* 12:06:12 -- Checking if build provides SFA package... -> 12:06:12 -- + curl --silent http://build.onelab.eu/onelab//2016.01.18--f14-n3/RPMS/x86_64/ + grep -q sfa- * 12:06:12 -- build does provide SFA Sensing local substrate... xp qn Done =============== No plc running on buzzcocks {lxc-f23 257852.96484375 Mb} [max=20,free=20] (0 users, load: 0.96, 1.00, 1.04) =============== No qemu on boxtops {qemu-f23 257852.96875 Mb} [max=64,free=64] (load: 0.02, 0.04, 0.02) kvm_intel OK Sensing IP pool for vplcs . . . . . . . . . . . . . . . . . . . . . . . . . Done After having loaded 'starting': IP pool for vplcs S . . . . . . . . . . . . . . . . . . . . . . . . * 12:06:38 -- PROVISION plc plctest1 in box buzzcocks at IP vplc02.pl.sophia.inria.fr as 2016.01.18--f14-n3-1-vplc02 Sensing IP pool for vnodes . . . . . . . . . . . . . . . . . . . . Done After having loaded 'starting': IP pool for vnodes S . . . . . . . . . . . . . . . . . . . * 12:06:59 -- PROVISION node node1 in box boxtops at IP vnode02 with MAC 02:34:56:00:00:02 =============== Active plc VMs on buzzcocks {lxc-f23 257852.96484375 Mb} [max=20,free=18] (0 users, load: 0.96, 1.00, 1.04) == dummy_vplc01.pl.sophia.inria.fr == [=dummy_vplc01.pl.sophia.inria.fr] (pid=0) @ 2016-01-18:12-06 == dummy_plctest1 == [=dummy_plctest1] (pid=0) @ 2016-01-18:12-06 =============== Qemus on boxtops {qemu-f23 257852.96875 Mb} [max=64,free=62] (load: 0.02, 0.04, 0.02) kvm_intel OK == dummy_vnode01 == [=None] not (yet?) running @ 2016-01-18:12-06 == dummy_vnode02 == [=None] not (yet?) running @ 2016-01-18:12-06 * 12:06:59 -- ********** 1 RUNNING step show on plc plctest1_vplc02 + ======== site main site for plc number 1 + nodes : vnode02.pl.sophia.inria.fr + node=node1 host_box=boxtops hostname= vnode02.pl.sophia.inria.fr ip= 138.96.112.102 * 12:06:59 -- ********** 1 SUCCESSFUL step show on plctest1_vplc02 TRACE: 1 12-06-59->0s=0:00:00.000296s status=OK step=show plc=plctest1_vplc02 force=False * 12:06:59 -- ********** 1 RUNNING step plcvm_delete on plc plctest1_vplc02 -> 12:06:59 -- + ssh -n -o BatchMode=yes -o StrictHostKeyChecking=no -o CheckHostIP=no -o ConnectTimeout=5 -o UserKnownHostsFile=/dev/null buzzcocks mkdir -p 2016.01.18--f14-n3 Warning: Permanently added 'buzzcocks' (ECDSA) to the list of known hosts. -> 12:06:59 -- + ssh -n -o BatchMode=yes -o StrictHostKeyChecking=no -o CheckHostIP=no -o ConnectTimeout=5 -o UserKnownHostsFile=/dev/null buzzcocks cd 2016.01.18--f14-n3 ';' rm -f /vservers/2016.01.18--f14-n3-1-vplc02/2016.01.18--f14-n3-1-vplc02.timestamp Warning: Permanently added 'buzzcocks' (ECDSA) to the list of known hosts. -> 12:06:59 -- + ssh -n -o BatchMode=yes -o StrictHostKeyChecking=no -o CheckHostIP=no -o ConnectTimeout=5 -o UserKnownHostsFile=/dev/null buzzcocks cd 2016.01.18--f14-n3 ';' virsh -c lxc:// destroy 2016.01.18--f14-n3-1-vplc02 Warning: Permanently added 'buzzcocks' (ECDSA) to the list of known hosts. setlocale: No such file or directory error: failed to get domain '2016.01.18--f14-n3-1-vplc02' error: Domain not found: No domain with matching name '2016.01.18--f14-n3-1-vplc02' -> 12:06:59 -- + ssh -n -o BatchMode=yes -o StrictHostKeyChecking=no -o CheckHostIP=no -o ConnectTimeout=5 -o UserKnownHostsFile=/dev/null buzzcocks cd 2016.01.18--f14-n3 ';' virsh -c lxc:// undefine 2016.01.18--f14-n3-1-vplc02 Warning: Permanently added 'buzzcocks' (ECDSA) to the list of known hosts. setlocale: No such file or directory error: failed to get domain '2016.01.18--f14-n3-1-vplc02' error: Domain not found: No domain with matching name '2016.01.18--f14-n3-1-vplc02' -> 12:07:00 -- + ssh -n -o BatchMode=yes -o StrictHostKeyChecking=no -o CheckHostIP=no -o ConnectTimeout=5 -o UserKnownHostsFile=/dev/null buzzcocks cd 2016.01.18--f14-n3 ';' rm -fr /vservers/2016.01.18--f14-n3-1-vplc02 Warning: Permanently added 'buzzcocks' (ECDSA) to the list of known hosts. * 12:07:00 -- ********** 1 SUCCESSFUL step plcvm_delete on plctest1_vplc02 TRACE: 1 12-06-59->1s=0:00:01.395671s status=OK step=plcvm_delete plc=plctest1_vplc02 force=False * 12:07:00 -- ********** 1 RUNNING step plcvm_timestamp on plc plctest1_vplc02 -> 12:07:00 -- + ssh -n -o BatchMode=yes -o StrictHostKeyChecking=no -o CheckHostIP=no -o ConnectTimeout=5 -o UserKnownHostsFile=/dev/null buzzcocks mkdir -p /vservers/2016.01.18--f14-n3-1-vplc02 Warning: Permanently added 'buzzcocks' (ECDSA) to the list of known hosts. -> 12:07:00 -- + ssh -n -o BatchMode=yes -o StrictHostKeyChecking=no -o CheckHostIP=no -o ConnectTimeout=5 -o UserKnownHostsFile=/dev/null buzzcocks echo 1453115220 '>' /vservers/2016.01.18--f14-n3-1-vplc02/2016.01.18--f14-n3-1-vplc02.timestamp Warning: Permanently added 'buzzcocks' (ECDSA) to the list of known hosts. * 12:07:00 -- ********** 1 SUCCESSFUL step plcvm_timestamp on plctest1_vplc02 TRACE: 1 12-07-00->0s=0:00:00.535278s status=OK step=plcvm_timestamp plc=plctest1_vplc02 force=False * 12:07:00 -- ********** 1 RUNNING step plcvm_create on plc plctest1_vplc02 -> 12:07:00 -- + ssh -n -o BatchMode=yes -o StrictHostKeyChecking=no -o CheckHostIP=no -o ConnectTimeout=5 -o UserKnownHostsFile=/dev/null buzzcocks rm -rf 2016.01.18--f14-n3/build Warning: Permanently added 'buzzcocks' (ECDSA) to the list of known hosts. -> 12:07:01 -- + scp -o BatchMode=yes -o StrictHostKeyChecking=no -o CheckHostIP=no -o ConnectTimeout=5 -r build buzzcocks:2016.01.18--f14-n3/build -> 12:07:01 -- + ssh -n -o BatchMode=yes -o StrictHostKeyChecking=no -o CheckHostIP=no -o ConnectTimeout=5 -o UserKnownHostsFile=/dev/null buzzcocks cd 2016.01.18--f14-n3 ';' build/lbuild-initvm.sh -p linux64 -d onelab -f f14 -r http://build.onelab.eu/onelab//2016.01.18--f14-n3/RPMS -n vplc02.pl.sophia.inria.fr 2016.01.18--f14-n3-1-vplc02 Warning: Permanently added 'buzzcocks' (ECDSA) to the list of known hosts. Bridge already set up - skipping create_bridge_if_needed + set -e + lxc=2016.01.18--f14-n3-1-vplc02 + shift + fcdistro=f14 + shift + pldistro=onelab + shift + personality=linux64 + shift ++ lxcroot 2016.01.18--f14-n3-1-vplc02 ++ lxc=2016.01.18--f14-n3-1-vplc02 ++ shift ++ echo /vservers/2016.01.18--f14-n3-1-vplc02 + lxc_root=/vservers/2016.01.18--f14-n3-1-vplc02 ++ package_method f14 ++ fcdistro=f14 ++ shift ++ case $fcdistro in ++ echo yum + pkg_method=yum + case $pkg_method in + '[' -z '' ']' + fedora_install 2016.01.18--f14-n3-1-vplc02 + set -x + set -e + lxc=2016.01.18--f14-n3-1-vplc02 + shift ++ lxcroot 2016.01.18--f14-n3-1-vplc02 ++ lxc=2016.01.18--f14-n3-1-vplc02 ++ shift ++ echo /vservers/2016.01.18--f14-n3-1-vplc02 + lxc_root=/vservers/2016.01.18--f14-n3-1-vplc02 + cache=/var/cache/lxc/fedora/x86_64/14 + mkdir -p /var/cache/lxc/fedora/x86_64/14 + flock --exclusive --timeout 60 200 + '[' '!' -e /var/cache/lxc/fedora/x86_64/14/rootfs ']' Updating cache /var/cache/lxc/fedora/x86_64/14/rootfs ... + echo 'Updating cache /var/cache/lxc/fedora/x86_64/14/rootfs ...' + yum --installroot /var/cache/lxc/fedora/x86_64/14/rootfs --releasever 14 -y --nogpgcheck update Yum command has been deprecated, redirecting to '/usr/bin/dnf --installroot /var/cache/lxc/fedora/x86_64/14/rootfs --releasever 14 -y --nogpgcheck update'. See 'man dnf' and 'man yum2dnf' for more information. To transfer transaction metadata from yum to DNF, run: 'dnf install python-dnf-plugins-extras-migrate && dnf-2 migrate' Last metadata expiration check performed 1:46:44 ago on Mon Jan 18 10:20:17 2016. Dependencies resolved. Nothing to do. Complete! Failed to set locale, defaulting to C Update finished + echo 'Update finished' Filling /vservers/2016.01.18--f14-n3-1-vplc02 from /var/cache/lxc/fedora/x86_64/14/rootfs ... + echo 'Filling /vservers/2016.01.18--f14-n3-1-vplc02 from /var/cache/lxc/fedora/x86_64/14/rootfs ... ' + rsync -a /var/cache/lxc/fedora/x86_64/14/rootfs/ /vservers/2016.01.18--f14-n3-1-vplc02/ + return 0 + return 0 ++ lxcroot 2016.01.18--f14-n3-1-vplc02 ++ lxc=2016.01.18--f14-n3-1-vplc02 ++ shift ++ echo /vservers/2016.01.18--f14-n3-1-vplc02 + chroot /vservers/2016.01.18--f14-n3-1-vplc02 linux64 rm -rf /var/lib/rpm/__db.000 /var/lib/rpm/__db.001 /var/lib/rpm/__db.002 /var/lib/rpm/__db.003 /var/lib/rpm/__db.004 /var/lib/rpm/__db.005 /var/lib/rpm/__db.006 /var/lib/rpm/__db.007 /var/lib/rpm/__db.008 /var/lib/rpm/__db.009 ++ lxcroot 2016.01.18--f14-n3-1-vplc02 ++ lxc=2016.01.18--f14-n3-1-vplc02 ++ shift ++ echo /vservers/2016.01.18--f14-n3-1-vplc02 + chroot /vservers/2016.01.18--f14-n3-1-vplc02 linux64 rpm --rebuilddb rpmdb: __db_meta_setup: /var/lib/rpm/Name: unexpected file type or format error: cannot open Name index using db3 - Invalid argument (22) + fedora_configure 2016.01.18--f14-n3-1-vplc02 + set -x + set -e + lxc=2016.01.18--f14-n3-1-vplc02 + shift ++ lxcroot 2016.01.18--f14-n3-1-vplc02 ++ lxc=2016.01.18--f14-n3-1-vplc02 ++ shift ++ echo /vservers/2016.01.18--f14-n3-1-vplc02 + lxc_root=/vservers/2016.01.18--f14-n3-1-vplc02 + mkdir -p /vservers/2016.01.18--f14-n3-1-vplc02/selinux + echo 0 + case "$fcdistro" in + cat + cat + echo + dev_path=/vservers/2016.01.18--f14-n3-1-vplc02/dev + rm -rf /vservers/2016.01.18--f14-n3-1-vplc02/dev + mkdir -p /vservers/2016.01.18--f14-n3-1-vplc02/dev + mknod -m 666 /vservers/2016.01.18--f14-n3-1-vplc02/dev/null c 1 3 + mknod -m 666 /vservers/2016.01.18--f14-n3-1-vplc02/dev/zero c 1 5 + mknod -m 666 /vservers/2016.01.18--f14-n3-1-vplc02/dev/random c 1 8 + mknod -m 666 /vservers/2016.01.18--f14-n3-1-vplc02/dev/urandom c 1 9 + mkdir -m 755 /vservers/2016.01.18--f14-n3-1-vplc02/dev/pts + mkdir -m 1777 /vservers/2016.01.18--f14-n3-1-vplc02/dev/shm + mknod -m 666 /vservers/2016.01.18--f14-n3-1-vplc02/dev/tty c 5 0 + mknod -m 666 /vservers/2016.01.18--f14-n3-1-vplc02/dev/tty0 c 4 0 + mknod -m 666 /vservers/2016.01.18--f14-n3-1-vplc02/dev/tty1 c 4 1 + mknod -m 666 /vservers/2016.01.18--f14-n3-1-vplc02/dev/tty2 c 4 2 + mknod -m 666 /vservers/2016.01.18--f14-n3-1-vplc02/dev/tty3 c 4 3 + mknod -m 666 /vservers/2016.01.18--f14-n3-1-vplc02/dev/tty4 c 4 4 + mknod -m 600 /vservers/2016.01.18--f14-n3-1-vplc02/dev/console c 5 1 + mknod -m 666 /vservers/2016.01.18--f14-n3-1-vplc02/dev/full c 1 7 + mknod -m 600 /vservers/2016.01.18--f14-n3-1-vplc02/dev/initctl p + mknod -m 666 /vservers/2016.01.18--f14-n3-1-vplc02/dev/ptmx c 5 2 ++ echo f14 ++ cut -df -f2 + '[' 14 -le 14 ']' + fedora_configure_init 2016.01.18--f14-n3-1-vplc02 + set -e + set -x + lxc=2016.01.18--f14-n3-1-vplc02 + shift ++ lxcroot 2016.01.18--f14-n3-1-vplc02 ++ lxc=2016.01.18--f14-n3-1-vplc02 ++ shift ++ echo /vservers/2016.01.18--f14-n3-1-vplc02 + lxc_root=/vservers/2016.01.18--f14-n3-1-vplc02 + sed -i 's|.sbin.start_udev||' /vservers/2016.01.18--f14-n3-1-vplc02/etc/rc.sysinit + sed -i 's|.sbin.start_udev||' /vservers/2016.01.18--f14-n3-1-vplc02/etc/rc.d/rc.sysinit + sed -i 's/^.*dev.pts.*$/#\0/' /vservers/2016.01.18--f14-n3-1-vplc02/etc/rc.sysinit + sed -i 's/^.*dev.pts.*$/#\0/' /vservers/2016.01.18--f14-n3-1-vplc02/etc/rc.d/rc.sysinit + chroot /vservers/2016.01.18--f14-n3-1-vplc02 linux64 chkconfig udev-post off + chroot /vservers/2016.01.18--f14-n3-1-vplc02 linux64 chkconfig network on + guest_ifcfg=/vservers/2016.01.18--f14-n3-1-vplc02/etc/sysconfig/network-scripts/ifcfg-eth0 + '[' -n '' ']' + write_guest_ifcfg_publicip + cat + '[' -z '' ']' + fedora_configure_yum 2016.01.18--f14-n3-1-vplc02 f14 onelab + set -x + set -e + trap failure ERR INT + lxc=2016.01.18--f14-n3-1-vplc02 + shift + fcdistro=f14 + shift + pldistro=onelab + shift ++ lxcroot 2016.01.18--f14-n3-1-vplc02 ++ lxc=2016.01.18--f14-n3-1-vplc02 ++ shift ++ echo /vservers/2016.01.18--f14-n3-1-vplc02 + lxc_root=/vservers/2016.01.18--f14-n3-1-vplc02 + chroot /vservers/2016.01.18--f14-n3-1-vplc02 linux64 rpm --rebuilddb Initializing yum.repos.d in 2016.01.18--f14-n3-1-vplc02 + echo 'Initializing yum.repos.d in 2016.01.18--f14-n3-1-vplc02' + rm -f /vservers/2016.01.18--f14-n3-1-vplc02/etc/yum.repos.d/fedora.repo /vservers/2016.01.18--f14-n3-1-vplc02/etc/yum.repos.d/fedora.repo.rpmnew /vservers/2016.01.18--f14-n3-1-vplc02/etc/yum.repos.d/fedora-updates.repo /vservers/2016.01.18--f14-n3-1-vplc02/etc/yum.repos.d/fedora-updates.repo.rpmnew /vservers/2016.01.18--f14-n3-1-vplc02/etc/yum.repos.d/fedora-updates-testing.repo /vservers/2016.01.18--f14-n3-1-vplc02/etc/yum.repos.d/fedora-updates-testing.repo.rpmnew + cat + '[' -n http://build.onelab.eu/onelab//2016.01.18--f14-n3/RPMS ']' + '[' '!' -d /vservers/2016.01.18--f14-n3-1-vplc02/etc/yum.repos.d ']' ++ pl_plcyumexclude f14 onelab build ++ pl_yumexclude plcyumexclude f14 onelab build ++ keyword=plcyumexclude ++ shift ++ fcdistro=f14 ++ shift ++ pldistro=onelab ++ shift ++ builddir=build ++ shift +++ pl_locateDistroFile build onelab yumexclude.pkgs +++ builddir=build +++ shift +++ pldistro=onelab +++ shift +++ pkgsfile=yumexclude.pkgs +++ shift +++ pkgspath= +++ configdir=build/config.onelab +++ '[' '!' -d build/config.onelab ']' +++ paths='build/config.onelab/yumexclude.pkgs build/config.planetlab/yumexclude.pkgs' +++ for path in '$paths' +++ '[' -f build/config.onelab/yumexclude.pkgs ']' +++ for path in '$paths' +++ '[' -f build/config.planetlab/yumexclude.pkgs ']' +++ pkgspath=build/config.planetlab/yumexclude.pkgs +++ break +++ '[' -z build/config.planetlab/yumexclude.pkgs ']' +++ echo 'pl_locateDistroFile: using build/config.planetlab/yumexclude.pkgs' pl_locateDistroFile: using build/config.planetlab/yumexclude.pkgs +++ echo build/config.planetlab/yumexclude.pkgs +++ return 0 ++ yumexclude_file=build/config.planetlab/yumexclude.pkgs ++ type -p pkgs.py ++ pkgs.py -a x86_64 -f f14 -d onelab plcyumexclude build/config.planetlab/yumexclude.pkgs + yumexclude=drupal + for repo in '$lxc_root/etc/yum.repos.d/*' + '[' -f /vservers/2016.01.18--f14-n3-1-vplc02/etc/yum.repos.d/building.repo ']' + yumconf_exclude /vservers/2016.01.18--f14-n3-1-vplc02/etc/yum.repos.d/building.repo exclude=drupal + repo=/vservers/2016.01.18--f14-n3-1-vplc02/etc/yum.repos.d/building.repo + shift + yumexclude_line=exclude=drupal + shift + sed -i -e '/#baseurl=.