -w 5 8.8.8.8 PING 8.8.8.8 (8.8.8.8) 56(84) bytes of data. 64 bytes from 8.8.8.8: icmp_req=1 ttl=57 time=4.47 ms --- 8.8.8.8 ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 0ms rtt min/avg/max/mdev = 4.477/4.477/4.477/0.000 ms 11:09:38 ========== ping -c 1 -w 5 8.8.8.8 returned with retcod=0 11:09:38 ==================== Resolving hostname at 138.96.112.1 11:09:38 ========== running host -W 4 pool.ntp.org 138.96.112.1 Using domain server: Name: 138.96.112.1 Address: 138.96.112.1#53 Aliases: pool.ntp.org has address 91.121.34.166 pool.ntp.org has address 91.121.90.6 pool.ntp.org has address 95.81.173.8 pool.ntp.org has address 178.33.227.201 11:09:39 ========== host -W 4 pool.ntp.org 138.96.112.1 returned with retcod=0 11:09:39 ==================== Resolving hostname at 138.96.112.2 11:09:39 ========== running host -W 4 pool.ntp.org 138.96.112.2 Using domain server: Name: 138.96.112.2 Address: 138.96.112.2#53 Aliases: pool.ntp.org has address 80.74.64.2 pool.ntp.org has address 95.81.173.155 pool.ntp.org has address 129.250.35.250 pool.ntp.org has address 188.165.39.130 11:09:39 ========== host -W 4 pool.ntp.org 138.96.112.2 returned with retcod=0 11:09:39 ======================================== END SANITY CHECKS 11:09:39 pl_sysinit: attempting to sync clock 18 Jan 11:09:48 ntpdate[582]: no server suitable for synchronization found 11:09:49 pl_boot: generating new nonce 11:09:49 pl_boot: fetching script from boot server vplc02.pl.sophia.inria.fr 11:09:49 pl_boot: verifying downloaded script 11:09:49 pl_boot: decrypted and verified script succesfully 11:09:49 pl_boot: handing control to download script Current BREAKPOINT_MODE is Off 11:09:50(UTC) BootManager started at: Mon, 18 Jan 2016 11:09:50 +0000 11:09:50(UTC) Running version 5.3 of BootManager. 11:09:50(UTC) Step: Initializing the BootManager. 11:09:50(UTC) Opening connection to API server Default xmlrpclib strategy failed Traceback (most recent call last): File "/tmp/source/steps/InitializeBootManager.py", line 69, in Run ssl_context = ssl.SSLContext(ssl.PROTOCOL_TLSv1) AttributeError: 'module' object has no attribute 'SSLContext' 11:09:50(UTC) Running on boot cd version: (5, 3) 11:09:50(UTC) Loading support for LVM 11:09:50(UTC) sysexec >>> modprobe dm_mod sysexec >>> modprobe dm_mod device-mapper: uevent: version 1.0.3 device-mapper: ioctl: 4.20.6-ioctl (2011-02-02) initialised: dm-devel@redhat.com 11:09:50(UTC) ==========stderr WARNING: Deprecated config file /etc/modprobe.conf, all config files belong into /etc/modprobe.d/. 11:09:50(UTC) Step: Reading node configuration file. 11:09:50(UTC) Checking standard floppy disk for plnode.txt file. 11:09:50(UTC) Mounting /dev/fd0 on /tmp/conffilemount 11:09:50(UTC) sysexec >>> mount -o ro -t ext2,msdos /dev/fd0 /tmp/conffilemount sysexec >>> mount -o ro -t ext2,msdos /dev/fd0 /tmp/conffilemount end_request: I/O error, dev fd0, sector 0 end_request: I/O error, dev fd0, sector 0 11:09:50(UTC) ==========stderr mount: /dev/fd0 is not a valid block device 11:09:50(UTC) sysexec >>> umount /tmp/conffilemount sysexec >>> umount /tmp/conffilemount 11:09:50(UTC) ==========stderr umount: /tmp/conffilemount: not mounted 11:09:50(UTC) Checking flash devices for plnode.txt file. 11:09:50(UTC) Skipping non-scsi device ram0 11:09:50(UTC) Skipping non-scsi device ram1 11:09:50(UTC) Skipping non-scsi device ram2 11:09:50(UTC) Skipping non-scsi device ram3 11:09:50(UTC) Skipping non-scsi device ram4 11:09:50(UTC) Skipping non-scsi device ram5 11:09:50(UTC) Skipping non-scsi device ram6 11:09:50(UTC) Skipping non-scsi device ram7 11:09:50(UTC) Skipping non-scsi device ram8 11:09:50(UTC) Skipping non-scsi device ram9 11:09:50(UTC) Skipping non-scsi device ram10 11:09:50(UTC) Skipping non-scsi device ram11 11:09:50(UTC) Skipping non-scsi device ram12 11:09:50(UTC) Skipping non-scsi device ram13 11:09:50(UTC) Skipping non-scsi device ram14 11:09:50(UTC) Skipping non-scsi device ram15 11:09:50(UTC) Skipping non-scsi device loop0 11:09:50(UTC) Skipping non-scsi device loop1 11:09:50(UTC) Skipping non-scsi device loop2 11:09:50(UTC) Skipping non-scsi device loop3 11:09:50(UTC) Skipping non-scsi device loop4 11:09:50(UTC) Skipping non-scsi device loop5 11:09:50(UTC) Skipping non-scsi device loop6 11:09:50(UTC) Skipping non-scsi device loop7 11:09:50(UTC) Skipping non-removable device sda 11:09:50(UTC) Skipping non-scsi device sr0 11:09:50(UTC) Skipping non-scsi device fd0 11:09:50(UTC) Checking standard floppy disk for planet.cnf file (for legacy nodes). 11:09:50(UTC) Checking / (ramdisk) for plnode.txt file. 11:09:50(UTC) Checking for existence of /plnode.txt 11:09:50(UTC) Checking /usr/boot (cd) for plnode.txt file. 11:09:50(UTC) Checking for existence of /usr/boot/plnode.txt 11:09:50(UTC) Read in contents of file /usr/boot/plnode.txt 11:09:50(UTC) Successfully read and parsed node configuration file. 11:09:50(UTC) Checking that hostname vnode02.pl.sophia.inria.fr resolves 11:09:50(UTC) Hostname vnode02.pl.sophia.inria.fr correctly resolves to 138.96.112.102: 11:09:50(UTC) Using NODE_ID 1 11:09:50(UTC) ReadNodeConfiguration: [5] using plnode.txt from CD in /usr/boot 11:09:50(UTC) Step: Authenticating node with PLC. 11:09:50(UTC) Authentication successful. 11:09:50(UTC) Step: Updating node last boot times at PLC. 11:09:50(UTC) Successfully updated boot state for this node at PLC 11:09:50(UTC) Step: Starting RunlevelAgent.py 11:09:50(UTC) Step: Retrieving details of node from PLC. 11:09:50(UTC) Successfully retrieved node record. 11:09:50(UTC) Current boot state: reinstall 11:09:50(UTC) Node make/model: qemu/minhw 11:09:50(UTC) node model indicates override to hardware requirements. 11:09:50(UTC) Primary network as returned from PLC: {'last_updated': None, 'network': '138.96.112.0', 'ip': '138.96.112.102', 'dns1': '138.96.112.1', 'hostname': None, 'netmask': '255.255.248.0', 'interface_tag_ids': [], 'interface_id': 1, 'broadcast': '138.96.119.255', 'method': 'static', 'mac': '02:34:56:00:00:02', 'node_id': 1, 'gateway': '138.96.112.250', 'dns2': '138.96.112.2', 'is_primary': True, 'type': 'ipv4', 'bwlimit': None} 11:09:50(UTC) NodeFlavour as returned from PLC: {'fcdistro': 'f14', 'nodefamily': 'onelab-f14-x86_64', 'virt': 'vs', 'extensions': [], 'pldistro': 'onelab', 'plain': False, 'arch': 'x86_64'} 11:09:50(UTC) Step: Starting fallback sshd. 11:09:50(UTC) Creating SSH1 RSA host key /etc/ssh/ssh_host_key 11:09:50(UTC) sysexec >>> ssh-keygen -q -t rsa1 -f /etc/ssh/ssh_host_key -C '' -N '' sysexec >>> ssh-keygen -q -t rsa1 -f /etc/ssh/ssh_host_key -C '' -N '' 11:09:50(UTC) sysexec >>> chmod 600 /etc/ssh/ssh_host_key sysexec >>> chmod 600 /etc/ssh/ssh_host_key 11:09:50(UTC) sysexec >>> chmod 644 /etc/ssh/ssh_host_key.pub sysexec >>> chmod 644 /etc/ssh/ssh_host_key.pub 11:09:50(UTC) Creating SSH2 RSA host key /etc/ssh/ssh_host_rsa_key 11:09:50(UTC) sysexec >>> ssh-keygen -q -t rsa -f /etc/ssh/ssh_host_rsa_key -C '' -N '' sysexec >>> ssh-keygen -q -t rsa -f /etc/ssh/ssh_host_rsa_key -C '' -N '' 11:09:51(UTC) sysexec >>> chmod 600 /etc/ssh/ssh_host_rsa_key sysexec >>> chmod 600 /etc/ssh/ssh_host_rsa_key 11:09:51(UTC) sysexec >>> chmod 644 /etc/ssh/ssh_host_rsa_key.pub sysexec >>> chmod 644 /etc/ssh/ssh_host_rsa_key.pub 11:09:51(UTC) Creating SSH2 DSA host key /etc/ssh/ssh_host_dsa_key 11:09:51(UTC) sysexec >>> ssh-keygen -q -t dsa -f /etc/ssh/ssh_host_dsa_key -C '' -N '' sysexec >>> ssh-keygen -q -t dsa -f /etc/ssh/ssh_host_dsa_key -C '' -N '' 11:09:51(UTC) sysexec >>> chmod 600 /etc/ssh/ssh_host_dsa_key sysexec >>> chmod 600 /etc/ssh/ssh_host_dsa_key 11:09:51(UTC) sysexec >>> chmod 644 /etc/ssh/ssh_host_dsa_key.pub sysexec >>> chmod 644 /etc/ssh/ssh_host_dsa_key.pub 11:09:51(UTC) sysexec >>> cp -f /tmp/source/debug_files//sshd_config /etc/ssh//sshd_config sysexec >>> cp -f /tmp/source/debug_files//sshd_config /etc/ssh//sshd_config 11:09:51(UTC) Installing debug ssh key for root user 11:09:51(UTC) sysexec >>> cp -f /tmp/source/debug_files//debug_root_ssh_key /root/.ssh/authorized_keys sysexec >>> cp -f /tmp/source/debug_files//debug_root_ssh_key /root/.ssh/authorized_keys 11:09:51(UTC) sysexec >>> chmod 700 /root/.ssh sysexec >>> chmod 700 /root/.ssh 11:09:51(UTC) sysexec >>> chmod 600 /root/.ssh/authorized_keys sysexec >>> chmod 600 /root/.ssh/authorized_keys 11:09:51(UTC) Starting sshd 11:09:51(UTC) sysexec >>> service sshd start sysexec >>> service sshd start 11:09:51(UTC) ==========stdout Starting sshd: [ OK ] 11:09:51(UTC) sysexec >>> touch /tmp/SSHD_RUNNING sysexec >>> touch /tmp/SSHD_RUNNING 11:09:51(UTC) Step: Checking if hardware requirements met. 11:09:51(UTC) Checking for available memory. 11:09:51(UTC) Looks like we have enough memory: 2055444 kb end_request: I/O error, dev fd0, sector 0 end_request: I/O error, dev fd0, sector 0 end_request: I/O error, dev fd0, sector 0 end_request: I/O error, dev fd0, sector 0 end_request: I/O error, dev fd0, sector 0 end_request: I/O error, dev fd0, sector 0 end_request: I/O error, dev fd0, sector 0 end_request: I/O error, dev fd0, sector 0 end_request: I/O error, dev fd0, sector 0 end_request: I/O error, dev fd0, sector 0 end_request: I/O error, dev fd0, sector 0 end_request: I/O error, dev fd0, sector 0 end_request: I/O error, dev fd0, sector 0 end_request: I/O error, dev fd0, sector 0 end_request: I/O error, dev fd0, sector 0 end_request: I/O error, dev fd0, sector 0 end_request: I/O error, dev fd0, sector 0 end_request: I/O error, dev fd0, sector 0 end_request: I/O error, dev fd0, sector 0 end_request: I/O error, dev fd0, sector 0 end_request: I/O error, dev fd0, sector 0 end_request: I/O error, dev fd0, sector 0 end_request: I/O error, dev fd0, sector 0 end_request: I/O error, dev fd0, sector 0 end_request: I/O error, dev fd0, sector 0 end_request: I/O error, dev fd0, sector 0 end_request: I/O error, dev fd0, sector 0 end_request: I/O error, dev fd0, sector 0 end_request: I/O error, dev fd0, sector 0 end_request: I/O error, dev fd0, sector 0 end_request: I/O error, dev fd0, sector 0 end_request: I/O error, dev fd0, sector 0 end_request: I/O error, dev fd0, sector 0 end_request: I/O error, dev fd0, sector 0 end_request: I/O error, dev fd0, sector 0 end_request: I/O error, dev fd0, sector 0 end_request: I/O error, dev fd0, sector 0 end_request: I/O error, dev fd0, sector 0 end_request: I/O error, dev fd0, sector 0 end_request: I/O error, dev fd0, sector 0 end_request: I/O error, dev fd0, sector 0 end_request: I/O error, dev fd0, sector 0 end_request: I/O error, dev fd0, sector 0 end_request: I/O error, dev fd0, sector 0 end_request: I/O error, dev fd0, sector 0 end_request: I/O error, dev fd0, sector 0 end_request: I/O error, dev fd0, sector 0 end_request: I/O error, dev fd0, sector 0 end_request: I/O error, dev fd0, sector 0 end_request: I/O error, dev fd0, sector 0 end_request: I/O error, dev fd0, sector 0 end_request: I/O error, dev fd0, sector 0 end_request: I/O error, dev fd0, sector 0 end_request: I/O error, dev fd0, sector 0 end_request: I/O error, dev fd0, sector 0 end_request: I/O error, dev fd0, sector 0 end_request: I/O error, dev fd0, sector 0 end_request: I/O error, dev fd0, sector 0 end_request: I/O error, dev fd0, sector 0 end_request: I/O error, dev fd0, sector 0 end_request: I/O error, dev fd0, sector 0 end_request: I/O error, dev fd0, sector 0 end_request: I/O error, dev fd0, sector 0 end_request: I/O error, dev fd0, sector 0 end_request: I/O error, dev fd0, sector 0 end_request: I/O error, dev fd0, sector 0 end_request: I/O error, dev fd0, sector 0 end_request: I/O error, dev fd0, sector 0 end_request: I/O error, dev fd0, sector 0 end_request: I/O error, dev fd0, sector 0 end_request: I/O error, dev fd0, sector 0 end_request: I/O error, dev fd0, sector 0 end_request: I/O error, dev fd0, sector 0 end_request: I/O error, dev fd0, sector 0 end_request: I/O error, dev fd0, sector 0 end_request: I/O error, dev fd0, sector 0 end_request: I/O error, dev fd0, sector 0 end_request: I/O error, dev fd0, sector 0 end_request: I/O error, dev fd0, sector 0 end_request: I/O error, dev fd0, sector 0 end_request: I/O error, dev fd0, sector 0 end_request: I/O error, dev fd0, sector 0 end_request: I/O error, dev fd0, sector 0 end_request: I/O error, dev fd0, sector 0 end_request: I/O error, dev fd0, sector 0 end_request: I/O error, dev fd0, sector 0 end_request: I/O error, dev fd0, sector 0 end_request: I/O error, dev fd0, sector 0 end_request: I/O error, dev fd0, sector 0 end_request: I/O error, dev fd0, sector 0 end_request: I/O error, dev fd0, sector 0 end_request: I/O error, dev fd0, sector 0 end_request: I/O error, dev fd0, sector 0 end_request: I/O error, dev fd0, sector 0 end_request: I/O error, dev fd0, sector 0 end_request: I/O error, dev fd0, sector 0 end_request: I/O error, dev fd0, sector 0 end_request: I/O error, dev fd0, sector 0 end_request: I/O error, dev fd0, sector 0 end_request: I/O error, dev fd0, sector 0 end_request: I/O error, dev fd0, sector 0 end_request: I/O error, dev fd0, sector 0 end_request: I/O error, dev fd0, sector 0 end_request: I/O error, dev fd0, sector 0 end_request: I/O error, dev fd0, sector 0 end_request: I/O error, dev fd0, sector 0 end_request: I/O error, dev fd0, sector 0 end_request: I/O error, dev fd0, sector 0 end_request: I/O error, dev fd0, sector 0 end_request: I/O error, dev fd0, sector 0 end_request: I/O error, dev fd0, sector 0 end_request: I/O error, dev fd0, sector 0 end_request: I/O error, dev fd0, sector 0 end_request: I/O error, dev fd0, sector 0 end_request: I/O error, dev fd0, sector 0 end_request: I/O error, dev fd0, sector 0 end_request: I/O error, dev fd0, sector 0 end_request: I/O error, dev fd0, sector 0 end_request: I/O error, dev fd0, sector 0 end_request: I/O error, dev fd0, sector 0 end_request: I/O error, dev fd0, sector 0 end_request: I/O error, dev fd0, sector 0 end_request: I/O error, dev fd0, sector 0 end_request: I/O error, dev fd0, sector 0 end_request: I/O error, dev fd0, sector 0 end_request: I/O error, dev fd0, sector 0 end_request: I/O error, dev fd0, sector 0 end_request: I/O error, dev fd0, sector 0 end_request: I/O error, dev fd0, sector 0 end_request: I/O error, dev fd0, sector 0 end_request: I/O error, dev fd0, sector 0 end_request: I/O error, dev fd0, sector 0 end_request: I/O error, dev fd0, sector 0 end_request: I/O error, dev fd0, sector 0 end_request: I/O error, dev fd0, sector 0 end_request: I/O error, dev fd0, sector 0 end_request: I/O error, dev fd0, sector 0 end_request: I/O error, dev fd0, sector 0 end_request: I/O error, dev fd0, sector 0 end_request: I/O error, dev fd0, sector 0 end_request: I/O error, dev fd0, sector 0 end_request: I/O error, dev fd0, sector 0 end_request: I/O error, dev fd0, sector 0 end_request: I/O error, dev fd0, sector 0 end_request: I/O error, dev fd0, sector 0 end_request: I/O error, dev fd0, sector 0 end_request: I/O error, dev fd0, sector 0 end_request: I/O error, dev fd0, sector 0 end_request: I/O error, dev fd0, sector 0 end_request: I/O error, dev fd0, sector 0 end_request: I/O error, dev fd0, sector 0 end_request: I/O error, dev fd0, sector 0 end_request: I/O error, dev fd0, sector 0 end_request: I/O error, dev fd0, sector 0 end_request: I/O error, dev fd0, sector 0 end_request: I/O error, dev fd0, sector 0 end_request: I/O error, dev fd0, sector 0 end_request: I/O error, dev fd0, sector 0 end_request: I/O error, dev fd0, sector 0 end_request: I/O error, dev fd0, sector 0 end_request: I/O error, dev fd0, sector 0 end_request: I/O error, dev fd0, sector 0 end_request: I/O error, dev fd0, sector 0 end_request: I/O error, dev fd0, sector 0 end_request: I/O error, dev fd0, sector 0 end_request: I/O error, dev fd0, sector 0 end_request: I/O error, dev fd0, sector 0 end_request: I/O error, dev fd0, sector 0 end_request: I/O error, dev fd0, sector 0 end_request: I/O error, dev fd0, sector 0 end_request: I/O error, dev fd0, sector 0 end_request: I/O error, dev fd0, sector 0 end_request: I/O error, dev fd0, sector 0 end_request: I/O error, dev fd0, sector 0 end_request: I/O error, dev fd0, sector 0 end_request: I/O error, dev fd0, sector 0 end_request: I/O error, dev fd0, sector 0 end_request: I/O error, dev fd0, sector 0 end_request: I/O error, dev fd0, sector 0 end_request: I/O error, dev fd0, sector 0 end_request: I/O error, dev fd0, sector 0 end_request: I/O error, dev fd0, sector 0 end_request: I/O error, dev fd0, sector 0 end_request: I/O error, dev fd0, sector 0 end_request: I/O error, dev fd0, sector 0 end_request: I/O error, dev fd0, sector 0 end_request: I/O error, dev fd0, sector 0 end_request: I/O error, dev fd0, sector 0 11:09:58(UTC) Detected block devices: 11:09:58(UTC) {'/dev/sda': (8, 0, 104857600, 107.3741824, False)} 11:09:58(UTC) Usable block devices: 11:09:58(UTC) ['/dev/sda'] 11:09:58(UTC) Total size for all usable block devices: 107.37 Gb 11:09:58(UTC) Step: Install: Initializing. 11:09:58(UTC) Unmounting any previous mounts 11:09:58(UTC) sysexec >>> umount /tmp/mnt/sysimg/proc sysexec >>> umount /tmp/mnt/sysimg/proc 11:09:58(UTC) ==========stderr umount: /tmp/mnt/sysimg/proc: not found 11:09:58(UTC) sysexec >>> umount /tmp/mnt/sysimg/mnt/cdrom sysexec >>> umount /tmp/mnt/sysimg/mnt/cdrom 11:09:58(UTC) ==========stderr umount: /tmp/mnt/sysimg/mnt/cdrom: not found 11:09:58(UTC) sysexec >>> umount /tmp/mnt/sysimg/vservers sysexec >>> umount /tmp/mnt/sysimg/vservers 11:09:58(UTC) ==========stderr umount: /tmp/mnt/sysimg/vservers: not found 11:09:58(UTC) sysexec >>> umount /tmp/mnt/sysimg/sys sysexec >>> umount /tmp/mnt/sysimg/sys 11:09:58(UTC) ==========stderr umount: /tmp/mnt/sysimg/sys: not found 11:09:58(UTC) sysexec >>> umount /tmp/mnt/sysimg/dev sysexec >>> umount /tmp/mnt/sysimg/dev 11:09:58(UTC) ==========stderr umount: /tmp/mnt/sysimg/dev: not found 11:09:58(UTC) sysexec >>> umount /tmp/mnt/sysimg sysexec >>> umount /tmp/mnt/sysimg 11:09:58(UTC) ==========stderr umount: /tmp/mnt/sysimg: not found 11:09:58(UTC) Cleaning up any existing PlanetLab config files 11:09:58(UTC) Creating system image path 11:09:58(UTC) Step: Install: partitioning disks. 11:09:58(UTC) sysexec >>> swapoff /dev/mapper/planetlab-swap sysexec >>> swapoff /dev/mapper/planetlab-swap 11:09:58(UTC) ==========stderr swapoff: /dev/mapper/planetlab-swap: swapoff failed: No such file or directory 11:09:58(UTC) sysexec >>> vgscan sysexec >>> vgscan 11:09:58(UTC) ==========stdout Reading all physical volumes. This may take a while... 11:09:58(UTC) ==========stderr File descriptor 3 (/tmp/bm.log) leaked on vgscan invocation. Parent PID 631: /usr/bin/python No volume groups found 11:09:58(UTC) sysexec >>> vgchange -ay sysexec >>> vgchange -ay 11:09:58(UTC) ==========stderr File descriptor 3 (/tmp/bm.log) leaked on vgchange invocation. Parent PID 631: /usr/bin/python No volume groups found 11:09:58(UTC) sysexec >>> lvremove -f /dev/mapper/planetlab-root sysexec >>> lvremove -f /dev/mapper/planetlab-root 11:09:58(UTC) ==========stderr File descriptor 3 (/tmp/bm.log) leaked on lvremove invocation. Parent PID 631: /usr/bin/python Volume group "planetlab" not found Skipping volume group planetlab 11:09:58(UTC) sysexec >>> lvremove -f /dev/mapper/planetlab-swap sysexec >>> lvremove -f /dev/mapper/planetlab-swap 11:09:58(UTC) ==========stderr File descriptor 3 (/tmp/bm.log) leaked on lvremove invocation. Parent PID 631: /usr/bin/python Volume group "planetlab" not found Skipping volume group planetlab 11:09:58(UTC) sysexec >>> lvremove -f /dev/mapper/planetlab-vservers sysexec >>> lvremove -f /dev/mapper/planetlab-vservers 11:09:58(UTC) ==========stderr File descriptor 3 (/tmp/bm.log) leaked on lvremove invocation. Parent PID 631: /usr/bin/python Volume group "planetlab" not found Skipping volume group planetlab 11:09:58(UTC) sysexec >>> vgchange -an sysexec >>> vgchange -an 11:09:58(UTC) ==========stderr File descriptor 3 (/tmp/bm.log) leaked on vgchange invocation. Parent PID 631: /usr/bin/python No volume groups found 11:09:58(UTC) sysexec >>> vgremove -f planetlab sysexec >>> vgremove -f planetlab 11:09:58(UTC) ==========stderr File descriptor 3 (/tmp/bm.log) leaked on vgremove invocation. Parent PID 631: /usr/bin/python Volume group "planetlab" not found 11:09:58(UTC) Running vgscan for devices 11:09:58(UTC) sysexec >>> vgscan sysexec >>> vgscan 11:09:58(UTC) ==========stdout Reading all physical volumes. This may take a while... 11:09:58(UTC) ==========stderr File descriptor 3 (/tmp/bm.log) leaked on vgscan invocation. Parent PID 631: /usr/bin/python No volume groups found 11:09:58(UTC) Using pyparted 2.x 11:09:58(UTC) sysexec >>> dd if=/dev/zero of=/dev/sda bs=512 count=1 sysexec >>> dd if=/dev/zero of=/dev/sda bs=512 count=1 11:09:58(UTC) ==========stderr 1+0 records in 1+0 records out 512 bytes (512 B) copied, 0.0175478 s, 29.2 kB/s 11:09:58(UTC) Current disk for /dev/sda - partition type msdos parted.Disk instance -- type: msdos primaryPartitionCount: 1 lastPartitionNumber: 1 maxPrimaryPartitionCount: 4 partitions: [] device: PedDisk: <_ped.Disk object at 0xc10560> 11:09:58(UTC) Current dev for /dev/sda parted.Device instance -- model: ATA QEMU HARDDISK path: /dev/sda type: 1 sectorSize: 512 physicalSectorSize: 512 length: 209715200 openCount: 0 readOnly: False externalMode: False dirty: False bootDirty: False host: 1 did: 0 busy: False hardwareGeometry: (13054, 255, 63) biosGeometry: (13054, 255, 63) PedDevice: <_ped.Device object at 0x9acef0> 11:09:58(UTC) Successfully initialized /dev/sda 11:09:58(UTC) partitions=['/dev/sda1'] 11:09:58(UTC) sysexec >>> dd if=/dev/zero of=/dev/sda1 bs=512 count=1 sysexec >>> dd if=/dev/zero of=/dev/sda1 bs=512 count=1 11:09:58(UTC) ==========stderr 1+0 records in 1+0 records out 512 bytes (512 B) copied, 0.00053903 s, 950 kB/s 11:09:59(UTC) sysexec >>> pvcreate -ffy /dev/sda1 sysexec >>> pvcreate -ffy /dev/sda1 11:09:59(UTC) ==========stdout Physical volume "/dev/sda1" successfully created 11:09:59(UTC) ==========stderr File descriptor 3 (/tmp/bm.log) leaked on pvcreate invocation. Parent PID 631: /usr/bin/python 11:09:59(UTC) sysexec >>> vgcreate -s32M planetlab /dev/sda1 sysexec >>> vgcreate -s32M planetlab /dev/sda1 11:09:59(UTC) ==========stdout Volume group "planetlab" successfully created 11:09:59(UTC) ==========stderr File descriptor 3 (/tmp/bm.log) leaked on vgcreate invocation. Parent PID 631: /usr/bin/python 11:09:59(UTC) sysexec >>> lvcreate -L1G -nswap planetlab sysexec >>> lvcreate -L1G -nswap planetlab 11:09:59(UTC) ==========stdout Logical volume "swap" created 11:09:59(UTC) ==========stderr File descriptor 3 (/tmp/bm.log) leaked on lvcreate invocation. Parent PID 631: /usr/bin/python 11:09:59(UTC) sysexec >>> lvcreate -L14G -nroot planetlab sysexec >>> lvcreate -L14G -nroot planetlab 11:09:59(UTC) ==========stdout Logical volume "root" created 11:09:59(UTC) ==========stderr File descriptor 3 (/tmp/bm.log) leaked on lvcreate invocation. Parent PID 631: /usr/bin/python 11:09:59(UTC) sysexec >>> lvcreate -l2719 -nvservers planetlab sysexec >>> lvcreate -l2719 -nvservers planetlab 11:09:59(UTC) ==========stdout Logical volume "vservers" created 11:09:59(UTC) ==========stderr File descriptor 3 (/tmp/bm.log) leaked on lvcreate invocation. Parent PID 631: /usr/bin/python 11:09:59(UTC) sysexec >>> mkswap -f /dev/mapper/planetlab-swap sysexec >>> mkswap -f /dev/mapper/planetlab-swap 11:09:59(UTC) ==========stdout Setting up swapspace version 1, size = 1048572 KiB no label, UUID=e300f24a-8763-4bcb-830e-3dba35ce935e 11:09:59(UTC) formatting root partition (/dev/mapper/planetlab-root). 11:09:59(UTC) sysexec >>> mkfs.ext2 -q -m 5 -j /dev/mapper/planetlab-root sysexec >>> mkfs.ext2 -q -m 5 -j /dev/mapper/planetlab-root 11:10:01(UTC) sysexec >>> tune2fs -c -1 -i 0 /dev/mapper/planetlab-root sysexec >>> tune2fs -c -1 -i 0 /dev/mapper/planetlab-root 11:10:01(UTC) ==========stdout tune2fs 1.41.12 (17-May-2010) Setting maximal mount count to -1 Setting interval between checks to 0 seconds 11:10:01(UTC) formatting vservers partition (/dev/mapper/planetlab-vservers). 11:10:01(UTC) sysexec >>> mkfs.ext2 -q -m 0 -j /dev/mapper/planetlab-vservers sysexec >>> mkfs.ext2 -q -m 0 -j /dev/mapper/planetlab-vservers 11:10:12(UTC) sysexec >>> tune2fs -c -1 -i 0 /dev/mapper/planetlab-vservers sysexec >>> tune2fs -c -1 -i 0 /dev/mapper/planetlab-vservers 11:10:12(UTC) ==========stdout tune2fs 1.41.12 (17-May-2010) Setting maximal mount count to -1 Setting interval between checks to 0 seconds 11:10:12(UTC) Block devices used (in lvm): ['/dev/sda'] 11:10:12(UTC) End of InstallPartitionDisks - PARTITIONS status - BEG 11:10:12(UTC) sysexec >>> vgdisplay sysexec >>> vgdisplay 11:10:12(UTC) ==========stdout --- Volume group --- VG Name planetlab System ID Format lvm2 Metadata Areas 1 Metadata Sequence No 4 VG Access read/write VG Status resizable MAX LV 0 Cur LV 3 Open LV 0 Max PV 0 Cur PV 1 Act PV 1 VG Size 99.97 GiB PE Size 32.00 MiB Total PE 3199 Alloc PE / Size 3199 / 99.97 GiB Free PE / Size 0 / 0 VG UUID 5wbJQ8-K5EH-Byoj-Vwni-NHZP-PerH-ONdu3E 11:10:12(UTC) ==========stderr File descriptor 3 (/tmp/bm.log) leaked on vgdisplay invocation. Parent PID 631: /usr/bin/python 11:10:12(UTC) sysexec >>> pvdisplay sysexec >>> pvdisplay 11:10:12(UTC) ==========stdout --- Physical volume --- PV Name /dev/sda1 VG Name planetlab PV Size 100.00 GiB / not usable 30.66 MiB Allocatable yes (but full) PE Size 32.00 MiB Total PE 3199 Free PE 0 Allocated PE 3199 PV UUID b0fPec-73rD-yeTN-Ku0T-Ujh9-kF0z-UgTwsb 11:10:12(UTC) ==========stderr File descriptor 3 (/tmp/bm.log) leaked on pvdisplay invocation. Parent PID 631: /usr/bin/python 11:10:12(UTC) PARTITIONS[root]=/dev/mapper/planetlab-root 11:10:12(UTC) sysexec >>> ls -l /dev/mapper/planetlab-root sysexec >>> ls -l /dev/mapper/planetlab-root 11:10:12(UTC) ==========stdout lrwxrwxrwx 1 root root 7 Jan 18 11:09 /dev/mapper/planetlab-root -> ../dm-1 11:10:12(UTC) PARTITIONS[swap]=/dev/mapper/planetlab-swap 11:10:12(UTC) sysexec >>> ls -l /dev/mapper/planetlab-swap sysexec >>> ls -l /dev/mapper/planetlab-swap 11:10:12(UTC) ==========stdout lrwxrwxrwx 1 root root 7 Jan 18 11:09 /dev/mapper/planetlab-swap -> ../dm-0 11:10:12(UTC) PARTITIONS[vservers]=/dev/mapper/planetlab-vservers 11:10:12(UTC) sysexec >>> ls -l /dev/mapper/planetlab-vservers sysexec >>> ls -l /dev/mapper/planetlab-vservers 11:10:12(UTC) ==========stdout lrwxrwxrwx 1 root root 7 Jan 18 11:09 /dev/mapper/planetlab-vservers -> ../dm-2 11:10:12(UTC) End of InstallPartitionDisks - PARTITIONS status - END 11:10:12(UTC) Step: Install: bootstrapfs tarball (upgrade=False). 