*$/i\ exclude=drupal' /vservers/2016.01.18--f14-n3-1-vplc02/etc/yum.repos.d/building.repo + cat + return 0 + '[' -d /vservers/2016.01.18--f14-n3-1-vplc02/cgroup ']' + mkdir /vservers/2016.01.18--f14-n3-1-vplc02/cgroup + '[' -h /vservers/2016.01.18--f14-n3-1-vplc02/etc/resolv.conf ']' + cp /etc/resolv.conf /vservers/2016.01.18--f14-n3-1-vplc02/etc/resolv.conf + '[' -f /vservers/2016.01.18--f14-n3-1-vplc02/etc/hosts ']' + mkdir -p /vservers/2016.01.18--f14-n3-1-vplc02/root/.ssh + cat /root/.ssh/id_rsa.pub + chmod 700 /vservers/2016.01.18--f14-n3-1-vplc02/root/.ssh + chmod 600 /vservers/2016.01.18--f14-n3-1-vplc02/root/.ssh/authorized_keys + config_xml=/tmp/2016.01.18--f14-n3-1-vplc02.xml + '[' -n '' ']' + write_lxc_xml_publicip 2016.01.18--f14-n3-1-vplc02 + lxc=2016.01.18--f14-n3-1-vplc02 + shift ++ lxcroot 2016.01.18--f14-n3-1-vplc02 ++ lxc=2016.01.18--f14-n3-1-vplc02 ++ shift ++ echo /vservers/2016.01.18--f14-n3-1-vplc02 + lxc_root=/vservers/2016.01.18--f14-n3-1-vplc02 + cat + virsh -c lxc:/// define /tmp/2016.01.18--f14-n3-1-vplc02.xml setlocale: No such file or directory Domain 2016.01.18--f14-n3-1-vplc02 defined from /tmp/2016.01.18--f14-n3-1-vplc02.xml + return 0 + devel_or_test_tools 2016.01.18--f14-n3-1-vplc02 f14 onelab linux64 + set -x + set -e + trap failure ERR INT + lxc=2016.01.18--f14-n3-1-vplc02 + shift + fcdistro=f14 + shift + pldistro=onelab + shift + personality=linux64 + shift ++ lxcroot 2016.01.18--f14-n3-1-vplc02 ++ lxc=2016.01.18--f14-n3-1-vplc02 ++ shift ++ echo /vservers/2016.01.18--f14-n3-1-vplc02 + lxc_root=/vservers/2016.01.18--f14-n3-1-vplc02 ++ package_method f14 ++ fcdistro=f14 ++ shift ++ case $fcdistro in ++ echo yum + pkg_method=yum ++ pl_locateDistroFile build onelab runtime.pkgs ++ builddir=build ++ shift ++ pldistro=onelab ++ shift ++ pkgsfile=runtime.pkgs ++ shift ++ pkgspath= ++ configdir=build/config.onelab ++ '[' '!' -d build/config.onelab ']' ++ paths='build/config.onelab/runtime.pkgs build/config.planetlab/runtime.pkgs' ++ for path in '$paths' ++ '[' -f build/config.onelab/runtime.pkgs ']' ++ for path in '$paths' ++ '[' -f build/config.planetlab/runtime.pkgs ']' ++ pkgspath=build/config.planetlab/runtime.pkgs ++ break ++ '[' -z build/config.planetlab/runtime.pkgs ']' ++ echo 'pl_locateDistroFile: using build/config.planetlab/runtime.pkgs' pl_locateDistroFile: using build/config.planetlab/runtime.pkgs ++ echo build/config.planetlab/runtime.pkgs ++ return 0 + pkgsfile=build/config.planetlab/runtime.pkgs ++ chroot /vservers/2016.01.18--f14-n3-1-vplc02 linux64 uname -i + lxc_arch=x86_64 + '[' x86_64 = unknown ']' ++ pl_getPackages -a x86_64 f14 onelab build/config.planetlab/runtime.pkgs ++ pl_parsePkgs package -a x86_64 f14 onelab build/config.planetlab/runtime.pkgs ++ target_arch=x86_64 ++ keyword=package ++ shift ++ '[' -a == -a ']' ++ shift ++ target_arch=x86_64 ++ shift ++ fcdistro=f14 ++ shift ++ pldistro=onelab ++ shift ++ echo 'pl_parsePkgs: using -a x86_64 -f f14 -d onelab package build/config.planetlab/runtime.pkgs' pl_parsePkgs: using -a x86_64 -f f14 -d onelab package build/config.planetlab/runtime.pkgs ++ pkgs.py -a x86_64 -f f14 -d onelab package build/config.planetlab/runtime.pkgs + packages='bind-utils curl emacs-nox file openssh-clients yum-utils' ++ pl_getGroups -a x86_64 f14 onelab build/config.planetlab/runtime.pkgs ++ pl_parsePkgs group -a x86_64 f14 onelab build/config.planetlab/runtime.pkgs ++ target_arch=x86_64 ++ keyword=group ++ shift ++ '[' -a == -a ']' ++ shift ++ target_arch=x86_64 ++ shift ++ fcdistro=f14 ++ shift ++ pldistro=onelab ++ shift ++ echo 'pl_parsePkgs: using -a x86_64 -f f14 -d onelab group build/config.planetlab/runtime.pkgs' pl_parsePkgs: using -a x86_64 -f f14 -d onelab group build/config.planetlab/runtime.pkgs ++ pkgs.py -a x86_64 -f f14 -d onelab group build/config.planetlab/runtime.pkgs + groups= + case "$pkg_method" in + '[' -n 'bind-utils curl emacs-nox file openssh-clients yum-utils' ']' + chroot /vservers/2016.01.18--f14-n3-1-vplc02 linux64 yum -y install bind-utils curl emacs-nox file openssh-clients yum-utils Failed to set locale, defaulting to C Setting up Install Process Package curl-7.21.0-10.fc14.x86_64 already installed and latest version Package openssh-clients-5.5p1-24.fc14.2.x86_64 already installed and latest version Resolving Dependencies --> Running transaction check ---> Package bind-utils.x86_64 32:9.7.4-2.P1.fc14 set to be installed --> Processing Dependency: libdns.so.69()(64bit) for package: 32:bind-utils-9.7.4-2.P1.fc14.x86_64 --> Processing Dependency: libisccc.so.60()(64bit) for package: 32:bind-utils-9.7.4-2.P1.fc14.x86_64 --> Processing Dependency: libisc.so.62()(64bit) for package: 32:bind-utils-9.7.4-2.P1.fc14.x86_64 --> Processing Dependency: libisccfg.so.62()(64bit) for package: 32:bind-utils-9.7.4-2.P1.fc14.x86_64 --> Processing Dependency: liblwres.so.60()(64bit) for package: 32:bind-utils-9.7.4-2.P1.fc14.x86_64 --> Processing Dependency: libbind9.so.60()(64bit) for package: 32:bind-utils-9.7.4-2.P1.fc14.x86_64 ---> Package emacs-nox.x86_64 1:23.2-7.fc14 set to be installed --> Processing Dependency: emacs-common = 1:23.2-7.fc14 for package: 1:emacs-nox-23.2-7.fc14.x86_64 --> Processing Dependency: libasound.so.2(ALSA_0.9.0rc4)(64bit) for package: 1:emacs-nox-23.2-7.fc14.x86_64 --> Processing Dependency: libasound.so.2(ALSA_0.9)(64bit) for package: 1:emacs-nox-23.2-7.fc14.x86_64 --> Processing Dependency: libasound.so.2()(64bit) for package: 1:emacs-nox-23.2-7.fc14.x86_64 ---> Package file.x86_64 0:5.04-17.fc14 set to be installed ---> Package yum-utils.noarch 0:1.1.28-1.fc14 set to be installed --> Running transaction check ---> Package alsa-lib.x86_64 0:1.0.24-1.fc14 set to be installed ---> Package bind-libs.x86_64 32:9.7.4-2.P1.fc14 set to be installed ---> Package emacs-common.x86_64 1:23.2-7.fc14 set to be installed --> Processing Dependency: perl >= 1:5 for package: 1:emacs-common-23.2-7.fc14.x86_64 --> Processing Dependency: /usr/bin/perl for package: 1:emacs-common-23.2-7.fc14.x86_64 --> Processing Dependency: perl(Getopt::Long) for package: 1:emacs-common-23.2-7.fc14.x86_64 --> Processing Dependency: perl(vars) for package: 1:emacs-common-23.2-7.fc14.x86_64 --> Processing Dependency: perl(strict) for package: 1:emacs-common-23.2-7.fc14.x86_64 --> Running transaction check ---> Package perl.x86_64 4:5.12.4-148.fc14 set to be installed --> Processing Dependency: perl-libs = 4:5.12.4-148.fc14 for package: 4:perl-5.12.4-148.fc14.x86_64 --> Processing Dependency: perl(threads::shared) >= 1.21 for package: 4:perl-5.12.4-148.fc14.x86_64 --> Processing Dependency: perl(threads::shared) for package: 4:perl-5.12.4-148.fc14.x86_64 --> Processing Dependency: perl(Pod::Simple) for package: 4:perl-5.12.4-148.fc14.x86_64 --> Processing Dependency: perl(threads) for package: 4:perl-5.12.4-148.fc14.x86_64 --> Processing Dependency: perl-libs for package: 4:perl-5.12.4-148.fc14.x86_64 --> Processing Dependency: perl(Module::Pluggable) for package: 4:perl-5.12.4-148.fc14.x86_64 --> Processing Dependency: libperl.so()(64bit) for package: 4:perl-5.12.4-148.fc14.x86_64 --> Running transaction check ---> Package perl-Module-Pluggable.noarch 1:3.90-148.fc14 set to be installed ---> Package perl-Pod-Simple.noarch 1:3.13-148.fc14 set to be installed --> Processing Dependency: perl(Pod::Escapes) >= 1.04 for package: 1:perl-Pod-Simple-3.13-148.fc14.noarch ---> Package perl-libs.x86_64 4:5.12.4-148.fc14 set to be installed ---> Package perl-threads.x86_64 0:1.81-1.fc14 set to be installed ---> Package perl-threads-shared.x86_64 0:1.32-148.fc14 set to be installed --> Running transaction check ---> Package perl-Pod-Escapes.noarch 1:1.04-148.fc14 set to be installed --> Finished Dependency Resolution Dependencies Resolved ================================================================================ Package Arch Version Repository Size ================================================================================ Installing: bind-utils x86_64 32:9.7.4-2.P1.fc14 updates 178 k emacs-nox x86_64 1:23.2-7.fc14 fedora 1.8 M file x86_64 5.04-17.fc14 updates 46 k yum-utils noarch 1.1.28-1.fc14 fedora 82 k Installing for dependencies: alsa-lib x86_64 1.0.24-1.fc14 updates 386 k bind-libs x86_64 32:9.7.4-2.P1.fc14 updates 845 k emacs-common x86_64 1:23.2-7.fc14 fedora 20 M perl x86_64 4:5.12.4-148.fc14 updates 11 M perl-Module-Pluggable noarch 1:3.90-148.fc14 updates 39 k perl-Pod-Escapes noarch 1:1.04-148.fc14 updates 32 k perl-Pod-Simple noarch 1:3.13-148.fc14 updates 211 k perl-libs x86_64 4:5.12.4-148.fc14 updates 595 k perl-threads x86_64 1.81-1.fc14 fedora 47 k perl-threads-shared x86_64 1.32-148.fc14 updates 52 k Transaction Summary ================================================================================ Install 14 Package(s) Total download size: 35 M Installed size: 122 M Downloading Packages: -------------------------------------------------------------------------------- Total 74 MB/s | 35 MB 00:00 warning: rpmts_HdrFromFdno: Header V3 RSA/SHA256 Signature, key ID 97a1071f: NOKEY Importing GPG key 0x97A1071F: Userid: "Fedora (14) " From : http://mirror.onelab.eu/keys//RPM-GPG-KEY-fedora-14-primary Running rpm_check_debug Running Transaction Test Transaction Test Succeeded Running Transaction Installing : 1:perl-Pod-Escapes-1.04-148.fc14.noarch 1/14 Installing : 1:perl-Module-Pluggable-3.90-148.fc14.noarch 2/14 Installing : 1:perl-Pod-Simple-3.13-148.fc14.noarch 3/14 Installing : perl-threads-shared-1.32-148.fc14.x86_64 4/14 Installing : perl-threads-1.81-1.fc14.x86_64 5/14 Installing : 4:perl-libs-5.12.4-148.fc14.x86_64 6/14 Installing : 4:perl-5.12.4-148.fc14.x86_64 7/14 Installing : 1:emacs-common-23.2-7.fc14.x86_64 8/14 Installing : alsa-lib-1.0.24-1.fc14.x86_64 9/14 Installing : 32:bind-libs-9.7.4-2.P1.fc14.x86_64 10/14 Installing : 32:bind-utils-9.7.4-2.P1.fc14.x86_64 11/14 Installing : 1:emacs-nox-23.2-7.fc14.x86_64 12/14 Installing : file-5.04-17.fc14.x86_64 13/14 Installing : yum-utils-1.1.28-1.fc14.noarch 14/14 Installed: bind-utils.x86_64 32:9.7.4-2.P1.fc14 emacs-nox.x86_64 1:23.2-7.fc14 file.x86_64 0:5.04-17.fc14 yum-utils.noarch 0:1.1.28-1.fc14 Dependency Installed: alsa-lib.x86_64 0:1.0.24-1.fc14 bind-libs.x86_64 32:9.7.4-2.P1.fc14 emacs-common.x86_64 1:23.2-7.fc14 perl.x86_64 4:5.12.4-148.fc14 perl-Module-Pluggable.noarch 1:3.90-148.fc14 perl-Pod-Escapes.noarch 1:1.04-148.fc14 perl-Pod-Simple.noarch 1:3.13-148.fc14 perl-libs.x86_64 4:5.12.4-148.fc14 perl-threads.x86_64 0:1.81-1.fc14 perl-threads-shared.x86_64 0:1.32-148.fc14 Complete! + chroot /vservers/2016.01.18--f14-n3-1-vplc02 linux64 rpm -aq + return 0 + post_install 2016.01.18--f14-n3-1-vplc02 linux64 + lxc=2016.01.18--f14-n3-1-vplc02 + shift + personality=linux64 + shift ++ lxcroot 2016.01.18--f14-n3-1-vplc02 ++ lxc=2016.01.18--f14-n3-1-vplc02 ++ shift ++ echo /vservers/2016.01.18--f14-n3-1-vplc02 + lxc_root=/vservers/2016.01.18--f14-n3-1-vplc02 + cp /etc/localtime /vservers/2016.01.18--f14-n3-1-vplc02/etc/localtime + sshd_disable_password_auth 2016.01.18--f14-n3-1-vplc02 + lxc=2016.01.18--f14-n3-1-vplc02 + shift ++ lxcroot 2016.01.18--f14-n3-1-vplc02 ++ lxc=2016.01.18--f14-n3-1-vplc02 ++ shift ++ echo /vservers/2016.01.18--f14-n3-1-vplc02 + lxc_root=/vservers/2016.01.18--f14-n3-1-vplc02 + sed --in-place=.password -e 's,^#\?PasswordAuthentication.*,PasswordAuthentication no,' /vservers/2016.01.18--f14-n3-1-vplc02/etc/ssh/sshd_config + '[' -n '' ']' + post_install_myplc 2016.01.18--f14-n3-1-vplc02 linux64 + set -x + set -e + trap failure ERR INT + lxc=2016.01.18--f14-n3-1-vplc02 + shift + personality=linux64 + shift ++ lxcroot 2016.01.18--f14-n3-1-vplc02 ++ lxc=2016.01.18--f14-n3-1-vplc02 ++ shift ++ echo /vservers/2016.01.18--f14-n3-1-vplc02 + lxc_root=/vservers/2016.01.18--f14-n3-1-vplc02 + cat + chroot /vservers/2016.01.18--f14-n3-1-vplc02 linux64 bash -x + '[' -f /etc/sysconfig/network ']' + /sbin/chkconfig crond off error reading information on service crond: Bad file descriptor + /bin/cat Starting guest 2016.01.18--f14-n3-1-vplc02 + '[' -n true ']' + echo Starting guest 2016.01.18--f14-n3-1-vplc02 + virsh -c lxc:/// start 2016.01.18--f14-n3-1-vplc02 setlocale: No such file or directory Domain 2016.01.18--f14-n3-1-vplc02 started + '[' -n '' ']' + wait_for_ssh 2016.01.18--f14-n3-1-vplc02 138.96.112.72 + set -x + set -e + lxc=2016.01.18--f14-n3-1-vplc02 + shift + '[' -n 138.96.112.72 ']' + guest_ip=138.96.112.72 + shift + success= ++ date +%s + current_time=1453115238 + stop_time=1453115358 + counter=1 1-th attempt to reach sshd in container 2016.01.18--f14-n3-1-vplc02 ... + '[' 1453115238 -lt 1453115358 ']' + echo '1-th attempt to reach sshd in container 2016.01.18--f14-n3-1-vplc02 ...' + '[' -z 138.96.112.72 ']' + '[' -n 138.96.112.72 ']' + ssh -o 'StrictHostKeyChecking no' 138.96.112.72 'uname -i' ssh: connect to host 138.96.112.72 port 22: Connection refused + : + counter=2 + sleep 10 ++ date +%s + current_time=1453115250 + '[' 1453115250 -lt 1453115358 ']' 2-th attempt to reach sshd in container 2016.01.18--f14-n3-1-vplc02 ... + echo '2-th attempt to reach sshd in container 2016.01.18--f14-n3-1-vplc02 ...' + '[' -z 138.96.112.72 ']' + '[' -n 138.96.112.72 ']' + ssh -o 'StrictHostKeyChecking no' 138.96.112.72 'uname -i' @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@ @ WARNING: REMOTE HOST IDENTIFICATION HAS CHANGED! @ @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@ IT IS POSSIBLE THAT SOMEONE IS DOING SOMETHING NASTY! Someone could be eavesdropping on you right now (man-in-the-middle attack)! It is also possible that a host key has just been changed. The fingerprint for the RSA key sent by the remote host is SHA256:FSD0jIDX4960COxlUnGAQX2yqsgkj8naTOppZwyCcwg. Please contact your system administrator. Add correct host key in /root/.ssh/known_hosts to get rid of this message. Offending ECDSA key in /root/.ssh/known_hosts:12 Password authentication is disabled to avoid man-in-the-middle attacks. Keyboard-interactive authentication is disabled to avoid man-in-the-middle attacks. x86_64 SSHD in container 2016.01.18--f14-n3-1-vplc02 is UP on IP 138.96.112.72 + success=true + echo 'SSHD in container 2016.01.18--f14-n3-1-vplc02 is UP on IP 138.96.112.72' + break + '[' -z true ']' + return 0 lbuild-initvm.sh Done + echo lbuild-initvm.sh Done + exit 0 * 12:07:31 -- ********** 1 SUCCESSFUL step plcvm_create on plctest1_vplc02 TRACE: 1 12-07-00->30s=0:00:30.080257s status=OK step=plcvm_create plc=plctest1_vplc02 force=False * 12:07:31 -- ********** 1 RUNNING step plc_install on plc plctest1_vplc02 -> 12:07:31 -- + ssh -n -o BatchMode=yes -o StrictHostKeyChecking=no -o CheckHostIP=no -o ConnectTimeout=5 -o UserKnownHostsFile=/dev/null buzzcocks ssh -o BatchMode=yes -o StrictHostKeyChecking=no -o CheckHostIP=no -o ConnectTimeout=5 -o UserKnownHostsFile=/dev/null vplc02 yum -y install slicerepo-onelab-f14-x86_64 myplc noderepo-onelab-f14-x86_64 Warning: Permanently added 'buzzcocks' (ECDSA) to the list of known hosts. Warning: Permanently added 'vplc02' (RSA) to the list of known hosts. Failed to set locale, defaulting to C Setting up Install Process Resolving Dependencies --> Running transaction check ---> Package myplc.noarch 0:5.3-3.onelab set to be installed --> Processing Dependency: plcapi >= 5.2 for package: myplc-5.3-3.onelab.noarch --> Processing Dependency: rsync for package: myplc-5.3-3.onelab.noarch --> Processing Dependency: xmlsec1-openssl for package: myplc-5.3-3.onelab.noarch --> Processing Dependency: myplc-release for package: myplc-5.3-3.onelab.noarch --> Processing Dependency: www-register-wizard for package: myplc-5.3-3.onelab.noarch --> Processing Dependency: xmlsec1 for package: myplc-5.3-3.onelab.noarch --> Processing Dependency: tar for package: myplc-5.3-3.onelab.noarch --> Processing Dependency: ed for package: myplc-5.3-3.onelab.noarch --> Processing Dependency: /usr/bin/plcsh for package: myplc-5.3-3.onelab.noarch --> Processing Dependency: myplc-docs for package: myplc-5.3-3.onelab.noarch --> Processing Dependency: mod_python for package: myplc-5.3-3.onelab.noarch --> Processing Dependency: expect for package: myplc-5.3-3.onelab.noarch --> Processing Dependency: nodeconfig for package: myplc-5.3-3.onelab.noarch --> Processing Dependency: cronie for package: myplc-5.3-3.onelab.noarch --> Processing Dependency: bootcd-initscripts for package: myplc-5.3-3.onelab.noarch --> Processing Dependency: php for package: myplc-5.3-3.onelab.noarch --> Processing Dependency: sendmail-cf for package: myplc-5.3-3.onelab.noarch --> Processing Dependency: redhat-lsb for package: myplc-5.3-3.onelab.noarch --> Processing Dependency: sendmail for package: myplc-5.3-3.onelab.noarch --> Processing Dependency: nodeyum for package: myplc-5.3-3.onelab.noarch --> Processing Dependency: bootcd-onelab-f14-x86_64 for package: myplc-5.3-3.onelab.noarch --> Processing Dependency: wget for package: myplc-5.3-3.onelab.noarch --> Processing Dependency: bzip2 for package: myplc-5.3-3.onelab.noarch --> Processing Dependency: dnsmasq for package: myplc-5.3-3.onelab.noarch --> Processing Dependency: createrepo for package: myplc-5.3-3.onelab.noarch --> Processing Dependency: PLCWWW for package: myplc-5.3-3.onelab.noarch --> Processing Dependency: bootmanager for package: myplc-5.3-3.onelab.noarch --> Processing Dependency: nodeimage-onelab-f14-x86_64 for package: myplc-5.3-3.onelab.noarch --> Processing Dependency: python-devel for package: myplc-5.3-3.onelab.noarch --> Processing Dependency: php-pgsql for package: myplc-5.3-3.onelab.noarch --> Processing Dependency: myplc-config for package: myplc-5.3-3.onelab.noarch ---> Package noderepo-onelab-f14-x86_64.noarch 0:5.2-6.2016.01.18 set to be installed ---> Package slicerepo-onelab-f14-x86_64.noarch 0:5.2-6.2016.01.18 set to be installed --> Running transaction check ---> Package bootcd-initscripts.noarch 0:5.3-3.2016.01.18 set to be installed ---> Package bootcd-onelab-f14-x86_64.noarch 0:5.3-3.2016.01.18 set to be installed --> Processing Dependency: mkisofs for package: bootcd-onelab-f14-x86_64-5.3-3.2016.01.18.noarch --> Processing Dependency: syslinux for package: bootcd-onelab-f14-x86_64-5.3-3.2016.01.18.noarch --> Processing Dependency: syslinux-perl for package: bootcd-onelab-f14-x86_64-5.3-3.2016.01.18.noarch --> Processing Dependency: mtools for package: bootcd-onelab-f14-x86_64-5.3-3.2016.01.18.noarch --> Processing Dependency: pyplnet for package: bootcd-onelab-f14-x86_64-5.3-3.2016.01.18.noarch --> Processing Dependency: dosfstools for package: bootcd-onelab-f14-x86_64-5.3-3.2016.01.18.noarch ---> Package bootmanager.x86_64 0:5.3-4.onelab set to be installed --> Processing Dependency: gnupg for package: bootmanager-5.3-4.onelab.x86_64 --> Processing Dependency: pypcilib for package: bootmanager-5.3-4.onelab.x86_64 --> Processing Dependency: httpd for package: bootmanager-5.3-4.onelab.x86_64 --> Processing Dependency: sharutils for package: bootmanager-5.3-4.onelab.x86_64 ---> Package bzip2.x86_64 0:1.0.6-1.fc14.1 set to be installed ---> Package createrepo.noarch 0:0.9.8-5.fc14 set to be installed --> Processing Dependency: deltarpm for package: createrepo-0.9.8-5.fc14.noarch --> Processing Dependency: libxml2-python for package: createrepo-0.9.8-5.fc14.noarch --> Processing Dependency: python-deltarpm for package: createrepo-0.9.8-5.fc14.noarch ---> Package cronie.x86_64 0:1.4.8-2.fc14 set to be installed --> Processing Dependency: dailyjobs for package: cronie-1.4.8-2.fc14.x86_64 ---> Package dnsmasq.x86_64 0:2.52-1.fc13 set to be installed ---> Package ed.x86_64 0:1.4-2.fc14 set to be installed ---> Package expect.x86_64 0:5.44.1.15-2.fc14 set to be installed --> Processing Dependency: libtcl8.5.so()(64bit) for package: expect-5.44.1.15-2.fc14.x86_64 ---> Package mod_python.x86_64 0:3.3.1-14.fc14 set to be installed ---> Package myplc-config.noarch 0:5.3-3.onelab set to be installed ---> Package myplc-docs.noarch 0:5.3-3.onelab set to be installed ---> Package myplc-release.noarch 0:5.3-3.onelab.2016.01.18 set to be installed ---> Package nodeconfig.x86_64 0:5.2-5.onelab set to be installed ---> Package nodeimage-onelab-f14-x86_64.noarch 0:5.2-6.2016.01.18 set to be installed ---> Package nodeyum.noarch 0:5.2-6.2016.01.18 set to be installed ---> Package php.x86_64 0:5.3.8-3.fc14 set to be installed --> Processing Dependency: php-cli = 5.3.8-3.fc14 for package: php-5.3.8-3.fc14.x86_64 --> Processing Dependency: php-common = 5.3.8-3.fc14 for package: php-5.3.8-3.fc14.x86_64 ---> Package php-pgsql.x86_64 0:5.3.8-3.fc14 set to be installed --> Processing Dependency: php-pdo for package: php-pgsql-5.3.8-3.fc14.x86_64 --> Processing Dependency: libpq.so.5()(64bit) for package: php-pgsql-5.3.8-3.fc14.x86_64 ---> Package plcapi.x86_64 0:5.3-9.onelab set to be installed --> Processing Dependency: postgresql >= 8.2 for package: plcapi-5.3-9.onelab.x86_64 --> Processing Dependency: postgresql-server >= 8.2 for package: plcapi-5.3-9.onelab.x86_64 --> Processing Dependency: pcucontrol >= 1.0-6 for package: plcapi-5.3-9.onelab.x86_64 --> Processing Dependency: pyaspects >= 0.4 for package: plcapi-5.3-9.onelab.x86_64 --> Processing Dependency: python-lxml for package: plcapi-5.3-9.onelab.x86_64 --> Processing Dependency: python-psycopg2 for package: plcapi-5.3-9.onelab.x86_64 --> Processing Dependency: SOAPpy for package: plcapi-5.3-9.onelab.x86_64 --> Processing Dependency: python-ldap for package: plcapi-5.3-9.onelab.x86_64 --> Processing Dependency: mod_ssl for package: plcapi-5.3-9.onelab.x86_64 --> Processing Dependency: postgresql-python for package: plcapi-5.3-9.onelab.x86_64 --> Processing Dependency: python-twisted-words for package: plcapi-5.3-9.onelab.x86_64 --> Processing Dependency: python-twisted-web for package: plcapi-5.3-9.onelab.x86_64 --> Processing Dependency: memcached for package: plcapi-5.3-9.onelab.x86_64 --> Processing Dependency: python-memcached for package: plcapi-5.3-9.onelab.x86_64 --> Processing Dependency: Django for package: plcapi-5.3-9.onelab.x86_64 --> Processing Dependency: python-simplejson for package: plcapi-5.3-9.onelab.x86_64 ---> Package plewww.noarch 0:5.2-6 set to be installed --> Processing Dependency: drupal = 4.7 for package: plewww-5.2-6.noarch --> Processing Dependency: plewww-plekit for package: plewww-5.2-6.noarch ---> Package python-devel.x86_64 0:2.7-8.fc14.1 set to be installed ---> Package redhat-lsb.x86_64 0:4.0-5.fc14 set to be installed --> Processing Dependency: /usr/bin/make for package: redhat-lsb-4.0-5.fc14.x86_64 --> Processing Dependency: /usr/bin/batch for package: redhat-lsb-4.0-5.fc14.x86_64 --> Processing Dependency: /usr/bin/m4 for package: redhat-lsb-4.0-5.fc14.x86_64 --> Processing Dependency: /usr/bin/msgfmt for package: redhat-lsb-4.0-5.fc14.x86_64 --> Processing Dependency: /usr/bin/at for package: redhat-lsb-4.0-5.fc14.x86_64 --> Processing Dependency: /usr/bin/ar for package: redhat-lsb-4.0-5.fc14.x86_64 --> Processing Dependency: /bin/gettext for package: redhat-lsb-4.0-5.fc14.x86_64 --> Processing Dependency: /usr/bin/bc for package: redhat-lsb-4.0-5.fc14.x86_64 --> Processing Dependency: /usr/bin/man for package: redhat-lsb-4.0-5.fc14.x86_64 --> Processing Dependency: /usr/bin/strip for package: redhat-lsb-4.0-5.fc14.x86_64 --> Processing Dependency: /usr/bin/pax for package: redhat-lsb-4.0-5.fc14.x86_64 --> Processing Dependency: /usr/bin/time for package: redhat-lsb-4.0-5.fc14.x86_64 --> Processing Dependency: /bin/mailx for package: redhat-lsb-4.0-5.fc14.x86_64 --> Processing Dependency: /usr/bin/patch for package: redhat-lsb-4.0-5.fc14.x86_64 ---> Package rsync.x86_64 0:3.0.8-2.fc14 set to be installed ---> Package sendmail.x86_64 0:8.14.4-10.fc14 set to be installed --> Processing Dependency: procmail for package: sendmail-8.14.4-10.fc14.x86_64 --> Processing Dependency: /usr/sbin/saslauthd for package: sendmail-8.14.4-10.fc14.x86_64 --> Processing Dependency: libdb-5.0.so()(64bit) for package: sendmail-8.14.4-10.fc14.x86_64 --> Processing Dependency: libhesiod.so.0()(64bit) for package: sendmail-8.14.4-10.fc14.x86_64 ---> Package sendmail-cf.noarch 