11:10:12(UTC) In InstallBootstrapFS - PARTITIONS status - BEG 11:10:12(UTC) sysexec >>> vgdisplay sysexec >>> vgdisplay 11:10:12(UTC) ==========stdout --- Volume group --- VG Name planetlab System ID Format lvm2 Metadata Areas 1 Metadata Sequence No 4 VG Access read/write VG Status resizable MAX LV 0 Cur LV 3 Open LV 0 Max PV 0 Cur PV 1 Act PV 1 VG Size 99.97 GiB PE Size 32.00 MiB Total PE 3199 Alloc PE / Size 3199 / 99.97 GiB Free PE / Size 0 / 0 VG UUID 5wbJQ8-K5EH-Byoj-Vwni-NHZP-PerH-ONdu3E 11:10:12(UTC) ==========stderr File descriptor 3 (/tmp/bm.log) leaked on vgdisplay invocation. Parent PID 631: /usr/bin/python 11:10:12(UTC) sysexec >>> pvdisplay sysexec >>> pvdisplay 11:10:12(UTC) ==========stdout --- Physical volume --- PV Name /dev/sda1 VG Name planetlab PV Size 100.00 GiB / not usable 30.66 MiB Allocatable yes (but full) PE Size 32.00 MiB Total PE 3199 Free PE 0 Allocated PE 3199 PV UUID b0fPec-73rD-yeTN-Ku0T-Ujh9-kF0z-UgTwsb 11:10:12(UTC) ==========stderr File descriptor 3 (/tmp/bm.log) leaked on pvdisplay invocation. Parent PID 631: /usr/bin/python 11:10:12(UTC) PARTITIONS[root]=/dev/mapper/planetlab-root 11:10:12(UTC) sysexec >>> ls -l /dev/mapper/planetlab-root sysexec >>> ls -l /dev/mapper/planetlab-root 11:10:12(UTC) ==========stdout lrwxrwxrwx 1 root root 7 Jan 18 11:09 /dev/mapper/planetlab-root -> ../dm-1 11:10:12(UTC) PARTITIONS[swap]=/dev/mapper/planetlab-swap 11:10:12(UTC) sysexec >>> ls -l /dev/mapper/planetlab-swap sysexec >>> ls -l /dev/mapper/planetlab-swap 11:10:12(UTC) ==========stdout lrwxrwxrwx 1 root root 7 Jan 18 11:09 /dev/mapper/planetlab-swap -> ../dm-0 11:10:12(UTC) PARTITIONS[vservers]=/dev/mapper/planetlab-vservers 11:10:12(UTC) sysexec >>> ls -l /dev/mapper/planetlab-vservers sysexec >>> ls -l /dev/mapper/planetlab-vservers 11:10:12(UTC) ==========stdout lrwxrwxrwx 1 root root 7 Jan 18 11:09 /dev/mapper/planetlab-vservers -> ../dm-2 11:10:12(UTC) In InstallBootstrapFS - PARTITIONS status - END Ignoring breakpoint (BREAKPOINT_MODE=False) : we need to make /dev/mapper/* appear 11:10:12(UTC) turning on swap space 11:10:12(UTC) sysexec >>> swapon /dev/mapper/planetlab-swap sysexec >>> swapon /dev/mapper/planetlab-swap Adding 1048568k swap on /dev/mapper/planetlab-swap. Priority:-1 extents:1 across:1048568k D 11:10:12(UTC) mounting root file system 11:10:12(UTC) sysexec >>> mount -t ext3 /dev/mapper/planetlab-root /tmp/mnt/sysimg sysexec >>> mount -t ext3 /dev/mapper/planetlab-root /tmp/mnt/sysimg kjournald starting. Commit interval 5 seconds EXT3-fs (dm-1): using internal journal EXT3-fs (dm-1): mounted filesystem with ordered data mode 11:10:12(UTC) mounting vserver partition in root file system (type ext3) 11:10:12(UTC) sysexec >>> mount -t ext3 /dev/mapper/planetlab-vservers /tmp/mnt/sysimg/vservers sysexec >>> mount -t ext3 /dev/mapper/planetlab-vservers /tmp/mnt/sysimg/vservers kjournald starting. Commit interval 5 seconds EXT3-fs (dm-2): using internal journal EXT3-fs (dm-2): mounted filesystem with ordered data mode 11:10:12(UTC) Using compressed bootstrapfs images 11:10:12(UTC) Using nodefamily=onelab-f14-x86_64 11:10:12(UTC) Installing only core software 11:10:12(UTC) downloading /boot/bootstrapfs-onelab-f14-x86_64.tar.bz2 11:10:20(UTC) Done downloading (7 seconds) 11:10:20(UTC) downloading sha1sum for /boot/bootstrapfs-onelab-f14-x86_64.tar.bz2 11:10:20(UTC) verifying sha1sum for /boot/bootstrapfs-onelab-f14-x86_64.tar.bz2 11:10:20(UTC) extracting /tmp/mnt/sysimg/bootstrapfs-onelab-f14-x86_64.tar.bz2 in /tmp/mnt/sysimg 11:10:20(UTC) sysexec >>> tar -C /tmp/mnt/sysimg -xpf /tmp/mnt/sysimg/bootstrapfs-onelab-f14-x86_64.tar.bz2 -j sysexec >>> tar -C /tmp/mnt/sysimg -xpf /tmp/mnt/sysimg/bootstrapfs-onelab-f14-x86_64.tar.bz2 -j 11:11:06(UTC) Done extracting (46 seconds) 11:11:06(UTC) Copying resolv.conf to temp dir 11:11:06(UTC) sysexec >>> cp /etc/resolv.conf /tmp/mnt/sysimg/etc/ sysexec >>> cp /etc/resolv.conf /tmp/mnt/sysimg/etc/ 11:11:06(UTC) Copying boot server certificates and public key 11:11:06(UTC) sysexec (shell mode) >>> gpg --homedir=/root --export --armor --no-default-keyring --keyring /tmp/mnt/sysimg/usr/boot/pubring.gpg > /tmp/mnt/sysimg/etc/pki/rpm-gpg/RPM-GPG-KEY-planetlabsysexec (shell mode) >>> gpg --homedir=/root --export --armor --no-default-keyring --keyring /tmp/mnt/sysimg/usr/boot/pubring.gpg > /tmp/mnt/sysimg/etc/pki/rpm-gpg/RPM-GPG-KEY-planetlab 11:11:06(UTC) sysexec >>> chroot /tmp/mnt/sysimg rpm --import /etc/pki/rpm-gpg/RPM-GPG-KEY-planetlab sysexec >>> chroot /tmp/mnt/sysimg rpm --import /etc/pki/rpm-gpg/RPM-GPG-KEY-planetlab 11:11:07(UTC) Step: Install: Writing configuration files. 11:11:07(UTC) Setting local time to UTC 11:11:07(UTC) sysexec >>> chroot /tmp/mnt/sysimg ln -sf /usr/share/zoneinfo/UTC /etc/localtime sysexec >>> chroot /tmp/mnt/sysimg ln -sf /usr/share/zoneinfo/UTC /etc/localtime 11:11:07(UTC) Creating system directory /etc/planetlab 11:11:07(UTC) Writing system /etc/fstab 11:11:07(UTC) Writing system /etc/issue 11:11:07(UTC) Setting up authentication (non-ssh) 11:11:07(UTC) sysexec >>> chroot /tmp/mnt/sysimg authconfig --nostart --kickstart --enablemd5 --enableshadow sysexec >>> chroot /tmp/mnt/sysimg authconfig --nostart --kickstart --enablemd5 --enableshadow 11:11:07(UTC) sysexec (shell mode) >>> sed -e 's/^root\:\:/root\:*\:/g' /tmp/mnt/sysimg/etc/shadow > /tmp/mnt/sysimg/etc/shadow.newsysexec (shell mode) >>> sed -e 's/^root\:\:/root\:*\:/g' /tmp/mnt/sysimg/etc/shadow > /tmp/mnt/sysimg/etc/shadow.new 11:11:07(UTC) sysexec >>> chroot /tmp/mnt/sysimg mv /etc/shadow.new /etc/shadow sysexec >>> chroot /tmp/mnt/sysimg mv /etc/shadow.new /etc/shadow 11:11:07(UTC) sysexec >>> chroot /tmp/mnt/sysimg chmod 400 /etc/shadow sysexec >>> chroot /tmp/mnt/sysimg chmod 400 /etc/shadow 11:11:07(UTC) Writing node install_version 11:11:07(UTC) Creating ssh host keys 11:11:07(UTC) Generating SSH1 RSA host key /etc/ssh/ssh_host_key (mandatory success=False) sysexec (shell mode) >>> chroot /usr/bin/ssh-keygen -q -t rsa1 -f /etc/ssh/ssh_host_key -C '' -N '' <__main__.log instance at 0xc08ab8> /bin/sh: -c: line 0: syntax error near unexpected token `newline' /bin/sh: -c: line 0: `chroot /usr/bin/ssh-keygen -q -t rsa1 -f /etc/ssh/ssh_host_key -C '' -N '' <__main__.log instance at 0xc08ab8>' 11:11:07(UTC) sysexec >>> chmod 600 /tmp/mnt/sysimg//etc/ssh/ssh_host_key sysexec >>> chmod 600 /tmp/mnt/sysimg//etc/ssh/ssh_host_key 11:11:07(UTC) ==========stderr chmod: cannot access `/tmp/mnt/sysimg//etc/ssh/ssh_host_key': No such file or directory 11:11:07(UTC) sysexec >>> chmod 644 /tmp/mnt/sysimg//etc/ssh/ssh_host_key.pub sysexec >>> chmod 644 /tmp/mnt/sysimg//etc/ssh/ssh_host_key.pub 11:11:07(UTC) ==========stderr chmod: cannot access `/tmp/mnt/sysimg//etc/ssh/ssh_host_key.pub': No such file or directory 11:11:07(UTC) Generating SSH2 RSA host key /etc/ssh/ssh_host_rsa_key (mandatory success=True) 11:11:07(UTC) sysexec >>> chroot /tmp/mnt/sysimg /usr/bin/ssh-keygen -q -t rsa -f /etc/ssh/ssh_host_rsa_key -C '' -N '' sysexec >>> chroot /tmp/mnt/sysimg /usr/bin/ssh-keygen -q -t rsa -f /etc/ssh/ssh_host_rsa_key -C '' -N '' 11:11:07(UTC) sysexec >>> chmod 600 /tmp/mnt/sysimg//etc/ssh/ssh_host_rsa_key sysexec >>> chmod 600 /tmp/mnt/sysimg//etc/ssh/ssh_host_rsa_key 11:11:07(UTC) sysexec >>> chmod 644 /tmp/mnt/sysimg//etc/ssh/ssh_host_rsa_key.pub sysexec >>> chmod 644 /tmp/mnt/sysimg//etc/ssh/ssh_host_rsa_key.pub 11:11:07(UTC) Generating SSH2 DSA host key /etc/ssh/ssh_host_dsa_key (mandatory success=True) 11:11:07(UTC) sysexec >>> chroot /tmp/mnt/sysimg /usr/bin/ssh-keygen -q -t dsa -f /etc/ssh/ssh_host_dsa_key -C '' -N '' sysexec >>> chroot /tmp/mnt/sysimg /usr/bin/ssh-keygen -q -t dsa -f /etc/ssh/ssh_host_dsa_key -C '' -N '' 11:11:07(UTC) sysexec >>> chmod 600 /tmp/mnt/sysimg//etc/ssh/ssh_host_dsa_key sysexec >>> chmod 600 /tmp/mnt/sysimg//etc/ssh/ssh_host_dsa_key 11:11:07(UTC) sysexec >>> chmod 644 /tmp/mnt/sysimg//etc/ssh/ssh_host_dsa_key.pub sysexec >>> chmod 644 /tmp/mnt/sysimg//etc/ssh/ssh_host_dsa_key.pub 11:11:07(UTC) Step: Install: Shutting down installer. 11:11:07(UTC) Shutting down swap 11:11:07(UTC) sysexec >>> swapoff /dev/mapper/planetlab-swap sysexec >>> swapoff /dev/mapper/planetlab-swap 11:11:07(UTC) Step: Running Ansible Hook 11:11:07(UTC) No Ansible directive. Skipping. 11:11:07(UTC) Step: Updating node boot state at PLC. 11:11:12(UTC) Successfully updated boot state for this node at PLC 11:11:16(UTC) Step: Starting fallback sshd. 11:11:16(UTC) sysexec >>> cp -f /tmp/source/debug_files//sshd_config /etc/ssh//sshd_config sysexec >>> cp -f /tmp/source/debug_files//sshd_config /etc/ssh//sshd_config 11:11:16(UTC) Installing debug ssh key for root user 11:11:16(UTC) sysexec >>> cp -f /tmp/source/debug_files//debug_root_ssh_key /root/.ssh/authorized_keys sysexec >>> cp -f /tmp/source/debug_files//debug_root_ssh_key /root/.ssh/authorized_keys 11:11:16(UTC) sysexec >>> chmod 700 /root/.ssh sysexec >>> chmod 700 /root/.ssh 11:11:16(UTC) sysexec >>> chmod 600 /root/.ssh/authorized_keys sysexec >>> chmod 600 /root/.ssh/authorized_keys 11:11:16(UTC) sshd is already running 11:11:16(UTC) Step: Install: Initializing. 11:11:16(UTC) Unmounting any previous mounts 11:11:16(UTC) sysexec >>> umount /tmp/mnt/sysimg/proc sysexec >>> umount /tmp/mnt/sysimg/proc 11:11:16(UTC) ==========stderr umount: /tmp/mnt/sysimg/proc: not mounted 11:11:16(UTC) sysexec >>> umount /tmp/mnt/sysimg/mnt/cdrom sysexec >>> umount /tmp/mnt/sysimg/mnt/cdrom 11:11:16(UTC) ==========stderr umount: /tmp/mnt/sysimg/mnt/cdrom: not mounted 11:11:16(UTC) sysexec >>> umount /tmp/mnt/sysimg/vservers sysexec >>> umount /tmp/mnt/sysimg/vservers 11:11:16(UTC) sysexec >>> umount /tmp/mnt/sysimg/sys sysexec >>> umount /tmp/mnt/sysimg/sys 11:11:16(UTC) ==========stderr umount: /tmp/mnt/sysimg/sys: not mounted 11:11:16(UTC) sysexec >>> umount /tmp/mnt/sysimg/dev sysexec >>> umount /tmp/mnt/sysimg/dev 11:11:16(UTC) ==========stderr umount: /tmp/mnt/sysimg/dev: not mounted 11:11:16(UTC) sysexec >>> umount /tmp/mnt/sysimg sysexec >>> umount /tmp/mnt/sysimg 11:11:16(UTC) Cleaning up any existing PlanetLab config files 11:11:16(UTC) Creating system image path 11:11:16(UTC) Step: Validating node installation. 