0:8.14.4-10.fc14 set to be installed ---> Package tar.x86_64 2:1.23-9.fc14 set to be installed ---> Package wget.x86_64 0:1.12-4.fc14 set to be installed ---> Package www-register-wizard.noarch 0:4.3-5.onelab set to be installed ---> Package xmlsec1.x86_64 0:1.2.16-3.fc14 set to be installed --> Processing Dependency: libxslt.so.1(LIBXML2_1.0.11)(64bit) for package: xmlsec1-1.2.16-3.fc14.x86_64 --> Processing Dependency: libltdl.so.7()(64bit) for package: xmlsec1-1.2.16-3.fc14.x86_64 --> Processing Dependency: libxslt.so.1()(64bit) for package: xmlsec1-1.2.16-3.fc14.x86_64 ---> Package xmlsec1-openssl.x86_64 0:1.2.16-3.fc14 set to be installed --> Running transaction check ---> Package Django.noarch 0:1.3.1-2.fc14 set to be installed ---> Package PyGreSQL.x86_64 0:3.8.1-3.fc14 set to be installed ---> Package SOAPpy.noarch 0:0.11.6-12.fc14 set to be installed --> Processing Dependency: python-fpconst >= 0.6.0 for package: SOAPpy-0.11.6-12.fc14.noarch --> Processing Dependency: PyXML >= 0.8.3 for package: SOAPpy-0.11.6-12.fc14.noarch --> Processing Dependency: m2crypto for package: SOAPpy-0.11.6-12.fc14.noarch ---> Package at.x86_64 0:3.1.12-6.fc14 set to be installed ---> Package bc.x86_64 0:1.06.95-2.fc14 set to be installed ---> Package binutils.x86_64 0:2.20.51.0.7-8.fc14 set to be installed ---> Package cronie-anacron.x86_64 0:1.4.8-2.fc14 set to be installed --> Processing Dependency: crontabs for package: cronie-anacron-1.4.8-2.fc14.x86_64 ---> Package cyrus-sasl.x86_64 0:2.1.23-12.fc14 set to be installed ---> Package deltarpm.x86_64 0:3.6-0.6.20110223git.fc14 set to be installed ---> Package dosfstools.x86_64 0:3.0.9-6.fc14 set to be installed ---> Package drupal.noarch 0:4.7-15.onelab.2016.01.18 set to be installed --> Processing Dependency: php-gd for package: drupal-4.7-15.onelab.2016.01.18.noarch --> Processing Dependency: php-mbstring for package: drupal-4.7-15.onelab.2016.01.18.noarch ---> Package genisoimage.x86_64 0:1.1.11-3.fc14 set to be installed ---> Package gettext.x86_64 0:0.18.1.1-5.fc14 set to be installed --> Processing Dependency: libgomp.so.1(GOMP_1.0)(64bit) for package: gettext-0.18.1.1-5.fc14.x86_64 --> Processing Dependency: libgettextlib-0.18.1.so()(64bit) for package: gettext-0.18.1.1-5.fc14.x86_64 --> Processing Dependency: libgettextsrc-0.18.1.so()(64bit) for package: gettext-0.18.1.1-5.fc14.x86_64 --> Processing Dependency: libgomp.so.1()(64bit) for package: gettext-0.18.1.1-5.fc14.x86_64 ---> Package gnupg.x86_64 0:1.4.11-2.fc14 set to be installed ---> Package hesiod.x86_64 0:3.1.0-19.fc14 set to be installed ---> Package httpd.x86_64 0:2.2.17-1.fc14 set to be installed --> Processing Dependency: httpd-tools = 2.2.17-1.fc14 for package: httpd-2.2.17-1.fc14.x86_64 --> Processing Dependency: system-logos >= 7.92.1-1 for package: httpd-2.2.17-1.fc14.x86_64 --> Processing Dependency: apr-util-ldap for package: httpd-2.2.17-1.fc14.x86_64 --> Processing Dependency: /etc/mime.types for package: httpd-2.2.17-1.fc14.x86_64 --> Processing Dependency: libaprutil-1.so.0()(64bit) for package: httpd-2.2.17-1.fc14.x86_64 --> Processing Dependency: libapr-1.so.0()(64bit) for package: httpd-2.2.17-1.fc14.x86_64 ---> Package libdb.x86_64 0:5.0.26-2.fc14 set to be installed ---> Package libtool-ltdl.x86_64 0:2.2.10-3.fc14 set to be installed ---> Package libxml2-python.x86_64 0:2.7.7-3.fc14 set to be installed ---> Package libxslt.x86_64 0:1.1.26-3.fc14 set to be installed ---> Package m4.x86_64 0:1.4.14-1.fc14 set to be installed ---> Package mailx.x86_64 0:12.5-1.fc14 set to be installed ---> Package make.x86_64 1:3.82-3.fc14 set to be installed ---> Package man-db.x86_64 0:2.5.7-9.fc14 set to be installed --> Processing Dependency: groff for package: man-db-2.5.7-9.fc14.x86_64 ---> Package memcached.x86_64 0:1.4.5-3.fc14 set to be installed --> Processing Dependency: libevent for package: memcached-1.4.5-3.fc14.x86_64 --> Processing Dependency: libevent-1.4.so.2()(64bit) for package: memcached-1.4.5-3.fc14.x86_64 ---> Package mod_ssl.x86_64 1:2.2.17-1.fc14 set to be installed --> Processing Dependency: libdistcache.so.1()(64bit) for package: 1:mod_ssl-2.2.17-1.fc14.x86_64 --> Processing Dependency: libnal.so.1()(64bit) for package: 1:mod_ssl-2.2.17-1.fc14.x86_64 ---> Package mtools.x86_64 0:4.0.13-2.fc14 set to be installed ---> Package patch.x86_64 0:2.6.1-8.fc14 set to be installed ---> Package pax.x86_64 0:3.4-10.fc12 set to be installed ---> Package pcucontrol.x86_64 0:1.0-13.onelab set to be installed --> Processing Dependency: OpenIPMI-tools for package: pcucontrol-1.0-13.onelab.x86_64 --> Processing Dependency: perl(IO::Socket::SSL) for package: pcucontrol-1.0-13.onelab.x86_64 ---> Package php-cli.x86_64 0:5.3.8-3.fc14 set to be installed ---> Package php-common.x86_64 0:5.3.8-3.fc14 set to be installed ---> Package php-pdo.x86_64 0:5.3.8-3.fc14 set to be installed ---> Package plewww-plekit.noarch 0:5.2-6 set to be installed ---> Package postgresql.x86_64 0:8.4.9-1.fc14 set to be installed ---> Package postgresql-libs.x86_64 0:8.4.9-1.fc14 set to be installed ---> Package postgresql-server.x86_64 0:8.4.9-1.fc14 set to be installed ---> Package procmail.x86_64 0:3.22-25.fc12 set to be installed ---> Package pyaspects.x86_64 0:0.4.1-3.onelab set to be installed ---> Package pypcilib.x86_64 0:0.2-11.onelab set to be installed --> Processing Dependency: /sbin/lspci for package: pypcilib-0.2-11.onelab.x86_64 ---> Package pyplnet.noarch 0:4.3-18.onelab set to be installed ---> Package python-deltarpm.x86_64 0:3.6-0.6.20110223git.fc14 set to be installed ---> Package python-ldap.x86_64 0:2.3.10-2.fc14 set to be installed ---> Package python-lxml.x86_64 0:2.2.8-1.fc14 set to be installed ---> Package python-memcached.noarch 0:1.47-1.fc14 set to be installed ---> Package python-psycopg2.x86_64 0:2.2.2-2.fc14 set to be installed ---> Package python-simplejson.x86_64 0:2.1.6-1.fc14.1 set to be installed ---> Package python-twisted-web.x86_64 0:10.1.0-1.fc14 set to be installed --> Processing Dependency: python-twisted-core >= 10.1.0 for package: python-twisted-web-10.1.0-1.fc14.x86_64 ---> Package python-twisted-words.x86_64 0:10.1.0-2.fc14 set to be installed ---> Package sharutils.x86_64 0:4.10-1.fc14 set to be installed ---> Package syslinux.x86_64 0:4.02-3.fc14 set to be installed ---> Package syslinux-perl.x86_64 0:4.02-3.fc14 set to be installed --> Processing Dependency: perl(Crypt::PasswdMD5) for package: syslinux-perl-4.02-3.fc14.x86_64 --> Processing Dependency: perl(Digest::SHA1) for package: syslinux-perl-4.02-3.fc14.x86_64 ---> Package tcl.x86_64 1:8.5.9-2.fc14 set to be installed ---> Package time.x86_64 0:1.7-38.fc14 set to be installed --> Running transaction check ---> Package PyXML.x86_64 0:0.8.4-25.fc14 set to be installed ---> Package apr.x86_64 0:1.4.5-1.fc14 set to be installed ---> Package apr-util.x86_64 0:1.3.12-1.fc14 set to be installed ---> Package apr-util-ldap.x86_64 0:1.3.12-1.fc14 set to be installed ---> Package crontabs.noarch 0:1.11-1.20101115git.fc14 set to be installed ---> Package distcache.x86_64 0:1.4.5-21 set to be installed ---> Package fedora-logos.noarch 0:14.0.2-1.fc14 set to be installed ---> Package gettext-libs.x86_64 0:0.18.1.1-5.fc14 set to be installed ---> Package groff.x86_64 0:1.20.1-3.fc14 set to be installed ---> Package httpd-tools.x86_64 0:2.2.17-1.fc14 set to be installed ---> Package ipmitool.x86_64 0:1.8.11-5.fc14 set to be installed ---> Package libevent.x86_64 0:1.4.14b-1.fc14 set to be installed ---> Package libgomp.x86_64 0:4.5.1-4.fc14 set to be installed ---> Package m2crypto.x86_64 0:0.20.2-9.fc14 set to be installed ---> Package mailcap.noarch 0:2.1.35-1.fc14 set to be installed ---> Package pciutils.x86_64 0:3.1.7-3.fc14 set to be installed --> Processing Dependency: libpci.so.3(LIBPCI_3.0)(64bit) for package: pciutils-3.1.7-3.fc14.x86_64 --> Processing Dependency: libpci.so.3(LIBPCI_3.1)(64bit) for package: pciutils-3.1.7-3.fc14.x86_64 --> Processing Dependency: libpci.so.3()(64bit) for package: pciutils-3.1.7-3.fc14.x86_64 ---> Package perl-Crypt-PasswdMD5.noarch 0:1.3-7.fc14 set to be installed ---> Package perl-Digest-SHA1.x86_64 0:2.12-4.fc14 set to be installed ---> Package perl-IO-Socket-SSL.noarch 0:1.38-1.fc14 set to be installed --> Processing Dependency: perl(Net::SSLeay) >= 1.21 for package: perl-IO-Socket-SSL-1.38-1.fc14.noarch --> Processing Dependency: perl(Net::LibIDN) for package: perl-IO-Socket-SSL-1.38-1.fc14.noarch ---> Package php-gd.x86_64 0:5.3.8-3.fc14 set to be installed --> Processing Dependency: libjpeg.so.62(LIBJPEG_6.2)(64bit) for package: php-gd-5.3.8-3.fc14.x86_64 --> Processing Dependency: libjpeg.so.62()(64bit) for package: php-gd-5.3.8-3.fc14.x86_64 --> Processing Dependency: libt1.so.5()(64bit) for package: php-gd-5.3.8-3.fc14.x86_64 --> Processing Dependency: libXpm.so.4()(64bit) for package: php-gd-5.3.8-3.fc14.x86_64 ---> Package php-mbstring.x86_64 0:5.3.8-3.fc14 set to be installed ---> Package python-fpconst.noarch 0:0.7.3-7.fc14 set to be installed ---> Package python-twisted-core.x86_64 0:10.1.0-3.fc14 set to be installed --> Processing Dependency: pyOpenSSL for package: python-twisted-core-10.1.0-3.fc14.x86_64 --> Processing Dependency: python-zope-interface for package: python-twisted-core-10.1.0-3.fc14.x86_64 --> Processing Dependency: pyserial for package: python-twisted-core-10.1.0-3.fc14.x86_64 --> Running transaction check ---> Package libXpm.x86_64 0:3.5.8-2.fc13 set to be installed ---> Package libjpeg-turbo.x86_64 0:1.1.1-1.fc14 set to be installed ---> Package pciutils-libs.x86_64 0:3.1.7-3.fc14 set to be installed ---> Package perl-Net-LibIDN.x86_64 0:0.12-4.fc14 set to be installed ---> Package perl-Net-SSLeay.x86_64 0:1.36-2.fc14 set to be installed ---> Package pyOpenSSL.x86_64 0:0.9-3.fc14 set to be installed ---> Package pyserial.noarch 0:2.5-1.fc14 set to be installed ---> Package python-zope-interface.x86_64 0:3.6.1-7.fc14 set to be installed ---> Package t1lib.x86_64 0:5.1.2-6.fc14 set to be installed --> Finished Dependency Resolution Dependencies Resolved ================================================================================ Package Arch Version Repository Size ================================================================================ Installing: myplc noarch 5.3-3.onelab myplc 82 k noderepo-onelab-f14-x86_64 noarch 5.2-6.2016.01.18 myplc 160 M slicerepo-onelab-f14-x86_64 noarch 5.2-6.2016.01.18 myplc 4.6 M Installing for dependencies: Django noarch 1.3.1-2.fc14 updates 3.6 M PyGreSQL x86_64 3.8.1-3.fc14 fedora 63 k PyXML x86_64 0.8.4-25.fc14 fedora 894 k SOAPpy noarch 0.11.6-12.fc14 updates 207 k apr x86_64 1.4.5-1.fc14 updates 97 k apr-util x86_64 1.3.12-1.fc14 updates 81 k apr-util-ldap x86_64 1.3.12-1.fc14 updates 16 k at x86_64 3.1.12-6.fc14 updates 61 k bc x86_64 1.06.95-2.fc14 updates 109 k binutils x86_64 2.20.51.0.7-8.fc14 updates 3.5 M bootcd-initscripts noarch 5.3-3.2016.01.18 myplc 11 k bootcd-onelab-f14-x86_64 noarch 5.3-3.2016.01.18 myplc 99 M bootmanager x86_64 5.3-4.onelab myplc 150 k bzip2 x86_64 1.0.6-1.fc14.1 fedora 49 k createrepo noarch 0.9.8-5.fc14 fedora 81 k cronie x86_64 1.4.8-2.fc14 updates 76 k cronie-anacron x86_64 1.4.8-2.fc14 updates 29 k crontabs noarch 1.11-1.20101115git.fc14 updates 11 k cyrus-sasl x86_64 2.1.23-12.fc14 fedora 77 k deltarpm x86_64 3.6-0.6.20110223git.fc14 updates 76 k distcache x86_64 1.4.5-21 fedora 109 k dnsmasq x86_64 2.52-1.fc13 fedora 153 k dosfstools x86_64 3.0.9-6.fc14 updates 77 k drupal noarch 4.7-15.onelab.2016.01.18 myplc 511 k ed x86_64 1.4-2.fc14 fedora 73 k expect x86_64 5.44.1.15-2.fc14 updates 256 k fedora-logos noarch 14.0.2-1.fc14 updates 1.4 M genisoimage x86_64 1.1.11-3.fc14 updates 353 k gettext x86_64 0.18.1.1-5.fc14 updates 1.1 M gettext-libs x86_64 0.18.1.1-5.fc14 updates 629 k gnupg x86_64 1.4.11-2.fc14 updates 1.4 M groff x86_64 1.20.1-3.fc14 updates 2.0 M hesiod x86_64 3.1.0-19.fc14 fedora 20 k httpd x86_64 2.2.17-1.fc14 updates 812 k httpd-tools x86_64 2.2.17-1.fc14 updates 67 k ipmitool x86_64 1.8.11-5.fc14 fedora 307 k libXpm x86_64 3.5.8-2.fc13 fedora 59 k libdb x86_64 5.0.26-2.fc14 fedora 611 k libevent x86_64 1.4.14b-1.fc14 fedora 67 k libgomp x86_64 4.5.1-4.fc14 fedora 72 k libjpeg-turbo x86_64 1.1.1-1.fc14 updates 120 k libtool-ltdl x86_64 2.2.10-3.fc14 fedora 44 k libxml2-python x86_64 2.7.7-3.fc14 updates 315 k libxslt x86_64 1.1.26-3.fc14 fedora 450 k m2crypto x86_64 0.20.2-9.fc14 fedora 464 k m4 x86_64 1.4.14-1.fc14 fedora 280 k mailcap noarch 2.1.35-1.fc14 updates 28 k mailx x86_64 12.5-1.fc14 updates 235 k make x86_64 1:3.82-3.fc14 updates 414 k man-db x86_64 2.5.7-9.fc14 updates 672 k memcached x86_64 1.4.5-3.fc14 fedora 70 k mod_python x86_64 3.3.1-14.fc14 updates 292 k mod_ssl x86_64 1:2.2.17-1.fc14 updates 85 k mtools x86_64 4.0.13-2.fc14 fedora 193 k myplc-config noarch 5.3-3.onelab myplc 55 k myplc-docs noarch 5.3-3.onelab myplc 896 k myplc-release noarch 5.3-3.onelab.2016.01.18 myplc 16 k nodeconfig x86_64 5.2-5.onelab myplc 40 k nodeimage-onelab-f14-x86_64 noarch 5.2-6.2016.01.18 myplc 248 M nodeyum noarch 5.2-6.2016.01.18 myplc 28 k patch x86_64 2.6.1-8.fc14 updates 91 k pax x86_64 3.4-10.fc12 fedora 67 k pciutils x86_64 3.1.7-3.fc14 updates 84 k pciutils-libs x86_64 3.1.7-3.fc14 updates 41 k pcucontrol x86_64 1.0-13.onelab myplc 2.4 M perl-Crypt-PasswdMD5 noarch 1.3-7.fc14 fedora 11 k perl-Digest-SHA1 x86_64 2.12-4.fc14 fedora 49 k perl-IO-Socket-SSL noarch 1.38-1.fc14 updates 71 k perl-Net-LibIDN x86_64 0.12-4.fc14 fedora 35 k perl-Net-SSLeay x86_64 1.36-2.fc14 fedora 173 k php x86_64 5.3.8-3.fc14 updates 1.1 M php-cli x86_64 5.3.8-3.fc14 updates 2.2 M php-common x86_64 5.3.8-3.fc14 updates 537 k php-gd x86_64 5.3.8-3.fc14 updates 106 k php-mbstring x86_64 5.3.8-3.fc14 updates 456 k php-pdo x86_64 5.3.8-3.fc14 updates 77 k php-pgsql x86_64 5.3.8-3.fc14 updates 67 k plcapi x86_64 5.3-9.onelab myplc 548 k plewww noarch 5.2-6 myplc 237 k plewww-plekit noarch 5.2-6 myplc 268 k postgresql x86_64 8.4.9-1.fc14 updates 2.7 M postgresql-libs x86_64 8.4.9-1.fc14 updates 198 k postgresql-server x86_64 8.4.9-1.fc14 updates 3.3 M procmail x86_64 3.22-25.fc12 fedora 156 k pyOpenSSL x86_64 0.9-3.fc14 updates 173 k pyaspects x86_64 0.4.1-3.onelab myplc 11 k pypcilib x86_64 0.2-11.onelab myplc 7.9 k pyplnet noarch 4.3-18.onelab myplc 23 k pyserial noarch 2.5-1.fc14 updates 105 k python-deltarpm x86_64 3.6-0.6.20110223git.fc14 updates 29 k python-devel x86_64 2.7-8.fc14.1 fedora 376 k python-fpconst noarch 0.7.3-7.fc14 fedora 16 k python-ldap x86_64 2.3.10-2.fc14 fedora 126 k python-lxml x86_64 2.2.8-1.fc14 fedora 654 k python-memcached noarch 1.47-1.fc14 updates 31 k python-psycopg2 x86_64 2.2.2-2.fc14 fedora 105 k python-simplejson x86_64 2.1.6-1.fc14.1 updates 126 k python-twisted-core x86_64 10.1.0-3.fc14 fedora 2.2 M python-twisted-web x86_64 10.1.0-1.fc14 fedora 639 k python-twisted-words x86_64 10.1.0-2.fc14 fedora 465 k python-zope-interface x86_64 3.6.1-7.fc14 fedora 119 k redhat-lsb x86_64 4.0-5.fc14 fedora 25 k rsync x86_64 3.0.8-2.fc14 updates 341 k sendmail x86_64 8.14.4-10.fc14 updates 717 k sendmail-cf noarch 8.14.4-10.fc14 updates 184 k sharutils x86_64 4.10-1.fc14 fedora 174 k syslinux x86_64 4.02-3.fc14 fedora 855 k syslinux-perl x86_64 4.02-3.fc14 fedora 28 k t1lib x86_64 5.1.2-6.fc14 fedora 160 k tar x86_64 2:1.23-9.fc14 updates 814 k tcl x86_64 1:8.5.9-2.fc14 updates 1.9 M time x86_64 1.7-38.fc14 updates 26 k wget x86_64 1.12-4.fc14 updates 482 k www-register-wizard noarch 4.3-5.onelab myplc 328 k xmlsec1 x86_64 1.2.16-3.fc14 updates 167 k xmlsec1-openssl x86_64 1.2.16-3.fc14 updates 68 k Transaction Summary ================================================================================ Install 119 Package(s) Total download size: 561 M Installed size: 730 M Downloading Packages: -------------------------------------------------------------------------------- Total 60 MB/s | 561 MB 00:09 Running rpm_check_debug Running Transaction Test Transaction Test Succeeded Running Transaction Installing : php-common-5.3.8-3.fc14.x86_64 1/119 Installing : postgresql-libs-8.4.9-1.fc14.x86_64 2/119 Installing : 2:tar-1.23-9.fc14.x86_64 3/119 Installing : postgresql-8.4.9-1.fc14.x86_64 4/119 Installing : apr-1.4.5-1.fc14.x86_64 5/119 Installing : apr-util-1.3.12-1.fc14.x86_64 6/119 Installing : libxslt-1.1.26-3.fc14.x86_64 7/119 Installing : bzip2-1.0.6-1.fc14.1.x86_64 8/119 Installing : ed-1.4-2.fc14.x86_64 9/119 Installing : deltarpm-3.6-0.6.20110223git.fc14.x86_64 10/119 Installing : sharutils-4.10-1.fc14.x86_64 11/119 Installing : wget-1.12-4.fc14.x86_64 12/119 Installing : gnupg-1.4.11-2.fc14.x86_64 13/119 Installing : m4-1.4.14-1.fc14.x86_64 14/119 Installing : mtools-4.0.13-2.fc14.x86_64 15/119 Installing : syslinux-4.02-3.fc14.x86_64 16/119 Installing : python-deltarpm-3.6-0.6.20110223git.fc14.x86_64 17/119 Installing : python-lxml-2.2.8-1.fc14.x86_64 18/119 Installing : httpd-tools-2.2.17-1.fc14.x86_64 19/119 Installing : apr-util-ldap-1.3.12-1.fc14.x86_64 20/119 Installing : postgresql-server-8.4.9-1.fc14.x86_64 21/119 Installing : python-psycopg2-2.2.2-2.fc14.x86_64 22/119 Installing : PyGreSQL-3.8.1-3.fc14.x86_64 23/119 Installing : php-cli-5.3.8-3.fc14.x86_64 24/119 Installing : php-pdo-5.3.8-3.fc14.x86_64 25/119 Installing : php-pgsql-5.3.8-3.fc14.x86_64 26/119 Installing : php-mbstring-5.3.8-3.fc14.x86_64 27/119 Installing : crontabs-1.11-1.20101115git.fc14.noarch 28/119 Installing : cronie-1.4.8-2.fc14.x86_64 29/119 Installing : cronie-anacron-1.4.8-2.fc14.x86_64 30/119 Installing : PyXML-0.8.4-25.fc14.x86_64 31/119 Installing : perl-Digest-SHA1-2.12-4.fc14.x86_64 32/119 Installing : libgomp-4.5.1-4.fc14.x86_64 33/119 Installing : t1lib-5.1.2-6.fc14.x86_64 34/119 Installing : libxml2-python-2.7.7-3.fc14.x86_64 35/119 Installing : hesiod-3.1.0-19.fc14.x86_64 36/119 Installing : pyOpenSSL-0.9-3.fc14.x86_64 37/119 Installing : pciutils-libs-3.1.7-3.fc14.x86_64 38/119 Installing : pciutils-3.1.7-3.fc14.x86_64 39/119 Installing : dosfstools-3.0.9-6.fc14.x86_64 40/119 Installing : at-3.1.12-6.fc14.x86_64 41/119 Installing : mailx-12.5-1.fc14.x86_64 42/119 Installing : libjpeg-turbo-1.1.1-1.fc14.x86_64 43/119 Installing : distcache-1.4.5-21.x86_64 44/119 Installing : perl-Net-LibIDN-0.12-4.fc14.x86_64 45/119 Installing : ipmitool-1.8.11-5.fc14.x86_64 46/119 Installing : genisoimage-1.1.11-3.fc14.x86_64 47/119 Installing : 1:tcl-8.5.9-2.fc14.x86_64 48/119 Installing : expect-5.44.1.15-2.fc14.x86_64 49/119 Installing : binutils-2.20.51.0.7-8.fc14.x86_64 50/119 Installing : time-1.7-38.fc14.x86_64 51/119 Installing : cyrus-sasl-2.1.23-12.fc14.x86_64 52/119 Installing : libtool-ltdl-2.2.10-3.fc14.x86_64 53/119 Installing : xmlsec1-1.2.16-3.fc14.x86_64 54/119 Installing : xmlsec1-openssl-1.2.16-3.fc14.x86_64 55/119 Installing : procmail-3.22-25.fc12.x86_64 56/119 Installing : rsync-3.0.8-2.fc14.x86_64 57/119 Installing : dnsmasq-2.52-1.fc13.x86_64 58/119 Installing : libXpm-3.5.8-2.fc13.x86_64 59/119 Installing : php-gd-5.3.8-3.fc14.x86_64 60/119 Installing : 1:make-3.82-3.fc14.x86_64 61/119 Installing : python-ldap-2.3.10-2.fc14.x86_64 62/119 Installing : patch-2.6.1-8.fc14.x86_64 63/119 Installing : gettext-libs-0.18.1.1-5.fc14.x86_64 64/119 Installing : gettext-0.18.1.1-5.fc14.x86_64 65/119 Installing : pax-3.4-10.fc12.x86_64 66/119 Installing : libevent-1.4.14b-1.fc14.x86_64 67/119 Installing : memcached-1.4.5-3.fc14.x86_64 68/119 Installing : groff-1.20.1-3.fc14.x86_64 69/119 Installing : man-db-2.5.7-9.fc14.x86_64 70/119 Installing : bc-1.06.95-2.fc14.x86_64 71/119 Installing : libdb-5.0.26-2.fc14.x86_64 72/119 Installing : sendmail-8.14.4-10.fc14.x86_64 73/119 Installing : pyplnet-4.3-18.onelab.noarch 74/119 Installing : python-simplejson-2.1.6-1.fc14.1.x86_64 75/119 Installing : Django-1.3.1-2.fc14.noarch 76/119 Installing : redhat-lsb-4.0-5.fc14.x86_64 77/119 Installing : sendmail-cf-8.14.4-10.fc14.noarch 78/119 Installing : pypcilib-0.2-11.onelab.x86_64 79/119 Installing : createrepo-0.9.8-5.fc14.noarch 80/119 Installing : nodeimage-onelab-f14-x86_64-5.2-6.2016.01.18.noarc 81/119 Installing : m2crypto-0.20.2-9.fc14.x86_64 82/119 Installing : myplc-config-5.3-3.onelab.noarch 83/119 Installing : mailcap-2.1.35-1.fc14.noarch 84/119 Installing : perl-Net-SSLeay-1.36-2.fc14.x86_64 85/119 Installing : perl-IO-Socket-SSL-1.38-1.fc14.noarch 86/119 Installing : pcucontrol-1.0-13.onelab.x86_64 87/119 Installing : pyserial-2.5-1.fc14.noarch 88/119 Installing : fedora-logos-14.0.2-1.fc14.noarch 89/119 Installing : httpd-2.2.17-1.fc14.x86_64 90/119 Installing : php-5.3.8-3.fc14.x86_64 91/119 Installing : mod_python-3.3.1-14.fc14.x86_64 92/119 Installing : 1:mod_ssl-2.2.17-1.fc14.x86_64 93/119 Installing : drupal-4.7-15.onelab.2016.01.18.noarch 94/119 Installing : pyaspects-0.4.1-3.onelab.x86_64 95/119 Installing : python-devel-2.7-8.fc14.1.x86_64 96/119 Installing : myplc-release-5.3-3.onelab.2016.01.18.noarch 97/119 Installing : perl-Crypt-PasswdMD5-1.3-7.fc14.noarch 98/119 Installing : syslinux-perl-4.02-3.fc14.x86_64 99/119 Installing : bootcd-onelab-f14-x86_64-5.3-3.2016.01.18.noarch 100/119 Installing : python-fpconst-0.7.3-7.fc14.noarch 101/119 Installing : SOAPpy-0.11.6-12.fc14.noarch 102/119 Installing : plewww-plekit-5.2-6.noarch 103/119 Installing : python-memcached-1.47-1.fc14.noarch 104/119 Installing : nodeyum-5.2-6.2016.01.18.noarch 105/119 Installing : python-zope-interface-3.6.1-7.fc14.x86_64 106/119 Installing : python-twisted-core-10.1.0-3.fc14.x86_64 107/119 Installing : python-twisted-web-10.1.0-1.fc14.x86_64 108/119 Installing : python-twisted-words-10.1.0-2.fc14.x86_64 109/119 Installing : plcapi-5.3-9.onelab.x86_64 110/119 Installing : plewww-5.2-6.noarch 111/119 /var/www/html/sites/default / / /var/www/html/database / / /var/www/html/modules / / Installing : www-register-wizard-4.3-5.onelab.noarch 112/119 Installing : nodeconfig-5.2-5.onelab.x86_64 113/119 Installing : bootmanager-5.3-4.onelab.x86_64 114/119 Installing : myplc-docs-5.3-3.onelab.noarch 115/119 Installing : bootcd-initscripts-5.3-3.2016.01.18.noarch 116/119 Installing : myplc-5.3-3.onelab.noarch 117/119 Preserving /var/lib/pgsql/data Preserving /etc/planetlab Installing : noderepo-onelab-f14-x86_64-5.2-6.2016.01.18.noarch 118/119 Failed to get D-Bus connection: Failed to connect to socket /org/freedesktop/systemd1/private: Connection refused PLC is not running. Skipping a restart ... Installing : slicerepo-onelab-f14-x86_64-5.2-6.2016.01.18.noarc 119/119 Failed to get D-Bus connection: Failed to connect to socket /org/freedesktop/systemd1/private: Connection refused The PLC is not running. Skipping a restart ... Installed: myplc.noarch 0:5.3-3.onelab noderepo-onelab-f14-x86_64.noarch 0:5.2-6.2016.01.18 slicerepo-onelab-f14-x86_64.noarch 0:5.2-6.2016.01.18 Dependency Installed: Django.noarch 0:1.3.1-2.fc14 PyGreSQL.x86_64 0:3.8.1-3.fc14 PyXML.x86_64 0:0.8.4-25.fc14 SOAPpy.noarch 0:0.11.6-12.fc14 apr.x86_64 0:1.4.5-1.fc14 apr-util.x86_64 0:1.3.12-1.fc14 apr-util-ldap.x86_64 0:1.3.12-1.fc14 at.x86_64 0:3.1.12-6.fc14 bc.x86_64 0:1.06.95-2.fc14 binutils.x86_64 0:2.20.51.0.7-8.fc14 bootcd-initscripts.noarch 0:5.3-3.2016.01.18 bootcd-onelab-f14-x86_64.noarch 0:5.3-3.2016.01.18 bootmanager.x86_64 0:5.3-4.onelab bzip2.x86_64 0:1.0.6-1.fc14.1 createrepo.noarch 0:0.9.8-5.fc14 cronie.x86_64 0:1.4.8-2.fc14 cronie-anacron.x86_64 0:1.4.8-2.fc14 crontabs.noarch 0:1.11-1.20101115git.fc14 cyrus-sasl.x86_64 0:2.1.23-12.fc14 deltarpm.x86_64 0:3.6-0.6.20110223git.fc14 distcache.x86_64 0:1.4.5-21 dnsmasq.x86_64 0:2.52-1.fc13 dosfstools.x86_64 0:3.0.9-6.fc14 drupal.noarch 0:4.7-15.onelab.2016.01.18 ed.x86_64 0:1.4-2.fc14 expect.x86_64 0:5.44.1.15-2.fc14 fedora-logos.noarch 0:14.0.2-1.fc14 genisoimage.x86_64 0:1.1.11-3.fc14 gettext.x86_64 0:0.18.1.1-5.fc14 gettext-libs.x86_64 0:0.18.1.1-5.fc14 gnupg.x86_64 0:1.4.11-2.fc14 groff.x86_64 0:1.20.1-3.fc14 hesiod.x86_64 0:3.1.0-19.fc14 httpd.x86_64 0:2.2.17-1.fc14 httpd-tools.x86_64 0:2.2.17-1.fc14 ipmitool.x86_64 0:1.8.11-5.fc14 libXpm.x86_64 0:3.5.8-2.fc13 libdb.x86_64 0:5.0.26-2.fc14 libevent.x86_64 0:1.4.14b-1.fc14 libgomp.x86_64 0:4.5.1-4.fc14 libjpeg-turbo.x86_64 0:1.1.1-1.fc14 libtool-ltdl.x86_64 0:2.2.10-3.fc14 libxml2-python.x86_64 0:2.7.7-3.fc14 libxslt.x86_64 0:1.1.26-3.fc14 m2crypto.x86_64 0:0.20.2-9.fc14 m4.x86_64 0:1.4.14-1.fc14 mailcap.noarch 0:2.1.35-1.fc14 mailx.x86_64 0:12.5-1.fc14 make.x86_64 1:3.82-3.fc14 man-db.x86_64 0:2.5.7-9.fc14 memcached.x86_64 0:1.4.5-3.fc14 mod_python.x86_64 0:3.3.1-14.fc14 mod_ssl.x86_64 1:2.2.17-1.fc14 mtools.x86_64 0:4.0.13-2.fc14 myplc-config.noarch 0:5.3-3.onelab myplc-docs.noarch 0:5.3-3.onelab myplc-release.noarch 0:5.3-3.onelab.2016.01.18 nodeconfig.x86_64 0:5.2-5.onelab nodeimage-onelab-f14-x86_64.noarch 0:5.2-6.2016.01.18 nodeyum.noarch 0:5.2-6.2016.01.18 patch.x86_64 0:2.6.1-8.fc14 pax.x86_64 0:3.4-10.fc12 pciutils.x86_64 0:3.1.7-3.fc14 pciutils-libs.x86_64 0:3.1.7-3.fc14 pcucontrol.x86_64 0:1.0-13.onelab perl-Crypt-PasswdMD5.noarch 0:1.3-7.fc14 perl-Digest-SHA1.x86_64 0:2.12-4.fc14 perl-IO-Socket-SSL.noarch 0:1.38-1.fc14 perl-Net-LibIDN.x86_64 0:0.12-4.fc14 perl-Net-SSLeay.x86_64 0:1.36-2.fc14 php.x86_64 0:5.3.8-3.fc14 php-cli.x86_64 0:5.3.8-3.fc14 php-common.x86_64 0:5.3.8-3.fc14 php-gd.x86_64 0:5.3.8-3.fc14 php-mbstring.x86_64 0:5.3.8-3.fc14 php-pdo.x86_64 0:5.3.8-3.fc14 