11:11:16(UTC) sysexec >>> vgscan sysexec >>> vgscan 11:11:16(UTC) ==========stdout Reading all physical volumes. This may take a while... Found volume group "planetlab" using metadata type lvm2 11:11:16(UTC) ==========stderr File descriptor 3 (/tmp/bm.log) leaked on vgscan invocation. Parent PID 631: /usr/bin/python 11:11:16(UTC) sysexec >>> vgchange -ay planetlab sysexec >>> vgchange -ay planetlab 11:11:16(UTC) ==========stdout 3 logical volume(s) in volume group "planetlab" now active 11:11:16(UTC) ==========stderr File descriptor 3 (/tmp/bm.log) leaked on vgchange invocation. Parent PID 631: /usr/bin/python 11:11:16(UTC) fsck root file system 11:11:16(UTC) sysexec >>> e2fsck -v -p /dev/mapper/planetlab-root sysexec >>> e2fsck -v -p /dev/mapper/planetlab-root 11:11:16(UTC) ==========stdout /dev/mapper/planetlab-root: clean, 19611/917504 files, 244530/3670016 blocks 11:11:16(UTC) sysexec >>> tune2fs -c -1 -i 0 /dev/mapper/planetlab-root sysexec >>> tune2fs -c -1 -i 0 /dev/mapper/planetlab-root 11:11:16(UTC) ==========stdout tune2fs 1.41.12 (17-May-2010) Setting maximal mount count to -1 Setting interval between checks to 0 seconds 11:11:16(UTC) fsck vservers file system 11:11:16(UTC) sysexec >>> e2fsck -v -p /dev/mapper/planetlab-vservers sysexec >>> e2fsck -v -p /dev/mapper/planetlab-vservers 11:11:16(UTC) ==========stdout /dev/mapper/planetlab-vservers: clean, 24360/5570560 files, 512232/22274048 blocks 11:11:16(UTC) sysexec >>> tune2fs -c -1 -i 0 /dev/mapper/planetlab-vservers sysexec >>> tune2fs -c -1 -i 0 /dev/mapper/planetlab-vservers 11:11:16(UTC) ==========stdout tune2fs 1.41.12 (17-May-2010) Setting maximal mount count to -1 Setting interval between checks to 0 seconds 11:11:16(UTC) mounting root file system 11:11:16(UTC) sysexec >>> mount -t ext3 /dev/mapper/planetlab-root /tmp/mnt/sysimg sysexec >>> mount -t ext3 /dev/mapper/planetlab-root /tmp/mnt/sysimg kjournald starting. Commit interval 5 seconds EXT3-fs (dm-1): using internal journal EXT3-fs (dm-1): mounted filesystem with ordered data mode 11:11:16(UTC) mounting /proc 11:11:16(UTC) sysexec >>> mount -t proc none /tmp/mnt/sysimg/proc sysexec >>> mount -t proc none /tmp/mnt/sysimg/proc 11:11:16(UTC) mounting vservers partition in root file system 11:11:16(UTC) sysexec >>> mount -t ext3 /dev/mapper/planetlab-vservers /tmp/mnt/sysimg/vservers sysexec >>> mount -t ext3 /dev/mapper/planetlab-vservers /tmp/mnt/sysimg/vservers kjournald starting. Commit interval 5 seconds EXT3-fs (dm-2): using internal journal EXT3-fs (dm-2): mounted filesystem with ordered data mode 11:11:16(UTC) Checking for a custom kernel 11:11:16(UTC) Updated /etc/planetlab/node_id 11:11:16(UTC) Node installation appears to be ok 11:11:16(UTC) Step: WriteModProbeConfig. Using kernel version 2.6.32-36.onelab.x86_64 11:11:16(UTC) Contents of new modprobe.conf file: 11:11:16(UTC) # Written out by BootManager alias eth0 e1000 alias scsi_hostadapter0 ata_piix alias scsi_hostadapter1 pata_acpi options ata_generic all_generic_ide=1 11:11:16(UTC) End contents of new modprobe.conf file. 11:11:16(UTC) Step: Install: Writing Network Configuration files. 11:11:16(UTC) Writing /etc/planetlab/plc_config 11:11:16(UTC) getting via https://vplc02.pl.sophia.inria.fr/PlanetLabConf/get_plc_config.php 11:11:20(UTC) Done 11:11:20(UTC) Writing /etc/hosts 11:11:20(UTC) net:InitInterfaces interface 1: {'last_updated': None, 'network': '138.96.112.0', 'ip': '138.96.112.102', 'dns1': '138.96.112.1', 'hostname': None, 'netmask': '255.255.248.0', 'interface_tag_ids': [], 'interface_id': 1, 'broadcast': '138.96.119.255', 'method': 'static', 'mac': '02:34:56:00:00:02', 'node_id': 1, 'gateway': '138.96.112.250', 'dns2': '138.96.112.2', 'is_primary': True, 'type': 'ipv4', 'bwlimit': None} 11:11:20(UTC) net:InitInterfaces macs = {'02:34:56:00:00:02': 'eth0', '00:00:00:00:00:00': 'lo'} 11:11:20(UTC) net:InitInterfaces ips = {'138.96.112.102': 'eth0', '127.0.0.1': 'lo'} 11:11:20(UTC) net:InitInterfaces orig_ifname = eth0 11:11:20(UTC) net:InitInterfaces: Device map: {'eth0': {'USERCTL': 'no', 'DNS2': '138.96.112.2', 'DNS1': '138.96.112.1', 'IPADDR': '138.96.112.102', 'PRIMARY': 'yes', 'GATEWAY': '138.96.112.250', 'NETMASK': '255.255.248.0', 'BOOTPROTO': 'static', 'HWADDR': '02:34:56:00:00:02', 'ONBOOT': 'yes'}} 11:11:20(UTC) net:InitInterfaces adding configuration for eth0 11:11:20(UTC) Step: Checking for unused disks to add to LVM. 11:11:20(UTC) In CheckForNewDisks - PARTITIONS status - BEG 11:11:20(UTC) sysexec >>> vgdisplay sysexec >>> vgdisplay 11:11:20(UTC) ==========stdout --- Volume group --- VG Name planetlab System ID Format lvm2 Metadata Areas 1 Metadata Sequence No 4 VG Access read/write VG Status resizable MAX LV 0 Cur LV 3 Open LV 2 Max PV 0 Cur PV 1 Act PV 1 VG Size 99.97 GiB PE Size 32.00 MiB Total PE 3199 Alloc PE / Size 3199 / 99.97 GiB Free PE / Size 0 / 0 VG UUID 5wbJQ8-K5EH-Byoj-Vwni-NHZP-PerH-ONdu3E 11:11:20(UTC) ==========stderr File descriptor 3 (/tmp/bm.log) leaked on vgdisplay invocation. Parent PID 631: /usr/bin/python 11:11:20(UTC) sysexec >>> pvdisplay sysexec >>> pvdisplay 11:11:20(UTC) ==========stdout --- Physical volume --- PV Name /dev/sda1 VG Name planetlab PV Size 100.00 GiB / not usable 30.66 MiB Allocatable yes (but full) PE Size 32.00 MiB Total PE 3199 Free PE 0 Allocated PE 3199 PV UUID b0fPec-73rD-yeTN-Ku0T-Ujh9-kF0z-UgTwsb 11:11:21(UTC) ==========stderr File descriptor 3 (/tmp/bm.log) leaked on pvdisplay invocation. Parent PID 631: /usr/bin/python 11:11:21(UTC) PARTITIONS[root]=/dev/mapper/planetlab-root 11:11:21(UTC) sysexec >>> ls -l /dev/mapper/planetlab-root sysexec >>> ls -l /dev/mapper/planetlab-root 11:11:21(UTC) ==========stdout lrwxrwxrwx 1 root root 7 Jan 18 11:09 /dev/mapper/planetlab-root -> ../dm-1 11:11:21(UTC) PARTITIONS[swap]=/dev/mapper/planetlab-swap 11:11:21(UTC) sysexec >>> ls -l /dev/mapper/planetlab-swap sysexec >>> ls -l /dev/mapper/planetlab-swap 11:11:21(UTC) ==========stdout lrwxrwxrwx 1 root root 7 Jan 18 11:09 /dev/mapper/planetlab-swap -> ../dm-0 11:11:21(UTC) PARTITIONS[vservers]=/dev/mapper/planetlab-vservers 11:11:21(UTC) sysexec >>> ls -l /dev/mapper/planetlab-vservers sysexec >>> ls -l /dev/mapper/planetlab-vservers 11:11:21(UTC) ==========stdout lrwxrwxrwx 1 root root 7 Jan 18 11:09 /dev/mapper/planetlab-vservers -> ../dm-2 11:11:21(UTC) In CheckForNewDisks - PARTITIONS status - END 11:11:21(UTC) Checking device /dev/sda to see if it is part of the volume group. 11:11:21(UTC) sysexec (shell mode) >>> pvdisplay /dev/sda1 | grep -q planetlabsysexec (shell mode) >>> pvdisplay /dev/sda1 | grep -q planetlab File descriptor 3 (/tmp/bm.log) leaked on pvdisplay invocation. Parent PID 1453: /bin/sh 11:11:21(UTC) It appears /dev/sda is part of the volume group, continuing. 11:11:21(UTC) No new disk devices to add to volume group. 11:11:21(UTC) Step: Sending hardware configuration to PLC. 11:11:21(UTC) step SendHardwareConfigToPLC Not implemented, continuing. 11:11:21(UTC) Step: Chain booting node. 11:11:21(UTC) In ChainBootNode - PARTITIONS status - BEG 11:11:21(UTC) sysexec >>> vgdisplay sysexec >>> vgdisplay 11:11:21(UTC) ==========stdout --- Volume group --- VG Name planetlab System ID Format lvm2 Metadata Areas 1 Metadata Sequence No 4 VG Access read/write VG Status resizable MAX LV 0 Cur LV 3 Open LV 2 Max PV 0 Cur PV 1 Act PV 1 VG Size 99.97 GiB PE Size 32.00 MiB Total PE 3199 Alloc PE / Size 3199 / 99.97 GiB Free PE / Size 0 / 0 VG UUID 5wbJQ8-K5EH-Byoj-Vwni-NHZP-PerH-ONdu3E 11:11:21(UTC) ==========stderr File descriptor 3 (/tmp/bm.log) leaked on vgdisplay invocation. Parent PID 631: /usr/bin/python 11:11:21(UTC) sysexec >>> pvdisplay sysexec >>> pvdisplay 11:11:21(UTC) ==========stdout --- Physical volume --- PV Name /dev/sda1 VG Name planetlab PV Size 100.00 GiB / not usable 30.66 MiB Allocatable yes (but full) PE Size 32.00 MiB Total PE 3199 Free PE 0 Allocated PE 3199 PV UUID b0fPec-73rD-yeTN-Ku0T-Ujh9-kF0z-UgTwsb 11:11:21(UTC) ==========stderr File descriptor 3 (/tmp/bm.log) leaked on pvdisplay invocation. Parent PID 631: /usr/bin/python 11:11:21(UTC) PARTITIONS[root]=/dev/mapper/planetlab-root 11:11:21(UTC) sysexec >>> ls -l /dev/mapper/planetlab-root sysexec >>> ls -l /dev/mapper/planetlab-root 11:11:21(UTC) ==========stdout lrwxrwxrwx 1 root root 7 Jan 18 11:09 /dev/mapper/planetlab-root -> ../dm-1 11:11:21(UTC) PARTITIONS[swap]=/dev/mapper/planetlab-swap 11:11:21(UTC) sysexec >>> ls -l /dev/mapper/planetlab-swap sysexec >>> ls -l /dev/mapper/planetlab-swap 11:11:21(UTC) ==========stdout lrwxrwxrwx 1 root root 7 Jan 18 11:09 /dev/mapper/planetlab-swap -> ../dm-0 11:11:21(UTC) PARTITIONS[vservers]=/dev/mapper/planetlab-vservers 11:11:21(UTC) sysexec >>> ls -l /dev/mapper/planetlab-vservers sysexec >>> ls -l /dev/mapper/planetlab-vservers 11:11:21(UTC) ==========stdout lrwxrwxrwx 1 root root 7 Jan 18 11:09 /dev/mapper/planetlab-vservers -> ../dm-2 11:11:21(UTC) In ChainBootNode - PARTITIONS status - END 11:11:21(UTC) Updated /etc/planetlab/session 11:11:21(UTC) Updating configuration files. 11:11:21(UTC) sysexec >>> chroot /tmp/mnt/sysimg /usr/bin/env python /usr/share/NodeManager/conf_files.py --noscripts sysexec >>> chroot /tmp/mnt/sysimg /usr/bin/env python /usr/share/NodeManager/conf_files.py --noscripts 11:11:58(UTC) Running node update. 11:11:58(UTC) sysexec >>> chroot /tmp/mnt/sysimg /usr/bin/NodeUpdate.py start noreboot sysexec >>> chroot /tmp/mnt/sysimg /usr/bin/NodeUpdate.py start noreboot 11:12:30(UTC) ==========stdout Config time: 0.003 Yum Version: 3.2.28 Setting up Package Sacks pkgsack time: 21.462 rpmdb time: 0.000 Setting up Update Process Building updates object up:Obs Init time: 0.265 up:simple updates time: 0.133 up:obs time: 0.031 up:condense time: 0.000 updates time: 1.101 No Packages marked for Update Config time: 0.006 Yum Version: 3.2.28 Setting up Package Sacks pkgsack time: 0.049 rpmdb time: 0.000 Setting up Update Process Building updates object up:Obs Init time: 0.270 up:simple updates time: 0.131 up:obs time: 0.029 up:condense time: 0.000 updates time: 1.184 No Packages marked for Update Config time: 0.004 Yum Version: 3.2.28 Setting up Package Sacks pkgsack time: 0.031 rpmdb time: 0.000 Setting up Install Process Checking for virtual provide or file-provide for nodemanager-lxc No package nodemanager-lxc available. Config time: 0.003 Yum Version: 3.2.28 Setting up Package Sacks pkgsack time: 0.025 rpmdb time: 0.000 Setting up Update Process Building updates object up:Obs Init time: 0.273 up:simple updates time: 0.133 up:obs time: 0.030 up:condense time: 0.000 updates time: 1.137 No Packages marked for Update Config time: 0.003 Yum Version: 3.2.28 Setting up Package Sacks pkgsack time: 0.025 rpmdb time: 0.000 Setting up Group Process group time: 1.279 Adding package openssh-clients from group planetlab Building updates object up:Obs Init time: 0.268 up:simple updates time: 0.134 up:obs time: 0.031 up:condense time: 0.000 updates time: 1.097 Package openssh-clients-5.5p1-24.fc14.2.x86_64 already installed and latest version Adding package util-vserver-sysv from group planetlab Package util-vserver-sysv-0.30.216-21.x86_64 already installed and latest version Adding package iputils from group planetlab Package iputils-20100418-3.fc14.x86_64 already installed and latest version Adding package kbd from group planetlab Package kbd-1.15-11.fc14.x86_64 already installed and latest version Adding package iproute from group planetlab Package iproute-2.6.35-9.fc14.x86_64 already installed and latest version Adding package rsyslog from group planetlab Package rsyslog-4.6.3-3.fc14.x86_64 already installed and latest version Adding package tmpwatch from group planetlab Package tmpwatch-2.10-1.fc14.x86_64 already installed and latest version Adding package util-vserver-core from group planetlab Package util-vserver-core-0.30.216-21.x86_64 already installed and latest version Adding package vsys-scripts from group planetlab Package vsys-scripts-0.95-51.onelab.x86_64 already installed and latest version Adding package basesystem from group planetlab Package basesystem-10.0-3.noarch already installed and latest version Adding package openvpn from group planetlab Package openvpn-2.1.1-2.fc13.x86_64 already installed and latest version Adding package iptables from group planetlab Package iptables-1.4.10-5.onelab.x86_64 already installed and latest version Adding package psacct from group planetlab Package psacct-6.5.4-5.fc14.x86_64 already installed and latest version Adding package PyXML from group planetlab Package PyXML-0.8.4-25.fc14.x86_64 already installed and latest version Adding package python from group planetlab Package python-2.7-8.fc14.1.x86_64 already installed and latest version Adding package cpio from group planetlab Package cpio-2.11-2.fc14.x86_64 already installed and latest version Adding package python3 from group planetlab Package python3-3.1.2-14.fc14.x86_64 already installed and latest version Adding package dhclient from group planetlab Package 12:dhclient-4.2.0-23.P2.fc14.x86_64 already installed and latest version Adding package madwifi from group planetlab No package named madwifi available to be installed Adding package nrpe from group planetlab Package nrpe-2.12-16.fc14.x86_64 already installed and latest version Adding package vsys from group planetlab Package vsys-0.99-3.onelab.x86_64 already installed and latest version Adding package libnl from group planetlab Package libnl-1.1-14.fc14.x86_64 already installed and latest version Adding package ipfwroot from group planetlab Package ipfwroot-3-2.6.32.36.1.onelab.2016.01.18.x86_64 already installed and latest version Adding package kernel from group planetlab Package kernel-2.6.32-36.onelab.x86_64 already installed and latest version Adding package parted from group planetlab Package parted-2.3-5.fc14.x86_64 already installed and latest version Adding package vconfig from group planetlab Package vconfig-1.9-8.fc12.x86_64 already installed and latest version Adding package vserver-sliceimage from group planetlab Package vserver-sliceimage-5.1-10.onelab.2016.01.18.noarch already installed and latest version Adding package ed from group planetlab Package ed-1.4-2.fc14.x86_64 already installed and latest version Adding package udev from group planetlab Package udev-161-10.fc14.x86_64 already installed and latest version Adding package monitor-client from group planetlab Package monitor-client-3.1-6.onelab.x86_64 already installed and latest version Adding package setserial from group planetlab Package setserial-2.17-26.fc14.x86_64 already installed and latest version Adding package mailcap from group planetlab Package mailcap-2.1.35-1.fc14.noarch already installed and latest version Adding package rsync from group planetlab Package rsync-3.0.8-2.fc14.x86_64 already installed and latest version Adding package sliceimage-system-onelab-f14-x86_64 from group planetlab Package sliceimage-system-onelab-f14-x86_64-5.1-10.2016.01.18.x86_64 already installed and latest version Adding package glibc from group planetlab Package glibc-2.13-2.x86_64 already installed and latest version Adding package bc from group planetlab Package bc-1.06.95-2.fc14.x86_64 already installed and latest version Adding package shadow-utils from group planetlab Package 2:shadow-utils-4.1.4.2-11.fc14.x86_64 already installed and latest version Adding package emacs-nox from group planetlab Package 1:emacs-nox-23.2-7.fc14.x86_64 already installed and latest version Adding package util-linux-ng from group planetlab Package util-linux-ng-2.18-4.8.fc14.x86_64 already installed and latest version Adding package sendmail from group planetlab Package sendmail-8.14.4-10.fc14.x86_64 already installed and latest version Adding package ntp from group planetlab Package ntp-4.2.6p3-0.1.rc10.fc14.x86_64 already installed and latest version Adding package ipod from group planetlab Package ipod-2.2-1.onelab.x86_64 already installed and latest version Adding package fprobe-ulog from group planetlab Package fprobe-ulog-1.1.4-3.onelab.x86_64 already installed and latest version Adding package wget from group planetlab Package wget-1.12-4.fc14.x86_64 already installed and latest version Adding package bash from group planetlab Package bash-4.1.7-4.fc14.x86_64 already installed and latest version Adding package rootfiles from group planetlab Package rootfiles-8.1-6.fc12.noarch already installed and latest version Adding package ethtool from group planetlab Package 2:ethtool-2.6.39-1.fc14.x86_64 already installed and latest version Adding package bind-utils from group planetlab Package 32:bind-utils-9.7.4-2.P1.fc14.x86_64 already installed and latest version Adding package yum from group planetlab Package yum-3.2.28-7.fc14.noarch already installed and latest version Adding package lsof from group planetlab Package lsof-4.83-2.fc14.x86_64 already installed and latest version Adding package lvm2 from group planetlab Package lvm2-2.02.84-2.fc14.x86_64 already installed and latest version Adding package rpm from group planetlab Package rpm-4.8.1-7.fc14.x86_64 already installed and latest version Adding package vim-minimal from group planetlab Package 2:vim-minimal-7.3.315-1.fc14.x86_64 already installed and latest version Adding package util-vserver-legacy from group planetlab Package util-vserver-legacy-0.30.216-21.x86_64 already installed and latest version Adding package codemux from group planetlab Package codemux-0.1-15.onelab.x86_64 already installed and latest version Adding package perl from group planetlab Package 4:perl-5.12.4-148.fc14.x86_64 already installed and latest version Adding package util-vserver-build from group planetlab Package util-vserver-build-0.30.216-21.x86_64 already installed and latest version Adding package dracut from group planetlab Package dracut-006-6.fc14.noarch already installed and latest version Adding package tcpdump from group planetlab Package 14:tcpdump-4.1.1-1.fc14.x86_64 already installed and latest version Adding package rsh from group planetlab Package rsh-0.17-63.fc14.x86_64 already installed and latest version Adding package NodeUpdate from group planetlab Package NodeUpdate-0.5-14.onelab.x86_64 already installed and latest version Adding package openssh-server from group planetlab Package openssh-server-5.5p1-24.fc14.2.x86_64 already installed and latest version Adding package nfs-utils from group planetlab Package 1:nfs-utils-1.2.3-6.fc14.x86_64 already installed and latest version Adding package util-vserver from group planetlab Package util-vserver-0.30.216-21.x86_64 already installed and latest version Adding package sliceimage-onelab-f14-x86_64 from group planetlab Package sliceimage-onelab-f14-x86_64-5.1-10.2016.01.18.x86_64 already installed and latest version Adding package authconfig from group planetlab Package authconfig-6.1.11-1.fc14.x86_64 already installed and latest version Adding package hdparm from group planetlab Package hdparm-9.27-1.fc13.x86_64 already installed and latest version Adding package setup from group planetlab Package setup-2.8.28-2.fc14.noarch already installed and latest version Adding package initscripts from group planetlab Package initscripts-9.20.2-1.fc14.1.x86_64 already installed and latest version Adding package pl_sshd from group planetlab Package pl_sshd-1.0-11.onelab.x86_64 already installed and latest version Adding package procps from group planetlab Package procps-3.2.8-15.fc14.x86_64 already installed and latest version Adding package expect from group planetlab Package expect-5.44.1.15-2.fc14.x86_64 already installed and latest version Adding package cronie-anacron from group planetlab Package cronie-anacron-1.4.8-2.fc14.x86_64 already installed and latest version Adding package tar from group planetlab Package 2:tar-1.23-9.fc14.x86_64 already installed and latest version Adding package pyplnet from group planetlab Package pyplnet-4.3-18.onelab.noarch already installed and latest version Adding package sudo from group planetlab Package sudo-1.7.4p5-2.fc14.x86_64 already installed and latest version Adding package logrotate from group planetlab Package logrotate-3.7.9-4.fc14.x86_64 already installed and latest version Adding package at from group planetlab Package at-3.1.12-6.fc14.x86_64 already installed and latest version Adding package file from group planetlab Package file-5.04-17.fc14.x86_64 already installed and latest version Adding package traceroute from group planetlab Package 3:traceroute-2.0.18-1.fc14.x86_64 already installed and latest version Adding package curl from group planetlab Package curl-7.21.0-10.fc14.x86_64 already installed and latest version Adding package crontabs from group planetlab Package crontabs-1.11-1.20101115git.fc14.noarch already installed and latest version Adding package bzip2 from group planetlab Package bzip2-1.0.6-1.fc14.1.x86_64 already installed and latest version Adding package nc from group planetlab Package nc-1.100-2.fc14.x86_64 already installed and latest version Adding package util-vserver-pl from group planetlab Package util-vserver-pl-0.4-29.onelab.x86_64 already installed and latest version Adding package coreutils from group planetlab Package coreutils-8.5-7.fc14.x86_64 already installed and latest version Adding package wireless-tools from group planetlab Package 1:wireless-tools-29-5.1.fc12.x86_64 already installed and latest version Adding package util-vserver-lib from group planetlab Package util-vserver-lib-0.30.216-21.x86_64 already installed and latest version Adding package passwd from group planetlab Package passwd-0.78-1.fc14.x86_64 already installed and latest version Adding package time from group planetlab Package time-1.7-38.fc14.x86_64 already installed and latest version Adding package quota from group planetlab Package 1:quota-3.17-18.fc14.x86_64 already installed and latest version Adding package telnet from group planetlab Package 1:telnet-0.17-51.fc14.x86_64 already installed and latest version Adding package readline from group planetlab Package readline-6.1-2.fc14.x86_64 already installed and latest version Adding package cronie from group planetlab Package cronie-1.4.8-2.fc14.x86_64 already installed and latest version Adding package nano from group planetlab Package nano-2.2.4-1.fc14.x86_64 already installed and latest version Adding package filesystem from group planetlab Package filesystem-2.4.35-1.fc14.x86_64 already installed and latest version Adding package diffutils from group planetlab Package diffutils-2.8.1-29.fc14.x86_64 already installed and latest version Adding package e2fsprogs from group planetlab Package e2fsprogs-1.41.12-6.fc14.x86_64 already installed and latest version Adding package monitor-runlevelagent from group planetlab Package monitor-runlevelagent-3.1-6.onelab.x86_64 already installed and latest version Adding package pciutils from group planetlab Package pciutils-3.1.7-3.fc14.x86_64 already installed and latest version Adding package gzip from group planetlab Package gzip-1.4-1.fc14.x86_64 already installed and latest version Adding package nodemanager-vs from group planetlab Package nodemanager-vs-5.2-18.onelab.x86_64 already installed and latest version Adding package pl_mom from group planetlab Package pl_mom-2.3-5.onelab.x86_64 already installed and latest version No packages in any requested group available to install or update Config time: 0.004 Yum Version: 3.2.28 Setting up Package Sacks pkgsack time: 0.048 rpmdb time: 0.000 Setting up Update Process Updating Everything Building updates object up:Obs Init time: 0.277 up:simple updates time: 0.133 up:obs time: 0.031 up:condense time: 0.000 updates time: 1.175 No Packages marked for Update ***** 2016-01-18 11:11:58 Turning on messages ***** 2016-01-18 11:11:58 Checking existence of proxy config file... ***** 2016-01-18 11:11:58 Not using any proxy. ***** 2016-01-18 11:11:58 Rebuilding RPM Database. ***** 2016-01-18 11:11:59 Looking for RPMs to be deleted. ***** 2016-01-18 11:11:59 No RPMs listed in file to delete. ***** 2016-01-18 11:11:59 Removing any existing GPG signing keys from the RPM database ***** 2016-01-18 11:11:59 Installing all GPG signing keys in /etc/pki/rpm-gpg ***** 2016-01-18 11:11:59 Removing any existing reboot flags ***** 2016-01-18 11:11:59 Ignoring any reboot flags set by RPMs ***** 2016-01-18 11:11:59 Checking if /usr/bin/yum supports --verbose ***** 2016-01-18 11:11:59 It does, using --verbose option ***** 2016-01-18 11:11:59 Checking if /usr/bin/yum supports SSL certificate checks ***** 2016-01-18 11:12:00 Unsupported, not using --sslcertdir option ***** 2016-01-18 11:12:00 Invoking /usr/bin/yum clean all ***** 2016-01-18 11:12:00 List of crucial packages: ['NodeUpdate', 'nodemanager-lib', 'nodemanager-lxc', 'nodemanager-vs'] ***** 2016-01-18 11:12:00 Invoking /usr/bin/yum --verbose -y update NodeUpdate ***** 2016-01-18 11:12:22 Invoking /usr/bin/yum --verbose -y update nodemanager-lib ***** 2016-01-18 11:12:24 Invoking /usr/bin/yum --verbose -y install nodemanager-lxc ***** 2016-01-18 11:12:24 Invoking /usr/bin/yum --verbose -y update nodemanager-vs ***** 2016-01-18 11:12:26 Updating PlanetLab group ***** 2016-01-18 11:12:26 Invoking /usr/bin/yum --verbose -y groupinstall PlanetLab ***** 2016-01-18 11:12:28 Updating rest of system ***** 2016-01-18 11:12:28 Invoking /usr/bin/yum --verbose -y update ***** 2016-01-18 11:12:30 Checking for extra groups (extensions) to update ***** 2016-01-18 11:12:30 No extra groups found in file. ***** 2016-01-18 11:12:30 Update complete. 