php-pgsql.x86_64 0:5.3.8-3.fc14 plcapi.x86_64 0:5.3-9.onelab plewww.noarch 0:5.2-6 plewww-plekit.noarch 0:5.2-6 postgresql.x86_64 0:8.4.9-1.fc14 postgresql-libs.x86_64 0:8.4.9-1.fc14 postgresql-server.x86_64 0:8.4.9-1.fc14 procmail.x86_64 0:3.22-25.fc12 pyOpenSSL.x86_64 0:0.9-3.fc14 pyaspects.x86_64 0:0.4.1-3.onelab pypcilib.x86_64 0:0.2-11.onelab pyplnet.noarch 0:4.3-18.onelab pyserial.noarch 0:2.5-1.fc14 python-deltarpm.x86_64 0:3.6-0.6.20110223git.fc14 python-devel.x86_64 0:2.7-8.fc14.1 python-fpconst.noarch 0:0.7.3-7.fc14 python-ldap.x86_64 0:2.3.10-2.fc14 python-lxml.x86_64 0:2.2.8-1.fc14 python-memcached.noarch 0:1.47-1.fc14 python-psycopg2.x86_64 0:2.2.2-2.fc14 python-simplejson.x86_64 0:2.1.6-1.fc14.1 python-twisted-core.x86_64 0:10.1.0-3.fc14 python-twisted-web.x86_64 0:10.1.0-1.fc14 python-twisted-words.x86_64 0:10.1.0-2.fc14 python-zope-interface.x86_64 0:3.6.1-7.fc14 redhat-lsb.x86_64 0:4.0-5.fc14 rsync.x86_64 0:3.0.8-2.fc14 sendmail.x86_64 0:8.14.4-10.fc14 sendmail-cf.noarch 0:8.14.4-10.fc14 sharutils.x86_64 0:4.10-1.fc14 syslinux.x86_64 0:4.02-3.fc14 syslinux-perl.x86_64 0:4.02-3.fc14 t1lib.x86_64 0:5.1.2-6.fc14 tar.x86_64 2:1.23-9.fc14 tcl.x86_64 1:8.5.9-2.fc14 time.x86_64 0:1.7-38.fc14 wget.x86_64 0:1.12-4.fc14 www-register-wizard.noarch 0:4.3-5.onelab xmlsec1.x86_64 0:1.2.16-3.fc14 xmlsec1-openssl.x86_64 0:1.2.16-3.fc14 Complete! -> 12:08:10 -- + ssh -n -o BatchMode=yes -o StrictHostKeyChecking=no -o CheckHostIP=no -o ConnectTimeout=5 -o UserKnownHostsFile=/dev/null buzzcocks ssh -o BatchMode=yes -o StrictHostKeyChecking=no -o CheckHostIP=no -o ConnectTimeout=5 -o UserKnownHostsFile=/dev/null vplc02 yum-complete-transaction -y Warning: Permanently added 'buzzcocks' (ECDSA) to the list of known hosts. Warning: Permanently added 'vplc02' (RSA) to the list of known hosts. Failed to set locale, defaulting to C No unfinished transactions left. -> 12:08:11 -- + ssh -n -o BatchMode=yes -o StrictHostKeyChecking=no -o CheckHostIP=no -o ConnectTimeout=5 -o UserKnownHostsFile=/dev/null buzzcocks ssh -o BatchMode=yes -o StrictHostKeyChecking=no -o CheckHostIP=no -o ConnectTimeout=5 -o UserKnownHostsFile=/dev/null vplc02 rpm -q slicerepo-onelab-f14-x86_64 myplc noderepo-onelab-f14-x86_64 Warning: Permanently added 'buzzcocks' (ECDSA) to the list of known hosts. Warning: Permanently added 'vplc02' (RSA) to the list of known hosts. slicerepo-onelab-f14-x86_64-5.2-6.2016.01.18.noarch myplc-5.3-3.onelab.noarch noderepo-onelab-f14-x86_64-5.2-6.2016.01.18.noarch * 12:08:11 -- ********** 1 SUCCESSFUL step plc_install on plctest1_vplc02 TRACE: 1 12-07-31->40s=0:00:40.501859s status=OK step=plc_install plc=plctest1_vplc02 force=False * 12:08:11 -- ********** 1 RUNNING step plc_configure on plc plctest1_vplc02 -> 12:08:11 -- + cat plctest1_vplc02.2016.01.18--f14-n3-1-vplc02.plc-config-tty e PLC_HRN_ROOT a e PLC_RESERVATION_GRANULARITY 1800 e PLC_ROOT_USER root@test.onelab.eu e PLC_BOOT_HOST vplc02.pl.sophia.inria.fr e PLC_OMF_XMPP_SERVER deferred-myplc-hostname e PLC_SHORTNAME Rlab e PLC_NET_DNS2 138.96.112.2 e PLC_MAIL_ENABLED false e PLC_DB_HOST vplc02.pl.sophia.inria.fr e PLC_NET_DNS1 138.96.112.1 e PLC_VSYS_DEFAULTS , vif_up, vif_down, fd_tuntap, promisc, e PLC_API_HOST vplc02.pl.sophia.inria.fr e PLC_NAME Regression TestLab e PLC_ROOT_PASSWORD test++ e PLC_SLICE_PREFIX auto e PLC_OMF_ENABLED true e PLC_MAIL_SUPPORT_ADDRESS thierry.parmentelat@inria.fr e PLC_WWW_HOST vplc02.pl.sophia.inria.fr w q -> 12:08:11 -- + cat plctest1_vplc02.2016.01.18--f14-n3-1-vplc02.plc-config-tty + ssh -o BatchMode=yes -o StrictHostKeyChecking=no -o CheckHostIP=no -o ConnectTimeout=5 -o UserKnownHostsFile=/dev/null buzzcocks ssh -o BatchMode=yes -o StrictHostKeyChecking=no -o CheckHostIP=no -o ConnectTimeout=5 -o UserKnownHostsFile=/dev/null vplc02 plc-config-tty Warning: Permanently added 'buzzcocks' (ECDSA) to the list of known hosts. Warning: Permanently added 'vplc02' (RSA) to the list of known hosts. Created directory /etc/planetlab/configs Enter command (u for usual changes, w to save, ? for help) == PLC_HRN_ROOT : [planetlab.test] Enter command (u for usual changes, w to save, ? for help) == PLC_RESERVATION_GRANULARITY : [3600] Enter command (u for usual changes, w to save, ? for help) == PLC_ROOT_USER : [root@localhost.localdomain] Enter command (u for usual changes, w to save, ? for help) == PLC_BOOT_HOST : [localhost.localdomain] Enter command (u for usual changes, w to save, ? for help) == PLC_OMF_XMPP_SERVER : [localhost.localdomain] Enter command (u for usual changes, w to save, ? for help) == PLC_SHORTNAME : [Tlab] Enter command (u for usual changes, w to save, ? for help) == PLC_NET_DNS2 : [None] Enter command (u for usual changes, w to save, ? for help) == PLC_MAIL_ENABLED : [false] Enter command (u for usual changes, w to save, ? for help) == PLC_DB_HOST : [localhost.localdomain] Enter command (u for usual changes, w to save, ? for help) == PLC_NET_DNS1 : [127.0.0.1] Enter command (u for usual changes, w to save, ? for help) == PLC_VSYS_DEFAULTS : [ ] Enter command (u for usual changes, w to save, ? for help) == PLC_API_HOST : [localhost.localdomain] Enter command (u for usual changes, w to save, ? for help) == PLC_NAME : [PlanetLab Test] Enter command (u for usual changes, w to save, ? for help) == PLC_ROOT_PASSWORD : [root] Enter command (u for usual changes, w to save, ? for help) == PLC_SLICE_PREFIX : [pl] Enter command (u for usual changes, w to save, ? for help) == PLC_OMF_ENABLED : [false] Enter command (u for usual changes, w to save, ? for help) == PLC_MAIL_SUPPORT_ADDRESS : [root+support@localhost.localdomain] Enter command (u for usual changes, w to save, ? for help) == PLC_WWW_HOST : [localhost.localdomain] Enter command (u for usual changes, w to save, ? for help) Wrote /etc/planetlab/configs/site.xml Merged /etc/planetlab/default_config.xml and /etc/planetlab/configs/site.xml into /etc/planetlab/plc_config.xml You might want to type 'r' (restart plc), 'R' (reload plc) or 'q' (quit) Enter command (u for usual changes, w to save, ? for help) -> 12:08:12 -- + rm plctest1_vplc02.2016.01.18--f14-n3-1-vplc02.plc-config-tty * 12:08:12 -- ********** 1 SUCCESSFUL step plc_configure on plctest1_vplc02 TRACE: 1 12-08-11->0s=0:00:00.716037s status=OK step=plc_configure plc=plctest1_vplc02 force=False * 12:08:12 -- ********** 1 RUNNING step plc_start on plc plctest1_vplc02 -> 12:08:12 -- + ssh -n -o BatchMode=yes -o StrictHostKeyChecking=no -o CheckHostIP=no -o ConnectTimeout=5 -o UserKnownHostsFile=/dev/null buzzcocks ssh -o BatchMode=yes -o StrictHostKeyChecking=no -o CheckHostIP=no -o ConnectTimeout=5 -o UserKnownHostsFile=/dev/null vplc02 sed -i -e '\"s,env' '-i,env,\"' /sbin/service Warning: Permanently added 'buzzcocks' (ECDSA) to the list of known hosts. Warning: Permanently added 'vplc02' (RSA) to the list of known hosts. -> 12:08:12 -- + ssh -n -o BatchMode=yes -o StrictHostKeyChecking=no -o CheckHostIP=no -o ConnectTimeout=5 -o UserKnownHostsFile=/dev/null buzzcocks ssh -o BatchMode=yes -o StrictHostKeyChecking=no -o CheckHostIP=no -o ConnectTimeout=5 -o UserKnownHostsFile=/dev/null vplc02 SYSTEMCTL_SKIP_REDIRECT=true service plc start Warning: Permanently added 'buzzcocks' (ECDSA) to the list of known hosts. Warning: Permanently added 'vplc02' (RSA) to the list of known hosts. PLC: Generating network files: [ OK ] PLC: Generating SSL certificates for: PLC: WWW: PLC: API: PLC: BOOT: [ OK ] PLC: Generating GPG keys: [ OK ] PLC: Generating SSH keys: [ OK ] PLC: Starting web server: PLC: Setting PHP timezone to GMT: [ OK ] PLC: Starting PostgreSQL server: [ OK ] PLC: Configuring the API: [ OK ] PLC: Bootstrapping the database: PLC: - 101-up-leases.sql (dbdumped): PLC: - 102-up-isvalid.sql (dbdumped): PLC: - 103-up-extensions.sql (dbdumped): PLC: - 104-up-noderole.sql (dbdumped): PLC: - 105-up-timespent.sql (dbdumped): [ OK ] PLC: Starting DNS server: PLC: Configuring resolv.conf: [ OK ] PLC: Creating BootCD variants: [ OK ] PLC: Rebuilding Boot CD: [ OK ] [ OK ] PLC: Signing and indexing node packages: [ OK ] * 12:08:55 -- ********** 1 SUCCESSFUL step plc_start on plctest1_vplc02 TRACE: 1 12-08-12->43s=0:00:43.243834s status=OK step=plc_start plc=plctest1_vplc02 force=False * 12:08:55 -- ********** 1 RUNNING step keys_fetch on plc plctest1_vplc02 -> 12:08:55 -- + scp -o BatchMode=yes -o StrictHostKeyChecking=no -o CheckHostIP=no -o ConnectTimeout=5 buzzcocks:/vservers/2016.01.18--f14-n3-1-vplc02//etc/planetlab/debug_ssh_key.pub keys/2016.01.18--f14-n3-1-vplc02-debug.pub -> 12:08:55 -- + scp -o BatchMode=yes -o StrictHostKeyChecking=no -o CheckHostIP=no -o ConnectTimeout=5 buzzcocks:/vservers/2016.01.18--f14-n3-1-vplc02//etc/planetlab/debug_ssh_key.rsa keys/2016.01.18--f14-n3-1-vplc02-debug.rsa * 12:08:56 -- ********** 1 SUCCESSFUL step keys_fetch on plctest1_vplc02 TRACE: 1 12-08-55->0s=0:00:00.535294s status=OK step=keys_fetch plc=plctest1_vplc02 force=False * 12:08:56 -- ********** 1 RUNNING step keys_store on plc plctest1_vplc02 * 12:08:56 -- Storing key key_pi in keys/key_pi.pub * 12:08:56 -- Storing key key_sfapi in keys/key_sfapi.pub * 12:08:56 -- Storing key key_user in keys/key_user.pub * 12:08:56 -- Storing key key_sfauser in keys/key_sfauser.pub * 12:08:56 -- Storing key key_admin in keys/key_admin.pub * 12:08:56 -- ********** 1 SUCCESSFUL step keys_store on plctest1_vplc02 TRACE: 1 12-08-56->0s=0:00:00.008730s status=OK step=keys_store plc=plctest1_vplc02 force=False * 12:08:56 -- ********** 1 RUNNING step keys_clear_known_hosts on plc plctest1_vplc02 * 12:08:56 -- Clearing entry for vnode02.pl.sophia.inria.fr in /root/.ssh/known_hosts -> 12:08:56 -- + sed -i -e '/^vnode02.pl.sophia.inria.fr/d' /root/.ssh/known_hosts * 12:08:56 -- ********** 1 SUCCESSFUL step keys_clear_known_hosts on plctest1_vplc02 TRACE: 1 12-08-56->0s=0:00:00.009590s status=OK step=keys_clear_known_hosts plc=plctest1_vplc02 force=False * 12:08:56 -- ********** 1 RUNNING step plcapi_urls on plc plctest1_vplc02 ... (http error 302) http://vplc02.pl.sophia.inria.fr/PLCAPI ... (http error 302) http://vplc02.pl.sophia.inria.fr/PLCAPI/ ... (http error 302) http://vplc02.pl.sophia.inria.fr:80/PLCAPI ... (http error 302) http://vplc02.pl.sophia.inria.fr:80/PLCAPI/ ... (http error 302) http://138.96.112.72/PLCAPI ... (http error 302) http://138.96.112.72/PLCAPI/ ... (http error 302) http://138.96.112.72:80/PLCAPI ... (http error 302) http://138.96.112.72:80/PLCAPI/ ... (http error 301) https://vplc02.pl.sophia.inria.fr/PLCAPI YES https://vplc02.pl.sophia.inria.fr/PLCAPI/ ... (http error 301) https://vplc02.pl.sophia.inria.fr:443/PLCAPI YES https://vplc02.pl.sophia.inria.fr:443/PLCAPI/ ... (http error 301) https://138.96.112.72/PLCAPI YES https://138.96.112.72/PLCAPI/ ... (http error 301) https://138.96.112.72:443/PLCAPI YES https://138.96.112.72:443/PLCAPI/ * 12:08:56 -- ********** 1 SUCCESSFUL step plcapi_urls on plctest1_vplc02 TRACE: 1 12-08-56->0s=0:00:00.763175s status=OK step=plcapi_urls plc=plctest1_vplc02 force=False * 12:08:56 -- ********** 1 RUNNING step speed_up_slices on plc plctest1_vplc02 -> 12:08:56 -- + scp -o BatchMode=yes -o StrictHostKeyChecking=no -o CheckHostIP=no -o ConnectTimeout=5 plctest1_vplc02.2016.01.18--f14-n3-1-vplc02.nodemanager buzzcocks:/vservers/2016.01.18--f14-n3-1-vplc02///var/www/html/PlanetLabConf/nodemanager * 12:08:57 -- ********** 1 SUCCESSFUL step speed_up_slices on plctest1_vplc02 TRACE: 1 12-08-56->0s=0:00:00.609177s status=OK step=speed_up_slices plc=plctest1_vplc02 force=False * 12:08:57 -- ********** 1 RUNNING step initscripts on plc plctest1_vplc02 > 12:08:57 -- Adding Initscript in plc plctest1_vplc02 { 'initscript_fields': { 'enabled': True, 'name': 'initscript_by_name', 'script': '#!