11:12:30(UTC) ==========stderr error: /etc/pki/rpm-gpg/RPM-GPG-KEY-fedora-14-primary: import failed. error: /etc/pki/rpm-gpg/RPM-GPG-KEY-fedora-i386: import failed. error: /etc/pki/rpm-gpg/RPM-GPG-KEY-fedora-sparc: import read failed(-1). error: /etc/pki/rpm-gpg/RPM-GPG-KEY-fedora-sparc64: import read failed(-1). error: /etc/pki/rpm-gpg/RPM-GPG-KEY-fedora-x86_64: import failed. Error: Nothing to do 11:12:30(UTC) Step: Rebuilding initrd sysexec >>> mount -t devtmpfs none /dev sysexec >>> mount -o bind /dev /tmp/mnt/sysimg/dev sysexec >>> mount -t sysfs none /tmp/mnt/sysimg/sys 11:12:30(UTC) /tmp/mnt/sysimg/boot/initrd-2.6.32-36.onelab.x86_64.img is already removed 11:12:30(UTC) sysexec >>> chroot /tmp/mnt/sysimg mkinitrd -v --with=ext3 --allow-missing /boot/initrd-2.6.32-36.onelab.x86_64.img 2.6.32-36.onelab.x86_64 sysexec >>> chroot /tmp/mnt/sysimg mkinitrd -v --with=ext3 --allow-missing /boot/initrd-2.6.32-36.onelab.x86_64.img 2.6.32-36.onelab.x86_64 11:12:35(UTC) ==========stdout 4 /tmp/initramfs.fkKLtx/dev/pts 4 /tmp/initramfs.fkKLtx/initqueue 4 /tmp/initramfs.fkKLtx/initqueue-finished 4 /tmp/initramfs.fkKLtx/initqueue-settled 4 /tmp/initramfs.fkKLtx/lib/udev/rules.d 4 /tmp/initramfs.fkKLtx/proc 4 /tmp/initramfs.fkKLtx/sys 4 /tmp/initramfs.fkKLtx/sysroot 4 /tmp/initramfs.fkKLtx/tmp 4 /tmp/initramfs.fkKLtx/usr/lib 4 /tmp/initramfs.fkKLtx/var/run 8 /tmp/initramfs.fkKLtx/dev 8 /tmp/initramfs.fkKLtx/emergency 8 /tmp/initramfs.fkKLtx/etc/ld.so.conf.d 8 /tmp/initramfs.fkKLtx/etc/plymouth 8 /tmp/initramfs.fkKLtx/lib/terminfo/a 8 /tmp/initramfs.fkKLtx/lib/terminfo/d 8 /tmp/initramfs.fkKLtx/lib/terminfo/l 8 /tmp/initramfs.fkKLtx/pre-pivot 8 /tmp/initramfs.fkKLtx/pre-trigger 8 /tmp/initramfs.fkKLtx/usr/share/plymouth/themes/details 8 /tmp/initramfs.fkKLtx/usr/share/plymouth/themes/text 8 /tmp/initramfs.fkKLtx/var 12 /tmp/initramfs.fkKLtx/mount 16 /tmp/initramfs.fkKLtx/pre-udev 20 /tmp/initramfs.fkKLtx/lib/modules/2.6.32-36.onelab.x86_64/kernel/lib 20 /tmp/initramfs.fkKLtx/usr/share/pixmaps 20 /tmp/initramfs.fkKLtx/usr/share/plymouth/themes 24 /tmp/initramfs.fkKLtx/etc/modprobe.d 28 /tmp/initramfs.fkKLtx/etc/lvm 28 /tmp/initramfs.fkKLtx/lib64/device-mapper 28 /tmp/initramfs.fkKLtx/usr/share/plymouth 32 /tmp/initramfs.fkKLtx/lib/terminfo/v 32 /tmp/initramfs.fkKLtx/usr/sbin 36 /tmp/initramfs.fkKLtx/cmdline 48 /tmp/initramfs.fkKLtx/lib/modules/2.6.32-36.onelab.x86_64/kernel/drivers/scsi/device_handler 52 /tmp/initramfs.fkKLtx/usr/share 60 /tmp/initramfs.fkKLtx/lib/terminfo 72 /tmp/initramfs.fkKLtx/etc/udev/rules.d 72 /tmp/initramfs.fkKLtx/lib/modules/2.6.32-36.onelab.x86_64/kernel/drivers/mmc/host 72 /tmp/initramfs.fkKLtx/usr/lib64/plymouth/renderers 80 /tmp/initramfs.fkKLtx/etc/udev 80 /tmp/initramfs.fkKLtx/lib/modules/2.6.32-36.onelab.x86_64/kernel/drivers/ata 80 /tmp/initramfs.fkKLtx/lib/modules/2.6.32-36.onelab.x86_64/kernel/drivers/cdrom 104 /tmp/initramfs.fkKLtx/usr/lib64/plymouth 116 /tmp/initramfs.fkKLtx/lib/modules/2.6.32-36.onelab.x86_64/kernel/fs/jbd 132 /tmp/initramfs.fkKLtx/lib/modules/2.6.32-36.onelab.x86_64/kernel/drivers/block 136 /tmp/initramfs.fkKLtx/lib/modules/2.6.32-36.onelab.x86_64/kernel/drivers/usb/storage 140 /tmp/initramfs.fkKLtx/lib/modules/2.6.32-36.onelab.x86_64/kernel/drivers/usb 144 /tmp/initramfs.fkKLtx/lib/modules/2.6.32-36.onelab.x86_64/kernel/drivers/mmc/core 152 /tmp/initramfs.fkKLtx/lib/modules/2.6.32-36.onelab.x86_64/kernel/drivers/firewire 160 /tmp/initramfs.fkKLtx/lib/modules/2.6.32-36.onelab.x86_64/kernel/drivers/md 172 /tmp/initramfs.fkKLtx/etc 172 /tmp/initramfs.fkKLtx/lib/modules/2.6.32-36.onelab.x86_64/kernel/drivers/scsi 196 /tmp/initramfs.fkKLtx/usr/bin 220 /tmp/initramfs.fkKLtx/lib/modules/2.6.32-36.onelab.x86_64/kernel/drivers/mmc 252 /tmp/initramfs.fkKLtx/lib/modules/2.6.32-36.onelab.x86_64/kernel/fs/ext3 292 /tmp/initramfs.fkKLtx/usr/lib64 340 /tmp/initramfs.fkKLtx/lib/udev 392 /tmp/initramfs.fkKLtx/lib/modules/2.6.32-36.onelab.x86_64/kernel/fs 580 /tmp/initramfs.fkKLtx/usr 1140 /tmp/initramfs.fkKLtx/lib/modules/2.6.32-36.onelab.x86_64/kernel/drivers 1280 /tmp/initramfs.fkKLtx/bin 1376 /tmp/initramfs.fkKLtx/sbin 1556 /tmp/initramfs.fkKLtx/lib/modules/2.6.32-36.onelab.x86_64/kernel 1744 /tmp/initramfs.fkKLtx/lib/modules/2.6.32-36.onelab.x86_64 1748 /tmp/initramfs.fkKLtx/lib/modules 2160 /tmp/initramfs.fkKLtx/lib 6548 /tmp/initramfs.fkKLtx/lib64 12264 /tmp/initramfs.fkKLtx 12264 total -rw-r--r-- 1 root root 4.6M Jan 18 11:12 /boot/initrd-2.6.32-36.onelab.x86_64.img 11:12:35(UTC) ==========stderr I: Installing /lib64/libgcc_s-4.5.1-20100924.so.1 I: Installing /lib64/libc-2.13.so I: Installing /lib64/ld-2.13.so I: Installing /bin/dash I: Installing /lib64/libglib-2.0.so.0.2600.0 I: Installing /lib/udev/console_init I: Installing /bin/setfont I: Installing /bin/loadkeys I: Installing /lib/udev/rules.d/10-console.rules I: Installing /usr/share/dracut/modules.d/10redhat-i18n/parse-i18n.sh I: Installing /usr/share/dracut/modules.d/10rpmversion/dracut-version I: Installing /usr/share/dracut/modules.d/10rpmversion/version.sh I: Installing /lib64/libply.so.2.0.0 I: Installing /lib64/libply-splash-core.so.2.0.0 I: Installing /lib64/libm-2.13.so I: Installing /lib64/librt-2.13.so I: Installing /lib64/libdl-2.13.so I: Installing /lib64/libpthread-2.13.so I: Installing /sbin/plymouthd I: Installing /bin/plymouth I: Installing /usr/share/plymouth/themes/text/text.plymouth I: Installing /usr/lib64/plymouth//text.so I: Installing /usr/share/plymouth/themes/details/details.plymouth I: Installing /usr/lib64/plymouth//details.so I: Installing /usr/share/pixmaps/system-logo-white.png I: Installing /etc/fedora-release I: Installing /usr/share/plymouth//plymouthd.defaults I: Installing /etc/plymouth//plymouthd.conf I: Installing /usr/lib64/libdrm_intel.so.1.0.0 I: Installing /usr/lib64/libdrm.so.2.4.0 I: Installing /usr/lib64/libdrm_radeon.so.1.0.0 I: Installing /usr/lib64/libdrm_nouveau.so.1.0.0 I: Installing /usr/lib64/libkms.so.1.0.0 I: Installing /usr/lib64/plymouth//renderers/drm.so I: Installing /usr/lib64/plymouth//renderers/frame-buffer.so I: Installing /usr/share/dracut/modules.d/50plymouth/plymouth-newroot.sh I: Installing /usr/share/dracut/modules.d/50plymouth/plymouth-pretrigger.sh I: Installing /usr/share/dracut/modules.d/50plymouth/plymouth-emergency.sh I: Installing /usr/share/dracut/modules.d/50plymouth/cryptroot-ask.sh I: Installing /bin/readlink I: Installing /usr/share/dracut/modules.d/90dm/dm-pre-udev.sh I: Installing /lib64/libdevmapper.so.1.02 I: Installing /lib64/libudev.so.0.9.1 I: Installing /lib64/libselinux.so.1 I: Installing /lib64/libsepol.so.1 I: Installing /sbin/dmsetup I: Installing /lib64/libdevmapper-event.so.1.02 I: Installing /sbin/dmeventd I: Installing /lib/udev/rules.d/10-dm.rules I: Installing /lib/udev/rules.d/95-dm-notify.rules I: Installing /lib/modules/2.6.32-36.onelab.x86_64/kernel/drivers/md/dm-mod.ko I: Installing /etc/modprobe.conf I: Installing /etc/modprobe.d/dist-alsa.conf I: Installing /etc/modprobe.d/dist.conf I: Installing /etc/modprobe.d/dist-oss.conf I: Installing /etc/modprobe.d/blacklist.conf I: Installing /usr/share/dracut/modules.d/90kernel-modules/parse-kernel.sh I: Installing /lib/modules/2.6.32-36.onelab.x86_64/kernel/drivers/cdrom/cdrom.ko I: Installing /lib/modules/2.6.32-36.onelab.x86_64/kernel/drivers/scsi/sr_mod.ko I: Installing /lib/modules/2.6.32-36.onelab.x86_64/kernel/lib/crc-t10dif.ko I: Installing /lib/modules/2.6.32-36.onelab.x86_64/kernel/drivers/scsi/sd_mod.ko I: Installing /lib/modules/2.6.32-36.onelab.x86_64/kernel/drivers/scsi/device_handler/scsi_dh_rdac.ko I: Installing /lib/modules/2.6.32-36.onelab.x86_64/kernel/drivers/scsi/device_handler/scsi_dh_emc.ko I: Installing /lib/modules/2.6.32-36.onelab.x86_64/kernel/lib/crc-itu-t.ko I: Installing /lib/modules/2.6.32-36.onelab.x86_64/kernel/drivers/firewire/firewire-core.ko I: Installing /lib/modules/2.6.32-36.onelab.x86_64/kernel/drivers/firewire/firewire-ohci.ko I: Installing /lib/modules/2.6.32-36.onelab.x86_64/kernel/drivers/usb/storage/usb-storage.ko I: Installing /lib/modules/2.6.32-36.onelab.x86_64/kernel/drivers/mmc/core/mmc_core.ko I: Installing /lib/modules/2.6.32-36.onelab.x86_64/kernel/drivers/mmc/host/sdhci.ko I: Installing /lib/modules/2.6.32-36.onelab.x86_64/kernel/drivers/mmc/host/sdhci-pci.ko I: Installing /lib/modules/2.6.32-36.onelab.x86_64/kernel/drivers/block/floppy.ko I: Installing /lib/modules/2.6.32-36.onelab.x86_64/kernel/drivers/ata/ata_generic.ko I: Installing /lib/modules/2.6.32-36.onelab.x86_64/kernel/drivers/ata/pata_acpi.ko I: Installing /lib/modules/2.6.32-36.onelab.x86_64/kernel/drivers/ata/ata_piix.ko device node not found I: Installing /lib/modules/2.6.32-36.onelab.x86_64/kernel/fs/mbcache.ko I: Installing /lib/modules/2.6.32-36.onelab.x86_64/kernel/fs/jbd/jbd.ko I: Installing /lib/modules/2.6.32-36.onelab.x86_64/kernel/fs/ext3/ext3.ko I: Installing /lib/modules/2.6.32-36.onelab.x86_64/kernel/drivers/scsi/scsi_wait_scan.ko I: Installing /lib64/libreadline.so.6.1 I: Installing /lib64/libtinfo.so.5.7 I: Installing /sbin/lvm I: Installing /usr/share/dracut/modules.d/90lvm/64-lvm.rules I: Installing /etc/lvm/lvm.conf I: Installing /lib/udev/rules.d/13-dm-disk.rules I: Installing /lib/udev/rules.d/11-dm-lvm.rules I: Installing /usr/share/dracut/modules.d/90lvm/lvm_scan.sh I: Installing /usr/share/dracut/modules.d/90lvm/parse-lvm.sh cat: write error: Broken pipe I: Installing /lib64/libdevmapper-event-lvm2.so.2.02 I: Installing /lib64/liblvm2cmd.so.2.02 I: Installing /lib64/device-mapper/libdevmapper-event-lvm2mirror.so I: Installing /lib64/device-mapper/libdevmapper-event-lvm2snapshot.so I: Installing /usr/share/dracut/modules.d/95resume/parse-resume.sh I: Installing /usr/share/dracut/modules.d/95resume/resume-genrules.sh I: Installing /usr/share/dracut/modules.d/95resume/resume.sh I: Installing /lib64/libblkid.so.1.1.0 I: Installing /lib64/libuuid.so.1.3.0 I: Installing /bin/umount I: Installing /usr/share/dracut/modules.d/95rootfs-block/parse-block.sh I: Installing /usr/share/dracut/modules.d/95rootfs-block/block-genrules.sh I: Installing /usr/share/dracut/modules.d/95rootfs-block/mount-root.sh I: Installing /lib/terminfo/a/ansi I: Installing /lib/terminfo/l/linux I: Installing /lib/terminfo/d/dumb I: Installing /lib/terminfo/v/vt200 I: Installing /lib/terminfo/v/vt52 I: Installing /lib/terminfo/v/vt100-am I: Installing /lib/terminfo/v/vt100 I: Installing /lib/terminfo/v/vt100-nav I: Installing /lib/terminfo/v/vt102 I: Installing /lib/terminfo/v/vt220 I: Installing /sbin/udevd I: Installing /sbin/udevadm I: Installing /etc/udev/udev.conf I: Installing /etc/group I: Installing /bin/basename I: Installing /lib/udev/rules.d/50-udev-default.rules I: Installing /lib/udev/rules.d/60-persistent-storage.rules I: Installing /lib/udev/rules.d/61-persistent-storage-edd.rules I: Installing /lib/udev/rules.d/80-drivers.rules I: Installing /lib/udev/rules.d/95-udev-late.rules I: Installing /usr/share/dracut/modules.d/95udev-rules/01-ignore.rules I: Installing /lib/udev/rules.d/50-firmware.rules I: Installing /bin/cat I: Installing /bin/uname I: Installing /sbin/blkid I: Installing /usr/share/dracut/modules.d/95udev-rules/59-persistent-storage.rules I: Installing /usr/share/dracut/modules.d/95udev-rules/61-persistent-storage.rules I: Installing /lib/udev/ata_id I: Installing /lib/udev/cdrom_id I: Installing /lib/udev/create_floppy_devices I: Installing /lib/udev/edd_id I: Installing /lib/udev/firmware I: Installing /usr/lib64/libusb-0.1.so.4.4.4 I: Installing /lib/udev/hid2hci I: Installing /lib/udev/path_id I: Installing /lib/udev/scsi_id I: Installing /lib/udev/usb_id cat: write error: Broken pipe I: Installing /lib64/libnss_files-2.13.so I: Installing /bin/mount I: Installing /bin/mknod I: Installing /bin/mkdir I: Installing /sbin/modprobe I: Installing /sbin/killall5 I: Installing /bin/sleep I: Installing /usr/sbin/chroot I: Installing /bin/sed I: Installing /lib64/libcap.so.2.22 I: Installing /lib64/libacl.so.1.1.0 I: Installing /lib64/libattr.so.1.1.0 I: Installing /bin/ls I: Installing /usr/bin/flock I: Installing /bin/cp I: Installing /bin/mv I: Installing /bin/dmesg I: Installing /bin/rm I: Installing /bin/ln I: Installing /sbin/rmmod I: Installing /usr/bin/mkfifo I: Installing /lib64/libpcre.so.0.0.1 I: Installing /usr/bin/less I: Installing /usr/share/dracut/modules.d/99base/init I: Installing /usr/share/dracut/modules.d/99base/initqueue I: Installing /usr/share/dracut/modules.d/99base/loginit I: Installing /sbin/switch_root I: Installing /usr/share/dracut/modules.d/99base/dracut-lib.sh I: Installing /usr/share/dracut/modules.d/99base/parse-root-opts.sh I: Installing /usr/share/dracut/modules.d/99base/parse-blacklist.sh I: ldconfig might need uid=0 (root) for chroot() 11:12:35(UTC) sysexec >>> umount /tmp/mnt/sysimg/sys sysexec >>> umount /tmp/mnt/sysimg/sys 11:12:35(UTC) sysexec >>> umount /tmp/mnt/sysimg/dev sysexec >>> umount /tmp/mnt/sysimg/dev 11:12:35(UTC) Step: Updating node configuration. 11:12:35(UTC) Updating vserver's /etc/hosts and /etc/resolv.conf files 11:12:35(UTC) Updating network configuration in: 11:12:35(UTC) /tmp/mnt/sysimg//vservers/.vstub 11:12:35(UTC) /tmp/mnt/sysimg//vservers/.vref 11:12:35(UTC) /tmp/mnt/sysimg//vservers/.hash 11:12:35(UTC) /tmp/mnt/sysimg//vservers/.pkg 11:12:35(UTC) /tmp/mnt/sysimg//vservers/.vref/onelab-f14-x86_64 11:12:35(UTC) Forcing update on vserver reference directory: /tmp/mnt/sysimg//vservers/.vref/onelab-f14-x86_64 11:12:35(UTC) sysexec (shell mode) >>> echo 'AUTO_UPDATE_NET_FILES' > /tmp/mnt/sysimg//vservers/.vref/onelab-f14-x86_64/etc/AUTO_UPDATE_NET_FILESsysexec (shell mode) >>> echo 'AUTO_UPDATE_NET_FILES' > /tmp/mnt/sysimg//vservers/.vref/onelab-f14-x86_64/etc/AUTO_UPDATE_NET_FILES 11:12:35(UTC) Updating network files in /tmp/mnt/sysimg//vservers/.vref/onelab-f14-x86_64. 11:12:35(UTC) sysexec >>> chattr -i /tmp/mnt/sysimg//vservers/.vref/onelab-f14-x86_64/etc/hosts sysexec >>> chattr -i /tmp/mnt/sysimg//vservers/.vref/onelab-f14-x86_64/etc/hosts 11:12:35(UTC) sysexec >>> chattr -i /tmp/mnt/sysimg//vservers/.vref/onelab-f14-x86_64/etc/resolv.conf sysexec >>> chattr -i /tmp/mnt/sysimg//vservers/.vref/onelab-f14-x86_64/etc/resolv.conf 11:12:35(UTC) ==========stderr chattr: No such file or directory while trying to stat /tmp/mnt/sysimg//vservers/.vref/onelab-f14-x86_64/etc/resolv.conf 11:12:35(UTC) sysexec >>> cp /tmp/mnt/sysimg/etc/resolv.conf /tmp/mnt/sysimg//vservers/.vref/onelab-f14-x86_64/etc sysexec >>> cp /tmp/mnt/sysimg/etc/resolv.conf /tmp/mnt/sysimg//vservers/.vref/onelab-f14-x86_64/etc 11:12:35(UTC) Updating ssh public host key with PLC. 11:12:35(UTC) Copying kernel and initrd for booting. 11:12:35(UTC) sysexec >>> cp /tmp/mnt/sysimg/boot/kernel-boot /tmp/kernel sysexec >>> cp /tmp/mnt/sysimg/boot/kernel-boot /tmp/kernel 11:12:35(UTC) sysexec >>> cp /tmp/mnt/sysimg/boot/initrd-boot /tmp/initrd sysexec >>> cp /tmp/mnt/sysimg/boot/initrd-boot /tmp/initrd 11:12:35(UTC) Unmounting disks. 11:12:35(UTC) sysexec >>> umount /tmp/mnt/sysimg/vservers sysexec >>> umount /tmp/mnt/sysimg/vservers 11:12:35(UTC) sysexec >>> umount /tmp/mnt/sysimg/proc sysexec >>> umount /tmp/mnt/sysimg/proc 11:12:35(UTC) sysexec >>> umount /tmp/mnt/sysimg/dev sysexec >>> umount /tmp/mnt/sysimg/dev 11:12:35(UTC) ==========stderr umount: /tmp/mnt/sysimg/dev: not mounted 11:12:35(UTC) sysexec >>> umount /tmp/mnt/sysimg/sys sysexec >>> umount /tmp/mnt/sysimg/sys 11:12:35(UTC) ==========stderr umount: /tmp/mnt/sysimg/sys: not mounted 11:12:35(UTC) sysexec >>> umount /tmp/mnt/sysimg sysexec >>> umount /tmp/mnt/sysimg 11:12:35(UTC) sysexec >>> vgchange -an sysexec >>> vgchange -an 11:12:35(UTC) ==========stdout 0 logical volume(s) in volume group "planetlab" now active 11:12:35(UTC) ==========stderr File descriptor 3 (/tmp/bm.log) leaked on vgchange invocation. Parent PID 631: /usr/bin/python 11:12:35(UTC) Step: Stopping RunlevelAgent.py 11:12:35(UTC) Unloading modules and chain booting to new kernel. 11:12:35(UTC) Uploading logs to /boot/upload-bmlog.php 11:12:35(UTC) sysexec >>> bash --login -c "upload_logs /root/.bash_eternal_history" sysexec >>> bash --login -c "upload_logs /root/.bash_eternal_history" 11:12:35(UTC) ==========stderr bash: upload_logs: command not found 11:12:35(UTC) sysexec >>> touch /tmp/CANCEL_BOOT sysexec >>> touch /tmp/CANCEL_BOOT 11:12:35(UTC) sysexec >>> ifconfig eth0 down sysexec >>> ifconfig eth0 down 11:12:35(UTC) sysexec >>> killall dhclient sysexec >>> killall dhclient 11:12:35(UTC) ==========stderr dhclient: no process found 11:12:35(UTC) sysexec >>> umount -a -r -t ext2,ext3 sysexec >>> umount -a -r -t ext2,ext3 11:12:35(UTC) ==========stderr umount: /: device is busy. (In some cases useful info about processes that use the device is found by lsof(8) or fuser(1)) 11:12:35(UTC) sysexec >>> modprobe -r lvm-mod sysexec >>> modprobe -r lvm-mod 11:12:35(UTC) ==========stderr WARNING: Deprecated config file /etc/modprobe.conf, all config files belong into /etc/modprobe.d/. FATAL: Module lvm_mod not found. 11:12:35(UTC) Unloading ata_piix 11:12:35(UTC) sysexec >>> modprobe -r ata_piix sysexec >>> modprobe -r ata_piix ata1.00: disabled sd 0:0:0:0: [sda] Synchronizing SCSI cache sd 0:0:0:0: [sda] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK sd 0:0:0:0: [sda] Stopping disk sd 0:0:0:0: [sda] START_STOP FAILED sd 0:0:0:0: [sda] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK ata2.00: disabled 11:12:35(UTC) ==========stderr WARNING: Deprecated config file /etc/modprobe.conf, all config files belong into /etc/modprobe.d/. 11:12:35(UTC) Unloading pata_acpi 11:12:35(UTC) sysexec >>> modprobe -r pata_acpi sysexec >>> modprobe -r pata_acpi 11:12:35(UTC) ==========stderr WARNING: Deprecated config file /etc/modprobe.conf, all config files belong into /etc/modprobe.d/. 11:12:35(UTC) Unloading i2c-piix4 11:12:35(UTC) sysexec >>> modprobe -r i2c-piix4 sysexec >>> modprobe -r i2c-piix4 11:12:35(UTC) ==========stderr WARNING: Deprecated config file /etc/modprobe.conf, all config files belong into /etc/modprobe.d/. 11:12:35(UTC) Unloading e1000 11:12:35(UTC) sysexec >>> modprobe -r e1000 sysexec >>> modprobe -r e1000 e1000 0000:00:03.0: PCI INT A disabled 11:12:36(UTC) ==========stderr WARNING: Deprecated config file /etc/modprobe.conf, all config files belong into /etc/modprobe.d/. 11:12:36(UTC) Unloading e1000 driver; sleeping 4 seconds... 11:12:40(UTC) Unloading sd_mod 11:12:40(UTC) sysexec >>> modprobe -r sd_mod sysexec >>> modprobe -r sd_mod 11:12:40(UTC) ==========stderr WARNING: Deprecated config file /etc/modprobe.conf, all config files belong into /etc/modprobe.d/. 11:12:40(UTC) Unloading usb_storage 11:12:40(UTC) sysexec >>> modprobe -r usb_storage sysexec >>> modprobe -r usb_storage usbcore: deregistering interface driver usb-storage udevd[53]: failed to create queue file: No such file or directory 11:12:40(UTC) ==========stderr WARNING: Deprecated config file /etc/modprobe.conf, all config files belong into /etc/modprobe.d/. 11:12:40(UTC) Skipping unload of kernel module 'floppy'. 11:12:40(UTC) Parsed in "hcheck_reboot0 systemd.log_level=debug console=ttyS0,115200n8 biosdevname=0 selinux=0" kexec args from /kargs.txt 11:12:40(UTC) sysexec >>> hwclock --systohc --utc sysexec >>> hwclock --systohc --utc 11:12:41(UTC) sysexec >>> kexec --force --initrd=/tmp/initrd --append="root=/dev/mapper/planetlab-root ramdisk_size=8192 hcheck_reboot0 systemd.log_level=debug console=ttyS0,115200n8 biosdevname=0 selinux=0" /tmp/kernel sysexec >>> kexec --force --initrd=/tmp/initrd --append="root=/dev/mapper/planetlab-root ramdisk_size=8192 hcheck_reboot0 systemd.log_level=debug console=ttyS0,115200n8 biosdevname=0 selinux=0" /tmp/kernel md: stopping all md devices. Starting new kernel Initializing cgroup subsys cpuset Initializing cgroup subsys cpu Linux version 2.6.32-36.onelab.x86_64 (support@planet-lab.org) (gcc version 4.5.1 20100924 (Red Hat 4.5.1-4) (GCC) ) #1 SMP Mon Jan 18 10:49:25 CET 2016 Command line: root=/dev/mapper/planetlab-root ramdisk_size=8192 hcheck_reboot0 systemd.log_level=debug console=ttyS0,115200n8 biosdevname=0 selinux=0 KERNEL supported cpus: Intel GenuineIntel AMD AuthenticAMD Centaur CentaurHauls BIOS-provided physical RAM map: BIOS-e820: 0000000000000100 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000007ffe0000 (usable) BIOS-e820: 000000007ffe0000 - 0000000080000000 (reserved) BIOS-e820: 00000000feffc000 - 00000000ff000000 (reserved) BIOS-e820: 00000000fffc0000 - 0000000100000000 (reserved) DMI 2.8 present. SMBIOS version 2.8 @ 0xF6330 last_pfn = 0x7ffe0 max_arch_pfn = 0x400000000 PAT not supported by CPU. x2apic enabled by BIOS, switching to x2apic ops init_memory_mapping: 0000000000000000-000000007ffe0000 RAMDISK: 7fb45000 - 7ffd4f9f ACPI: RSDP 00000000000f6300 00014 (v00 BOCHS ) ACPI: RSDT 000000007ffe16ee 00034 (v01 BOCHS BXPCRSDT 00000001 BXPC 00000001) ACPI: FACP 000000007ffe0c14 00074 (v01 BOCHS BXPCFACP 00000001 BXPC 00000001) ACPI: DSDT 000000007ffe0040 00BD4 (v01 BOCHS BXPCDSDT 00000001 BXPC 00000001) ACPI: FACS 000000007ffe0000 00040 ACPI: SSDT 000000007ffe0c88 009B6 (v01 BOCHS BXPCSSDT 00000001 BXPC 00000001) ACPI: APIC 000000007ffe163e 00078 (v01 BOCHS BXPCAPIC 00000001 BXPC 00000001) ACPI: HPET 000000007ffe16b6 00038 (v01 BOCHS BXPCHPET 00000001 BXPC 00000001) Setting APIC routing to cluster x2apic. No NUMA configuration found Faking a node at 0000000000000000-000000007ffe0000 Bootmem setup node 0 0000000000000000-000000007ffe0000 NODE_DATA [000000000000a000 - 000000000003dfff] bootmap [000000000003e000 - 000000000004dfff] pages 10 (7 early reservations) ==> bootmem [0000000000 - 007ffe0000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000] #2 [0001000000 - 0001f4fdc4] TEXT DATA BSS ==> [0001000000 - 0001f4fdc4] #3 [007fb45000 - 007ffd4f9f] RAMDISK ==> [007fb45000 - 007ffd4f9f] #4 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000] #5 [0001f50000 - 0001f50095] BRK ==> [0001f50000 - 0001f50095] #6 [0000008000 - 000000a000] PGTABLE ==> [0000008000 - 000000a000] found SMP MP-table at [ffff8800000f64e0] f64e0 kvm-clock: Using msrs 4b564d01 and 4b564d00 kvm-clock: cpu 0, msr 0:1bc10c1, boot clock Zone PFN ranges: DMA 0x00000001 -> 0x00001000 DMA32 0x00001000 -> 0x00100000 Normal 0x00100000 -> 0x00100000 Movable zone start PFN for each node early_node_map[2] active PFN ranges 0: 0x00000001 -> 0x0000009f 0: 0x00000100 -> 0x0007ffe0 ACPI: PM-Timer IO Port: 0x608 Setting APIC routing to cluster x2apic. ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1]) ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 0, version 17, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level) ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level) Using ACPI (MADT) for SMP configuration information ACPI: HPET id: 0x8086a201 base: 0xfed00000 SMP: Allowing 1 CPUs, 0 hotplug CPUs PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000 PM: Registered nosave memory: 00000000000f0000 - 0000000000100000 Allocating PCI resources starting at 80000000 (gap: 80000000:7effc000) Booting paravirtualized kernel on KVM NR_CPUS:4096 nr_cpumask_bits:1 nr_cpu_ids:1 nr_node_ids:1 PERCPU: Embedded 30 pages/cpu @ffff880002000000 s93016 r8192 d21672 u2097152 pcpu-alloc: s93016 r8192 d21672 u2097152 alloc=1*2097152 pcpu-alloc: [0] 0 kvm-clock: cpu 0, msr 0:20160c1, primary cpu clock Built 1 zonelists in Node order, mobility grouping on. Total pages: 516889 Policy zone: DMA32 Kernel command line: root=/dev/mapper/planetlab-root ramdisk_size=8192 hcheck_reboot0 systemd.log_level=debug console=ttyS0,115200n8 biosdevname=0 selinux=0 PID hash table entries: 4096 (order: 3, 32768 bytes) Checking aperture... No AGP bridge found AMD-Vi disabled by default: pass amd_iommu=on to enable Memory: 2046980k/2097024k available (5343k kernel code, 392k absent, 49652k reserved, 6597k data, 1232k init) Hierarchical RCU implementation. NR_IRQS:33024 nr_irqs:256 Console: colour VGA+ 80x25 console [ttyS0] enabled allocated 20971520 bytes of page_cgroup please try 'cgroup_disable=memory' option if you don't want memory cgroups HPET: 3 timers in total, 0 timers will be used for per-cpu timer Detected 2599.996 MHz processor. Calibrating delay loop (skipped) preset value.. 5199.99 BogoMIPS (lpj=2599996) pid_max: default: 32768 minimum: 301 Security Framework initialized SELinux: Disabled at boot. Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes) Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes) Mount-cache hash table entries: 256 Initializing cgroup subsys ns Initializing cgroup subsys cpuacct Initializing cgroup subsys memory Initializing cgroup subsys devices Initializing cgroup subsys freezer Initializing cgroup subsys net_cls Initializing cgroup subsys blkio mce: CPU supports 10 MCE banks alternatives: switching to unfair spinlock SMP alternatives: switching to UP code Freeing SMP alternatives: 38k freed ACPI: Core revision 20090903 ftrace: converting mcount calls to 0f 1f 44 00 00 ftrace: allocating 21994 entries in 87 pages Setting APIC routing to physical x2apic ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 CPU0: Intel QEMU Virtual CPU version 2.4.1 stepping 03 Performance Events: Broken PMU hardware detected, using software events only. NMI watchdog disabled (cpu0): hardware events not enabled Brought up 1 CPUs Total of 1 processors activated (5199.99 BogoMIPS). devtmpfs: initialized regulator: core version 0.5 NET: Registered protocol family 16 ACPI: bus type pci registered PCI: Using configuration type 1 for base access bio: create slab at 0 ACPI: Interpreter enabled ACPI: (supports S0 S3 S4 S5) ACPI: Using IOAPIC for interrupt routing ACPI: No dock devices found. ACPI: PCI Root Bridge [PCI0] (0000:00) pci 0000:00:01.3: quirk: region 0600-063f claimed by PIIX4 ACPI pci 0000:00:01.3: quirk: region 0700-070f claimed by PIIX4 SMB ACPI: PCI Interrupt Link [LNKA] (IRQs 5 10 11) *0, disabled. ACPI: PCI Interrupt Link [LNKB] (IRQs 5 10 11) *0, disabled. ACPI: PCI Interrupt Link [LNKC] (IRQs 5 10 *11) ACPI: PCI Interrupt Link [LNKD] (IRQs 5 10 11) *0, disabled. ACPI: PCI Interrupt Link [LNKS] (IRQs *9) HEST: Table is not found! vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none vgaarb: loaded SCSI subsystem initialized usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb PCI: Using ACPI for IRQ routing NetLabel: Initializing NetLabel: domain hash size = 128 NetLabel: protocols = UNLABELED CIPSOv4 NetLabel: unlabeled traffic allowed by default hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 hpet0: 3 comparators, 64-bit 100.000000 MHz counter Switching to clocksource kvm-clock pnp: PnP ACPI init ACPI: bus type pnp registered pnp: PnP ACPI: found 11 devices ACPI: ACPI bus type pnp unregistered NET: Registered protocol family 