/bin/bash\n' 'command=$1; shift\n' 'slicename=$1; shift\n' 'stamp="initscript_by_name"\n' 'stampfile=/var/tmp/$stamp.stamp\n' 'date=$(date)\n' '\n' 'echo $date "Running ' 'initscript with ' 'command=$command and ' 'slicename=$slicename"\n' '\n' 'function start () {\n' ' (echo $date Starting test ' 'initscript: $stamp on ' 'slicename $slicename ; ' 'date) >> $stampfile\n' ' echo $date "This is the ' 'stdout of the sliver ' '$slicename initscript ' '$command (exp. start) ' 'pid=$$"\n' ' echo $date "This is the ' 'stderr of the sliver ' '$slicename initscript ' '$command (exp. start) ' 'pid=$$" 1>&2\n' '}\n' 'function stop () {\n' ' echo $date "Removing ' 'stamp $stampfile"\n' ' rm -f $stampfile\n' '}\n' 'function restart () {\n' ' stop\n' ' start\n' '}\n' 'case $command in \n' 'start) start ;;\n' 'stop) stop ;;\n' 'restart) restart ;;\n' '*) echo "Unknown command in ' 'initscript $command" ;;\n' 'esac\n'}} * 12:08:57 -- ********** 1 SUCCESSFUL step initscripts on plctest1_vplc02 TRACE: 1 12-08-57->0s=0:00:00.031651s status=OK step=initscripts plc=plctest1_vplc02 force=False * 12:08:57 -- ********** 1 RUNNING step sites on plc plctest1_vplc02 * 12:08:57 -- Creating site inri & users in plctest1_vplc02.2016.01.18--f14-n3-1-vplc02 {'AuthMethod': 'password', 'Role': 'root', 'Username': 'root@test.onelab.eu', 'AuthString': 'test++'} * 12:08:57 -- Adding user admin@onelab.eu - roles ['admin'] * 12:08:57 -- Adding user fake-pi1@onelab.eu - roles ['pi'] * 12:08:58 -- Adding user fake-pi2@onelab.eu - roles ['pi', 'tech'] * 12:08:58 -- Adding user fake-tech1@onelab.eu - roles ['tech'] * 12:08:58 -- Adding user fake-user1@onelab.eu - roles ['user'] * 12:08:58 -- Adding user fake-tech2@onelab.eu - roles ['tech', 'user'] * 12:08:58 -- ********** 1 SUCCESSFUL step sites on plctest1_vplc02 TRACE: 1 12-08-57->1s=0:00:01.381979s status=OK step=sites plc=plctest1_vplc02 force=False * 12:08:58 -- ********** 1 RUNNING step nodes on plc plctest1_vplc02 * 12:08:58 -- Creating nodes for site inri in plctest1_vplc02.2016.01.18--f14-n3-1-vplc02 > 12:08:58 -- Creating node {'name': 'node1', 'tags': {}, 'owner': 'pi', 'interface_fields': {'broadcast': '138.96.119.255', 'network': '138.96.112.0', 'netmask': '255.255.248.0', 'ip': '138.96.112.102', 'mac': '02:34:56:00:00:02', 'gateway': '138.96.112.250', 'type': 'ipv4', 'method': 'static', 'dns2': '138.96.112.2', 'dns1': '138.96.112.1'}, 'ipaddress_fields': {'ip_addr': '138.96.112.102', 'type': 'ipv4', 'netmask': '255.255.248.0'}, 'host_box': 'boxtops', 'node_fields_nint': {'dns': '138.96.112.1,138.96.112.2'}, 'route_fields': {'next_hop': '138.96.112.250', 'subnet': '0.0.0.0/0'}, 'nodegroups': 'mynodegroup', 'node_fields': {'model': 'qemu/minhw', 'hostname': 'vnode02.pl.sophia.inria.fr'}, 'interface_fields_nint': {'is_primary': True, 'method': 'static'}, 'bootmedium_options': ['serial', 'no-hangcheck', 'systemd-debug']} { 'bootmedium_options': ['serial', 'no-hangcheck', 'systemd-debug'], 'host_box': 'boxtops', 'interface_fields': { 'broadcast': '138.96.119.255', 'dns1': '138.96.112.1', 'dns2': '138.96.112.2', 'gateway': '138.96.112.250', 'ip': '138.96.112.102', 'mac': '02:34:56:00:00:02', 'method': 'static', 'netmask': '255.255.248.0', 'network': '138.96.112.0', 'type': 'ipv4'}, 'interface_fields_nint': {'is_primary': True, 'method': 'static'}, 'ipaddress_fields': { 'ip_addr': '138.96.112.102', 'netmask': '255.255.248.0', 'type': 'ipv4'}, 'name': 'node1', 'node_fields': { 'hostname': 'vnode02.pl.sophia.inria.fr', 'model': 'qemu/minhw'}, 'node_fields_nint': {'dns': '138.96.112.1,138.96.112.2'}, 'nodegroups': 'mynodegroup', 'owner': 'pi', 'route_fields': {'next_hop': '138.96.112.250', 'subnet': '0.0.0.0/0'}, 'tags': {}} * 12:08:58 -- node vnode02.pl.sophia.inria.fr created by user fake-pi1@onelab.eu * 12:08:58 -- ********** 1 SUCCESSFUL step nodes on plctest1_vplc02 TRACE: 1 12-08-58->0s=0:00:00.147085s status=OK step=nodes plc=plctest1_vplc02 force=False * 12:08:58 -- ********** 1 RUNNING step slices on plc plctest1_vplc02 * 12:08:58 -- Creating slice inri_sl1 * 12:08:59 -- Adding initscript code #!/bin/bash command=$1; shift slicename=$1; shift stamp="initscript_by_code" stampfile=/var/tmp/$stamp.stamp date=$(date) echo $date "Running initscript with command=$command and slicename=$slicename" function start () { (echo $date Starting test initscript: $stamp on slicename $slicename ; date) >> $stampfile echo $date "This is the stdout of the sliver $slicename initscript $command (exp. start) pid=$$" echo $date "This is the stderr of the sliver $slicename initscript $command (exp. start) pid=$$" 1>&2 } function stop () { echo $date "Removing stamp $stampfile" rm -f $stampfile } function restart () { stop start } case $command in start) start ;; stop) stop ;; restart) restart ;; *) echo "Unknown command in initscript $command" ;; esac in inri_sl1 * 12:08:59 -- Adding ['vnode02.pl.sophia.inria.fr'] in inri_sl1 * 12:08:59 -- Creating slice inri_sl2 * 12:08:59 -- Adding initscript name initscript_by_name in inri_sl2 * 12:08:59 -- Adding ['vnode02.pl.sophia.inria.fr'] in inri_sl2 * 12:08:59 -- Creating slice inri_sl3 * 12:08:59 -- Making slice inri_sl3 OMF-friendly * 12:08:59 -- Adding ['vnode02.pl.sophia.inria.fr'] in inri_sl3 * 12:08:59 -- ********** 1 SUCCESSFUL step slices on plctest1_vplc02 TRACE: 1 12-08-58->0s=0:00:00.759600s status=OK step=slices plc=plctest1_vplc02 force=False * 12:08:59 -- ********** 1 RUNNING step nodegroups on plc plctest1_vplc02 nodegroups: dealing with nodegroup mynodegroup on nodes ['vnode02.pl.sophia.inria.fr'] located tag (type) mynodegroup as 117 created nodegroup mynodegroup from tagname mynodegroup and value yes * 12:08:59 -- ********** 1 SUCCESSFUL step nodegroups on plctest1_vplc02 TRACE: 1 12-08-59->0s=0:00:00.176661s status=OK step=nodegroups plc=plctest1_vplc02 force=False * 12:08:59 -- ********** 1 RUNNING step leases on plc plctest1_vplc02 API answered grain= 1800 * 12:08:59 -- No reservable node found - proceeding without leases * 12:08:59 -- ********** 1 SUCCESSFUL step leases on plctest1_vplc02 TRACE: 1 12-08-59->0s=0:00:00.023928s status=OK step=leases plc=plctest1_vplc02 force=False * 12:08:59 -- ********** 1 RUNNING step check_vsys_defaults_ignore on plc plctest1_vplc02 Actual (but ignored) result for check_vsys_defaults is True * 12:09:00 -- ********** 1 IGNORED (OK) step check_vsys_defaults_ignore on plctest1_vplc02 TRACE: 1 12-08-59->0s=0:00:00.103021s status=OK[I] step=check_vsys_defaults_ignore plc=plctest1_vplc02 force=False * 12:09:00 -- ********** 1 RUNNING step qemu_kill_mine on plc plctest1_vplc02 * 12:09:00 -- Stopping qemu for node vnode02.pl.sophia.inria.fr on box boxtops * 12:09:00 -- On boxtops: running qemu-vnode02.pl.sophia.inria.fr/qemu-kill-node vnode02.pl.sophia.inria.fr -> 12:09:00 -- + ssh -n -o BatchMode=yes -o StrictHostKeyChecking=no -o CheckHostIP=no -o ConnectTimeout=5 -o UserKnownHostsFile=/dev/null boxtops mkdir -p /vservers/2016.01.18--f14-n3 Warning: Permanently added 'boxtops' (ECDSA) to the list of known hosts. -> 12:09:00 -- + ssh -n -o BatchMode=yes -o StrictHostKeyChecking=no -o CheckHostIP=no -o ConnectTimeout=5 -o UserKnownHostsFile=/dev/null boxtops cd /vservers/2016.01.18--f14-n3 ';' qemu-vnode02.pl.sophia.inria.fr/qemu-kill-node vnode02.pl.sophia.inria.fr Warning: Permanently added 'boxtops' (ECDSA) to the list of known hosts. bash: qemu-vnode02.pl.sophia.inria.fr/qemu-kill-node: No such file or directory * 12:09:00 -- ********** 1 SUCCESSFUL step qemu_kill_mine on plctest1_vplc02 TRACE: 1 12-09-00->0s=0:00:00.638053s status=OK step=qemu_kill_mine plc=plctest1_vplc02 force=False * 12:09:00 -- ********** 1 RUNNING step nodestate_reinstall on plc plctest1_vplc02 * 12:09:00 -- ********** 1 SUCCESSFUL step nodestate_reinstall on plctest1_vplc02 TRACE: 1 12-09-00->0s=0:00:00.045299s status=OK step=nodestate_reinstall plc=plctest1_vplc02 force=False * 12:09:00 -- ********** 1 RUNNING step qemu_local_init on plc plctest1_vplc02 -> 12:09:00 -- + rm -rf qemu-vnode02.pl.sophia.inria.fr -> 12:09:00 -- + mkdir qemu-vnode02.pl.sophia.inria.fr -> 12:09:00 -- + rsync -v -a --exclude .svn template-qemu/ qemu-vnode02.pl.sophia.inria.fr/ sending incremental file list ./ iptables.py qemu-bridge-init qemu-ifdown qemu-ifup qemu-kill-node qemu-start-node sent 13,696 bytes received 133 bytes 27,658.00 bytes/sec total size is 13,299 speedup is 0.96 * 12:09:00 -- ********** 1 SUCCESSFUL step qemu_local_init on plctest1_vplc02 TRACE: 1 12-09-00->0s=0:00:00.084222s status=OK step=qemu_local_init plc=plctest1_vplc02 force=False * 12:09:00 -- ********** 1 RUNNING step bootcd on plc plctest1_vplc02 * 12:09:00 -- Calling GetBootMedium for vnode02.pl.sophia.inria.fr * 12:09:04 -- Storing boot medium into qemu-vnode02.pl.sophia.inria.fr/vnode02.pl.sophia.inria.fr.iso * 12:09:04 -- ********** 1 SUCCESSFUL step bootcd on plctest1_vplc02 TRACE: 1 12-09-00->3s=0:00:03.802432s status=OK step=bootcd plc=plctest1_vplc02 force=False * 12:09:04 -- ********** 1 RUNNING step qemu_local_config on plc plctest1_vplc02 * 12:09:04 -- Storing qemu config for vnode02.pl.sophia.inria.fr in qemu-vnode02.pl.sophia.inria.fr/qemu.conf * 12:09:04 -- ********** 1 SUCCESSFUL step qemu_local_config on plctest1_vplc02 TRACE: 1 12-09-04->0s=0:00:00.032333s status=OK step=qemu_local_config plc=plctest1_vplc02 force=False * 12:09:04 -- ********** 1 RUNNING step qemu_clean_mine on plc plctest1_vplc02 * 12:09:04 -- Cleaning up qemu for host vnode02.pl.sophia.inria.fr on box boxtops -> 12:09:04 -- + ssh -n -o BatchMode=yes -o StrictHostKeyChecking=no -o CheckHostIP=no -o ConnectTimeout=5 -o UserKnownHostsFile=/dev/null boxtops rm -rf /vservers/2016.01.18--f14-n3/qemu-vnode02.pl.sophia.inria.fr Warning: Permanently added 'boxtops' (ECDSA) to the list of known hosts. * 12:09:04 -- ********** 1 SUCCESSFUL step qemu_clean_mine on plctest1_vplc02 TRACE: 1 12-09-04->0s=0:00:00.318817s status=OK step=qemu_clean_mine plc=plctest1_vplc02 force=False * 12:09:04 -- ********** 1 RUNNING step qemu_export on plc plctest1_vplc02 * 12:09:04 -- Cleaning any former sequel of vnode02.pl.sophia.inria.fr on boxtops * 12:09:04 -- Transferring configuration files for node vnode02.pl.sophia.inria.fr onto boxtops -> 12:09:04 -- + ssh -n -o BatchMode=yes -o StrictHostKeyChecking=no -o CheckHostIP=no -o ConnectTimeout=5 -o UserKnownHostsFile=/dev/null boxtops mkdir -p /vservers/2016.01.18--f14-n3 Warning: Permanently added 'boxtops' (ECDSA) to the list of known hosts. -> 12:09:05 -- + scp -o BatchMode=yes -o StrictHostKeyChecking=no -o CheckHostIP=no -o ConnectTimeout=5 -r qemu-vnode02.pl.sophia.inria.fr boxtops:/vservers/2016.01.18--f14-n3/qemu-vnode02.pl.sophia.inria.fr * 12:09:06 -- ********** 1 SUCCESSFUL step qemu_export on plctest1_vplc02 TRACE: 1 12-09-04->1s=0:00:01.540488s status=OK step=qemu_export plc=plctest1_vplc02 force=False * 12:09:06 -- ********** 1 RUNNING step qemu_cleanlog on plc plctest1_vplc02 * 12:09:06 -- On boxtops: running cd qemu-vnode02.pl.sophia.inria.fr; mv -f log.txt log.txt.bak -> 12:09:06 -- + ssh -n -o BatchMode=yes -o StrictHostKeyChecking=no -o CheckHostIP=no -o ConnectTimeout=5 -o UserKnownHostsFile=/dev/null boxtops mkdir -p /vservers/2016.01.18--f14-n3 Warning: Permanently added 'boxtops' (ECDSA) to the list of known hosts. -> 12:09:06 -- + ssh -n -o BatchMode=yes -o StrictHostKeyChecking=no -o CheckHostIP=no -o ConnectTimeout=5 -o UserKnownHostsFile=/dev/null boxtops cd /vservers/2016.01.18--f14-n3 ';' cd 'qemu-vnode02.pl.sophia.inria.fr;' mv -f log.txt log.txt.bak Warning: Permanently added 'boxtops' (ECDSA) to the list of known hosts. mv: cannot stat 'log.txt': No such file or directory * 12:09:07 -- ********** 1 SUCCESSFUL step qemu_cleanlog on plctest1_vplc02 TRACE: 1 12-09-06->0s=0:00:00.638116s status=OK step=qemu_cleanlog plc=plctest1_vplc02 force=False * 12:09:07 -- ********** 1 RUNNING step qemu_start on plc plctest1_vplc02 * 12:09:07 -- Starting qemu node vnode02.pl.sophia.inria.fr on boxtops * 12:09:07 -- On boxtops: running qemu-vnode02.pl.sophia.inria.fr/qemu-bridge-init start >> qemu-vnode02.pl.sophia.inria.fr/log.txt -> 12:09:07 -- + ssh -n -o BatchMode=yes -o StrictHostKeyChecking=no -o CheckHostIP=no -o ConnectTimeout=5 -o UserKnownHostsFile=/dev/null boxtops mkdir -p /vservers/2016.01.18--f14-n3 Warning: Permanently added 'boxtops' (ECDSA) to the list of known hosts. -> 12:09:07 -- + ssh -n -o BatchMode=yes -o StrictHostKeyChecking=no -o CheckHostIP=no -o ConnectTimeout=5 -o UserKnownHostsFile=/dev/null boxtops cd /vservers/2016.01.18--f14-n3 ';' qemu-vnode02.pl.sophia.inria.fr/qemu-bridge-init start '>>' qemu-vnode02.pl.sophia.inria.fr/log.txt Warning: Permanently added 'boxtops' (ECDSA) to the list of known hosts. + INTERFACE_BRIDGE=br0 ++ discover_interface +++ gather_interfaces +++ python ++ for ifname in '$(gather_interfaces)' ++ ip link show eno3 ++ grep -qi 'state UP' ++ for ifname in '$(gather_interfaces)' ++ ip link show eno4 ++ grep -qi 'state UP' ++ for ifname in '$(gather_interfaces)' ++ ip link show eno1 ++ grep -qi 'state UP' ++ echo eno1 ++ return + INTERFACE_LAN=eno1 + echo Using physical interface eno1 + main start * 12:09:11 -- On boxtops: running qemu-vnode02.pl.sophia.inria.fr/qemu-start-node 2>&1 >> qemu-vnode02.pl.sophia.inria.fr/log.txt -> 12:09:11 -- + ssh -n -o BatchMode=yes -o StrictHostKeyChecking=no -o CheckHostIP=no -o ConnectTimeout=5 -o UserKnownHostsFile=/dev/null boxtops cd /vservers/2016.01.18--f14-n3 ';' qemu-vnode02.pl.sophia.inria.fr/qemu-start-node '2>&1' '>>' qemu-vnode02.pl.sophia.inria.fr/log.txt Warning: Permanently added 'boxtops' (ECDSA) to the list of known hosts. * 12:09:11 -- ********** 1 SUCCESSFUL step qemu_start on plctest1_vplc02 TRACE: 1 12-09-07->4s=0:00:04.667775s status=OK step=qemu_start plc=plctest1_vplc02 force=False * 12:09:11 -- ********** 1 RUNNING step qemu_timestamp on plc plctest1_vplc02 * 12:09:11 -- On boxtops: running mkdir -p qemu-vnode02.pl.sophia.inria.fr -> 12:09:11 -- + ssh -n -o BatchMode=yes -o StrictHostKeyChecking=no -o CheckHostIP=no -o ConnectTimeout=5 -o UserKnownHostsFile=/dev/null boxtops mkdir -p /vservers/2016.01.18--f14-n3 Warning: Permanently added 'boxtops' (ECDSA) to the list of known hosts. -> 12:09:12 -- + ssh -n -o BatchMode=yes -o StrictHostKeyChecking=no -o CheckHostIP=no -o ConnectTimeout=5 -o UserKnownHostsFile=/dev/null boxtops cd /vservers/2016.01.18--f14-n3 ';' mkdir -p qemu-vnode02.pl.sophia.inria.fr Warning: Permanently added 'boxtops' (ECDSA) to the list of known hosts. * 12:09:12 -- On boxtops: running echo 1453115352 > qemu-vnode02.pl.sophia.inria.fr/timestamp -> 12:09:12 -- + ssh -n -o BatchMode=yes -o StrictHostKeyChecking=no -o CheckHostIP=no -o ConnectTimeout=5 -o UserKnownHostsFile=/dev/null boxtops cd /vservers/2016.01.18--f14-n3 ';' echo 1453115352 '>' qemu-vnode02.pl.sophia.inria.fr/timestamp Warning: Permanently added 'boxtops' (ECDSA) to the list of known hosts. * 12:09:12 -- ********** 1 SUCCESSFUL step qemu_timestamp on plctest1_vplc02 TRACE: 1 12-09-11->0s=0:00:00.813547s status=OK step=qemu_timestamp plc=plctest1_vplc02 force=False * 12:09:12 -- ********** 1 RUNNING step qemu_nodefamily on plc plctest1_vplc02 * 12:09:12 -- On boxtops: running echo onelab-f14-x86_64 > qemu-vnode02.pl.sophia.inria.fr/nodefamily -> 12:09:12 -- + ssh -n -o BatchMode=yes -o StrictHostKeyChecking=no -o CheckHostIP=no -o ConnectTimeout=5 -o UserKnownHostsFile=/dev/null boxtops mkdir -p /vservers/2016.01.18--f14-n3 Warning: Permanently added 'boxtops' (ECDSA) to the list of known hosts. -> 12:09:12 -- + ssh -n -o BatchMode=yes -o StrictHostKeyChecking=no -o CheckHostIP=no -o ConnectTimeout=5 -o UserKnownHostsFile=/dev/null boxtops cd /vservers/2016.01.18--f14-n3 ';' echo onelab-f14-x86_64 '>' qemu-vnode02.pl.sophia.inria.fr/nodefamily Warning: Permanently added 'boxtops' (ECDSA) to the list of known hosts. * 12:09:13 -- ********** 1 SUCCESSFUL step qemu_nodefamily on plctest1_vplc02 TRACE: 1 12-09-12->0s=0:00:00.621887s status=OK step=qemu_nodefamily plc=plctest1_vplc02 force=False * 12:09:13 -- ********** 1 RUNNING step sfa_install_all on plc plctest1_vplc02 -> 12:09:13 -- + ssh -n -o BatchMode=yes -o StrictHostKeyChecking=no -o CheckHostIP=no -o ConnectTimeout=5 -o UserKnownHostsFile=/dev/null buzzcocks ssh -o BatchMode=yes -o StrictHostKeyChecking=no -o CheckHostIP=no -o ConnectTimeout=5 -o UserKnownHostsFile=/dev/null vplc02 yum -y install sfa sfa-plc sfa-sfatables sfa-client Warning: Permanently added 'buzzcocks' (ECDSA) to the list of known hosts. Warning: Permanently added 'vplc02' (RSA) to the list of known hosts. Failed to set locale, defaulting to C Setting up Install Process Resolving Dependencies --> Running transaction check ---> Package sfa.x86_64 0:3.1-20.onelab.2016.01.18 set to be installed --> Processing Dependency: python-sqlalchemy for package: sfa-3.1-20.onelab.2016.01.18.x86_64 --> Processing Dependency: python-migrate for package: sfa-3.1-20.onelab.2016.01.18.x86_64 --> Processing Dependency: sfa-common for package: sfa-3.1-20.onelab.2016.01.18.x86_64 ---> Package sfa-client.x86_64 0:3.1-20.onelab.2016.01.18 set to be installed ---> Package sfa-plc.x86_64 0:3.1-20.onelab.2016.01.18 set to be installed ---> Package sfa-sfatables.x86_64 0:3.1-20.onelab.2016.01.18 set to be installed --> Running transaction check ---> Package python-migrate.noarch 0:0.6-5.fc14 set to be installed --> Processing Dependency: python-tempita for package: python-migrate-0.6-5.fc14.noarch --> Processing Dependency: python-setuptools for package: python-migrate-0.6-5.fc14.noarch --> Processing Dependency: python-decorator for package: python-migrate-0.6-5.fc14.noarch ---> Package python-sqlalchemy.x86_64 0:0.6.8-1.fc14 set to be installed ---> Package sfa-common.x86_64 0:3.1-20.onelab.2016.01.18 set to be installed --> Processing Dependency: python-dateutil for package: sfa-common-3.1-20.onelab.2016.01.18.x86_64 --> Processing Dependency: xmlsec1-openssl-devel for package: sfa-common-3.1-20.onelab.2016.01.18.x86_64 --> Processing Dependency: libxslt-python for package: sfa-common-3.1-20.onelab.2016.01.18.x86_64 --> Processing Dependency: python-ZSI for package: sfa-common-3.1-20.onelab.2016.01.18.x86_64 --> Running transaction check ---> Package libxslt-python.x86_64 0:1.1.26-3.fc14 set to be installed ---> Package python-ZSI.noarch 0:2.0-8.fc14 set to be installed ---> Package python-dateutil.noarch 0:1.5-3.fc14 set to be installed ---> Package python-decorator.noarch 0:3.2.1-1.fc14 set to be installed ---> Package python-setuptools.noarch 0:0.6.24-1.fc14 set to be installed ---> Package python-tempita.noarch 0:0.4-5.fc14 set to be installed ---> Package xmlsec1-openssl-devel.x86_64 0:1.2.16-3.fc14 set to be installed --> Processing Dependency: xmlsec1-devel = 1.2.16-3.fc14 for package: xmlsec1-openssl-devel-1.2.16-3.fc14.x86_64 --> Processing Dependency: pkgconfig(libxslt) >= 1.0.20 for package: xmlsec1-openssl-devel-1.2.16-3.fc14.x86_64 --> Processing Dependency: pkgconfig(libxml-2.0) >= 2.7.4 for package: xmlsec1-openssl-devel-1.2.16-3.fc14.x86_64 --> Running transaction check ---> Package libxml2-devel.x86_64 0:2.7.7-3.fc14 set to be installed --> Processing Dependency: zlib-devel for package: libxml2-devel-2.7.7-3.fc14.x86_64 ---> Package libxslt-devel.x86_64 0:1.1.26-3.fc14 set to be installed --> Processing Dependency: libgcrypt-devel for package: libxslt-devel-1.1.26-3.fc14.x86_64 ---> Package xmlsec1-devel.x86_64 0:1.2.16-3.fc14 set to be installed --> Processing Dependency: openssl-devel >= 0.9.6 for package: xmlsec1-devel-1.2.16-3.fc14.x86_64 --> Running transaction check ---> Package libgcrypt-devel.x86_64 0:1.4.5-4.fc13 set to be installed --> Processing Dependency: libgpg-error-devel for package: libgcrypt-devel-1.4.5-4.fc13.x86_64 ---> Package openssl-devel.x86_64 0:1.0.0e-1.fc14 set to be installed --> Processing Dependency: krb5-devel for package: openssl-devel-1.0.0e-1.fc14.x86_64 ---> Package zlib-devel.x86_64 0:1.2.5-2.fc14 set to be installed --> Running transaction check ---> Package krb5-devel.x86_64 0:1.8.4-3.fc14 set to be installed --> Processing Dependency: libcom_err-devel for package: krb5-devel-1.8.4-3.fc14.x86_64 --> Processing Dependency: keyutils-libs-devel for package: krb5-devel-1.8.4-3.fc14.x86_64 --> Processing Dependency: libselinux-devel for package: krb5-devel-1.8.4-3.fc14.x86_64 ---> Package libgpg-error-devel.x86_64 0:1.9-1.fc14 set to be installed --> Running transaction check ---> Package keyutils-libs-devel.x86_64 0:1.2-6.fc12 set to be installed ---> Package libcom_err-devel.x86_64 0:1.41.12-6.fc14 set to be installed ---> Package libselinux-devel.x86_64 0:2.0.96-6.fc14.1 set to be installed --> Processing Dependency: libsepol-devel >= 2.0.32-1 for package: libselinux-devel-2.0.96-6.fc14.1.x86_64 --> Processing Dependency: pkgconfig(libsepol) for package: libselinux-devel-2.0.96-6.fc14.1.x86_64 --> Running transaction check ---> Package libsepol-devel.x86_64 0:2.0.41-3.fc14 set to be installed --> Finished Dependency Resolution Dependencies Resolved ================================================================================ Package Arch Version Repository Size ================================================================================ Installing: sfa x86_64 3.1-20.onelab.2016.01.18 myplc 71 k sfa-client x86_64 3.1-20.onelab.2016.01.18 myplc 48 k sfa-plc x86_64 3.1-20.onelab.2016.01.18 myplc 134 k sfa-sfatables x86_64 3.1-20.onelab.2016.01.18 myplc 71 k Installing for dependencies: keyutils-libs-devel x86_64 1.2-6.fc12 fedora 29 k krb5-devel x86_64 1.8.4-3.fc14 updates 1.2 M libcom_err-devel x86_64 1.41.12-6.fc14 updates 26 k libgcrypt-devel x86_64 1.4.5-4.fc13 fedora 117 k libgpg-error-devel x86_64 1.9-1.fc14 fedora 14 k libselinux-devel x86_64 2.0.96-6.fc14.1 updates 136 k libsepol-devel x86_64 2.0.41-3.fc14 fedora 64 k libxml2-devel x86_64 2.7.7-3.fc14 updates 1.1 M libxslt-devel x86_64 1.1.26-3.fc14 fedora 431 k libxslt-python x86_64 1.1.26-3.fc14 fedora 137 k openssl-devel x86_64 1.0.0e-1.fc14 updates 1.1 M python-ZSI noarch 2.0-8.fc14 fedora 423 k python-dateutil noarch 1.5-3.fc14 updates 85 k python-decorator noarch 3.2.1-1.fc14 updates 24 k python-migrate noarch 0.6-5.fc14 updates 206 k python-setuptools noarch 0.6.24-1.fc14 updates 345 k python-sqlalchemy x86_64 0.6.8-1.fc14 updates 1.8 M python-tempita noarch 0.4-5.fc14 fedora 38 k sfa-common x86_64 3.1-20.onelab.2016.01.18 myplc 536 k xmlsec1-devel x86_64 1.2.16-3.fc14 updates 457 k xmlsec1-openssl-devel x86_64 1.2.16-3.fc14 updates 12 k zlib-devel x86_64 1.2.5-2.fc14 fedora 45 k Transaction Summary ================================================================================ Install 26 Package(s) Total download size: 8.5 M Installed size: 37 M Downloading Packages: -------------------------------------------------------------------------------- Total 31 MB/s | 8.5 MB 00:00 Running rpm_check_debug Running Transaction Test Transaction Test Succeeded Running Transaction Installing : libxslt-python-1.1.26-3.fc14.x86_64 1/26 Installing : zlib-devel-1.2.5-2.fc14.x86_64 2/26 Installing : libxml2-devel-2.7.7-3.fc14.x86_64 3/26 Installing : python-sqlalchemy-0.6.8-1.fc14.x86_64 4/26 Installing : python-setuptools-0.6.24-1.fc14.noarch 5/26 Installing : python-ZSI-2.0-8.fc14.noarch 6/26 Installing : libsepol-devel-2.0.41-3.fc14.x86_64 7/26 Installing : libselinux-devel-2.0.96-6.fc14.1.x86_64 8/26 Installing : libcom_err-devel-1.41.12-6.fc14.x86_64 9/26 Installing : libgpg-error-devel-1.9-1.fc14.x86_64 10/26 Installing : libgcrypt-devel-1.4.5-4.fc13.x86_64 11/26 Installing : libxslt-devel-1.1.26-3.fc14.x86_64 12/26 Installing : python-tempita-0.4-5.fc14.noarch 13/26 Installing : python-dateutil-1.5-3.fc14.noarch 14/26 Installing : keyutils-libs-devel-1.2-6.fc12.x86_64 15/26 Installing : krb5-devel-1.8.4-3.fc14.x86_64 16/26 Installing : openssl-devel-1.0.0e-1.fc14.x86_64 17/26 Installing : xmlsec1-devel-1.2.16-3.fc14.x86_64 18/26 Installing : xmlsec1-openssl-devel-1.2.16-3.fc14.x86_64 19/26 Installing : sfa-common-3.1-20.onelab.2016.01.18.x86_64 20/26 Installing : python-decorator-3.2.1-1.fc14.noarch 21/26 Installing : python-migrate-0.6-5.fc14.noarch 22/26 Installing : sfa-3.1-20.onelab.2016.01.18.x86_64 23/26 Installing : sfa-sfatables-3.1-20.onelab.2016.01.18.x86_64 24/26 Installing : sfa-plc-3.1-20.onelab.2016.01.18.x86_64 25/26 Installing : sfa-client-3.1-20.onelab.2016.01.18.x86_64 26/26 Installed: sfa.x86_64 0:3.1-20.onelab.2016.01.18 sfa-client.x86_64 0:3.1-20.onelab.2016.01.18 sfa-plc.x86_64 0:3.1-20.onelab.2016.01.18 sfa-sfatables.x86_64 0:3.1-20.onelab.2016.01.18 Dependency Installed: keyutils-libs-devel.x86_64 0:1.2-6.fc12 krb5-devel.x86_64 0:1.8.4-3.fc14 libcom_err-devel.x86_64 0:1.41.12-6.fc14 libgcrypt-devel.x86_64 0:1.4.5-4.fc13 libgpg-error-devel.x86_64 0:1.9-1.fc14 libselinux-devel.x86_64 0:2.0.96-6.fc14.1 libsepol-devel.x86_64 0:2.0.41-3.fc14 libxml2-devel.x86_64 0:2.7.7-3.fc14 libxslt-devel.x86_64 0:1.1.26-3.fc14 libxslt-python.x86_64 0:1.1.26-3.fc14 openssl-devel.x86_64 0:1.0.0e-1.fc14 python-ZSI.noarch 0:2.0-8.fc14 python-dateutil.noarch 0:1.5-3.fc14 python-decorator.noarch 0:3.2.1-1.fc14 python-migrate.noarch 0:0.6-5.fc14 python-setuptools.noarch 0:0.6.24-1.fc14 python-sqlalchemy.x86_64 0:0.6.8-1.fc14 python-tempita.noarch 0:0.4-5.fc14 sfa-common.x86_64 0:3.1-20.onelab.2016.01.18 xmlsec1-devel.x86_64 0:1.2.16-3.fc14 xmlsec1-openssl-devel.x86_64 0:1.2.16-3.fc14 zlib-devel.x86_64 0:1.2.5-2.fc14 Complete! -> 12:09:22 -- + ssh -n -o BatchMode=yes -o StrictHostKeyChecking=no -o CheckHostIP=no -o ConnectTimeout=5 -o UserKnownHostsFile=/dev/null buzzcocks ssh -o BatchMode=yes -o StrictHostKeyChecking=no -o CheckHostIP=no -o ConnectTimeout=5 -o UserKnownHostsFile=/dev/null vplc02 yum-complete-transaction -y Warning: Permanently added 'buzzcocks' (ECDSA) to the list of known hosts. Warning: Permanently added 'vplc02' (RSA) to the list of known hosts. Failed to set locale, defaulting to C No unfinished transactions left. -> 12:09:23 -- + ssh -n -o BatchMode=yes -o StrictHostKeyChecking=no -o CheckHostIP=no -o ConnectTimeout=5 -o UserKnownHostsFile=/dev/null buzzcocks ssh -o BatchMode=yes -o StrictHostKeyChecking=no -o CheckHostIP=no -o ConnectTimeout=5 -o UserKnownHostsFile=/dev/null vplc02 rpm -q sfa sfa-plc sfa-sfatables sfa-client Warning: Permanently added 'buzzcocks' (