2 IP route cache hash table entries: 65536 (order: 7, 524288 bytes) TCP established hash table entries: 262144 (order: 10, 4194304 bytes) TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) TCP: Hash tables configured (established 262144 bind 65536) TCP reno registered NET: Registered protocol family 1 pci 0000:00:00.0: Limiting direct PCI/PCI transfers pci 0000:00:01.0: Activating ISA DMA hang workarounds Trying to unpack rootfs image as initramfs... Freeing initrd memory: 4671k freed audit: initializing netlink socket (disabled) type=2000 audit(1453115563.181:1): initialized HugeTLB registered 2 MB page size, pre-allocated 0 pages VFS: Disk quotas dquot_6.5.2 Dquot-cache hash table entries: 512 (order 0, 4096 bytes) msgmni has been set to 4007 alg: No test for stdrng (krng) ksign: Installing public key data Loading keyring - Added public key D1C3198AB517476D - User ID: Red Hat, Inc. (Kernel Module GPG key) - Added public key D4A26C9CCD09BEDA - User ID: Red Hat Enterprise Linux Driver Update Program Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) pci_hotplug: PCI Hot Plug PCI Core version: 0.5 pciehp: PCI Express Hot Plug Controller Driver version: 0.4 acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 acpiphp: Slot [3] registered acpiphp: Slot [4] registered acpiphp: Slot [5] registered acpiphp: Slot [6] registered acpiphp: Slot [7] registered acpiphp: Slot [8] registered acpiphp: Slot [9] registered acpiphp: Slot [10] registered acpiphp: Slot [11] registered acpiphp: Slot [12] registered acpiphp: Slot [13] registered acpiphp: Slot [14] registered acpiphp: Slot [15] registered acpiphp: Slot [16] registered acpiphp: Slot [17] registered acpiphp: Slot [18] registered acpiphp: Slot [19] registered acpiphp: Slot [20] registered acpiphp: Slot [21] registered acpiphp: Slot [22] registered acpiphp: Slot [23] registered acpiphp: Slot [24] registered acpiphp: Slot [25] registered acpiphp: Slot [26] registered acpiphp: Slot [27] registered acpiphp: Slot [28] registered acpiphp: Slot [29] registered acpiphp: Slot [30] registered acpiphp: Slot [31] registered pci-stub: invalid id string "" input: Power Button as /class/input/input0 ACPI: Power Button [PWRF] processor LNXCPU:00: registered as cooling_device0 ERST: Table is not found! Non-volatile memory driver v1.3 Linux agpgart interface v0.103 crash memory driver: version 1.1 Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled ˙serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A 00:06: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A brd: module loaded loop: module loaded input: Macintosh mouse button emulation as /class/input/input1 Fixed MDIO Bus: probed ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver uhci_hcd: USB Universal Host Controller Interface driver PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12 serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice input: AT Translated Set 2 keyboard as /class/input/input2 rtc_cmos 00:01: RTC can wake from S4 rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0 rtc0: alarms up to one day, 114 bytes nvram, hpet irqs cpuidle: using governor ladder cpuidle: using governor menu usbcore: registered new interface driver hiddev usbcore: registered new interface driver usbhid usbhid: v2.6:USB HID core driver TCP cubic registered Initializing XFRM netlink socket NET: Registered protocol family 10 lo: Disabled Privacy Extensions NET: Registered protocol family 17 registered taskstats version 1 rtc_cmos 00:01: setting system clock to 2016-01-18 11:12:43 UTC (1453115563) Initalizing network drop monitor service Freeing unused kernel memory: 1232k freed Write protecting the kernel read-only data: 10240k Freeing unused kernel memory: 784k freed Freeing unused kernel memory: 1736k freed dracut: dracut-006-6.fc14 WARNING: Deprecated config file /etc/modprobe.conf, all config files belong into /etc/modprobe.d/. device-mapper: uevent: version 1.0.3 device-mapper: ioctl: 4.20.6-ioctl (2011-02-02) initialised: dm-devel@redhat.com udev[68]: starting version 161 dracut: Starting plymouth daemon %GCannot open font file latarcyrheb-sun16 %Gscsi0 : ata_piix scsi1 : ata_piix ata1: PATA max MWDMA2 cmd 0x1f0 ctl 0x3f6 bmdma 0xc040 irq 14 ata2: PATA max MWDMA2 cmd 0x170 ctl 0x376 bmdma 0xc048 irq 15 ata1.00: ATA-7: QEMU HARDDISK, 2.4.1, max UDMA/100 ata1.00: 209715200 sectors, multi 16: LBA48 ata1.00: configured for MWDMA2 scsi 0:0:0:0: Direct-Access ATA QEMU HARDDISK 2.4. PQ: 0 ANSI: 5 ata2.00: ATAPI: QEMU DVD-ROM, 2.4.1, max UDMA/100 ata2.00: configured for MWDMA2 scsi 1:0:0:0: CD-ROM QEMU QEMU DVD-ROM 2.4. PQ: 0 ANSI: 5 sd 0:0:0:0: [sda] 209715200 512-byte logical blocks: (107 GB/100 GiB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda: sda1 sd 0:0:0:0: [sda] Attached SCSI disk sr0: scsi3-mmc drive: 4x/4x cd/rw xa/form2 tray Uniform CD-ROM driver Revision: 3.20 WARNING: Deprecated config file /etc/modprobe.conf, all config files belong into /etc/modprobe.d/. input: ImExPS/2 Generic Explorer Mouse as /class/input/input3 dracut: Scanning devices sda1 for LVM volume groups dracut: Reading all physical volumes. This may take a while... dracut: Found volume group "planetlab" using metadata type lvm2 dracut: 3 logical volume(s) in volume group "planetlab" now active kjournald starting. Commit interval 5 seconds EXT3-fs (dm-1): mounted filesystem with ordered data mode dracut: Mounted root filesystem /dev/mapper/planetlab-root dracut: Switching root Welcome to Fedora Starting udev: udev[289]: starting version 161 %Gsd 0:0:0:0: Attached scsi generic sg0 type 0 sr 1:0:0:0: Attached scsi generic sg1 type 5 e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k6-1-NAPI e1000: Copyright (c) 1999-2006 Intel Corporation. ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11 e1000 0000:00:03.0: PCI INT A -> Link[LNKC] -> GSI 11 (level, high) -> IRQ 11 parport_pc 00:05: reported by Plug and Play ACPI parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE,EPP] e1000 0000:00:03.0: eth0: (PCI:33MHz:32-bit) 02:34:56:00:00:02 e1000 0000:00:03.0: eth0: Intel(R) PRO/1000 Network Connection piix4_smbus 0000:00:01.3: SMBus Host Controller at 0x700, revision 0 ppdev: user-space parallel port driver [ OK ] Setting hostname vnode02.pl.sophia.inria.fr: [ OK ] Setting up Logical Volume Management: 3 logical volume(s) in volume group "planetlab" now active [ OK ] Checking filesystems Checking all file systems. [/sbin/fsck.ext3 (1) -- /] fsck.ext3 -a /dev/mapper/planetlab-root /dev/mapper/planetlab-root: clean, 19656/917504 files, 270491/3670016 blocks [/sbin/fsck.ext3 (1) -- /vservers] fsck.ext3 -a /dev/mapper/planetlab-vservers /dev/mapper/planetlab-vservers: clean, 24361/5570560 files, 512234/22274048 blocks [ OK ] Remounting root filesystem in read-write mode: EXT3-fs (dm-1): using internal journal [ OK ] Mounting local filesystems: kjournald starting. Commit interval 5 seconds EXT3-fs (dm-2): using internal journal EXT3-fs (dm-2): mounted filesystem with ordered data mode [ OK ] Enabling local filesystem quotas: [ OK ] Enabling /etc/fstab swaps: Adding 1048568k swap on /dev/mapper/planetlab-swap. Priority:-1 extents:1 across:1048568k D [ OK ] Entering non-interactive startup Starting monitoring for VG planetlab: 3 logical volume(s) in volume group "planetlab" monitored [ OK ] iptables: Applying firewall rules: WARNING: Deprecated config file /etc/modprobe.conf, all config files belong into /etc/modprobe.d/. ip_tables: (C) 2000-2006 Netfilter Core Team [ OK ] iptables: Loading additional modules: ip_conntrack nf_conntrack version 0.5.0 (16384 buckets, 65536 max) [ OK ] my_mod_register ipfw called my_mod_register sy_ipfw called my_mod_register sy_Vnet_ipfw called my_mod_register dummynet called my_mod_register dn_fifo called my_mod_register dn_wf2qp called my_mod_register dn_rr called my_mod_register dn_qfq called my_mod_register dn_prio called init_children mod_idx value 9 +++ start module 0 ipfw ipfw at ffffffffa01baa80 order 0x1 +++ start module 1 sy_ipfw SYSINIT at (null) order 0x2 ipfw2 initialized, divert loadable, nat loadable, rule-based forwarding disabled, default to accept, logging disabled +++ start module 2 sy_Vnet_ipfw SYSINIT at (null) order 0x3 +++ start module 3 dummynet dummynet at ffffffffa01baac0 order 0x4 DUMMYNET (null) with IPv6 initialized (100409) +++ start module 4 dn_fifo dn_fifo at ffffffffa01bab10 order 0x5 load_dn_sched dn_sched FIFO loaded +++ start module 5 dn_wf2qp dn_wf2qp at ffffffffa01babf0 order 0x6 load_dn_sched dn_sched WF2Q+ loaded +++ start module 6 dn_rr dn_rr at ffffffffa01bacd0 order 0x7 load_dn_sched dn_sched RR loaded +++ start module 7 dn_qfq dn_qfq at ffffffffa01badb0 order 0x8 load_dn_sched dn_sched QFQ loaded +++ start module 8 dn_prio dn_prio at ffffffffa01bae90 order 0x9 load_dn_sched dn_sched PRIO loaded ipfw_module_init loaded [ OK ] Bringing up loopback interface: [ OK ] Bringing up interface eth0: e1000: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX [ OK ] PlanetLab Ping Of Death [ OK ] Starting system logger: [ OK ] Starting rpcbind: [ OK ] Starting NFS statd: [ OK ] Starting RPC idmapd: WARNING: Deprecated config file /etc/modprobe.conf, all config files belong into /etc/modprobe.d/. WARNING: Deprecated config file /etc/modprobe.conf, all config files belong into /etc/modprobe.d/. RPC: Registered udp transport module. RPC: Registered tcp transport module. RPC: Registered tcp NFSv4.1 backchannel transport module. [ OK ] Updating node configuration files: [ OK ] Mounting other filesystems: [ OK ] Retrigger failed udev events[ OK ] Creating required directories...[ OK ] Setting path to vshelper...[ OK ] Loading default device map...[ OK ] Mounting cgroup-hierarchy...[ OK ] Fixing /proc entries visibility...[ OK ] Generating SSH1 RSA host key: [ OK ] Starting sshd: [ OK ] starting fprobe-ulog:[ OK ] Starting pl_sshd:[ OK ] Starting ntpd: [ OK ] --- STARTING Mon Jan 18 11:12:52 UTC 2016 --- Building slice image for drl in drl-f14-x86_64: [ OK ] Building slice image for omf in omf-f14-x86_64: [ OK ] Building slice image for planetflow in planetflow-f14-x86_64: [ OK ] Updating slice images: [ OK ] --- DONE Mon Jan 18 11:12:59 UTC 2016 --- Starting sendmail: [ OK ] Starting sm-client: [ OK ] Starting vsys:Daemonizing [ OK ] starting codemux:[ OK ] Loading fuse modulefuse init (API version 7.13) . Starting crond: [ OK ] Starting atd: [ OK ] [ OK ] Starting Node Manager: Usage: vserver [-s|--sync] [-v|--verbose] [--silent] [--debug] [--] * is the name of a vserver. Possible commands are: start [--rescue [--rescue-init] *]] ... starts the specified vserver stop [--rescue-init] ... stops the specified vserver restart ... restarts the specified vserver; this is the subsequent execution of a synchronized 'stop' and a 'start' condrestart ... restarts the vserver when it is running already suexec ... executes a command as the specified user in the vserver exec ... executes a command as root in the vserver enter ... executes the configured shell in the vserver chkconfig ... modifies the init-system; currently, only Red Hat's chkconfig is supported running ... succeeds iff the vserver is running status ... gives out some human readable status information about the vserver, and succeeds iff the vserver is running build * ... builds a new vserver from scratch, see vserver ... build --help for details delete ... remove a vserver unify [-R] * ... (de)unify the vserver with its reference vserver(s). pkg install ... installs package(s) in the vserver apt-get,apt-config,apt-cache * ... execute the apt-* command for the given vserver rpm * ... execute the rpm command for the given vserver pkgmgmt externalize|internalize [-y] ... externalize or internalize the package-management for the given vserver. 'Externalize' means that package metadata and management tools (apt-get,rpm) are living in the host, while 'internalize' means that data and programs from the vserver will be used. hashify ... hashify the guest. Please report bugs to vserver@list.linux-vserver.org [ OK ] [ OK ] Starting swap monitor: [ OK ] ip_set version 4 loaded HTB: quantum of class 10001 is big. Consider r2q change. HTB: quantum of class 10010 is small. Consider r2q change. HTB: quantum of class 10100 is small. Consider r2q change. HTB: quantum of class 10020 is small. Consider r2q change. Regression TestLab Node: vnode02.pl.sophia.inria.fr Kernel 2.6.32-36.onelab.x86_64 on an x86_64 http://vplc02.pl.sophia.inria.fr/ This machine is a node in the Regression TestLab distributed network. If you require assistance in administering this node, please contact thierry.parmentelat@inria.fr. Console login to this node is restricted to site_admin. vnode02.pl.sophia.inria.fr login: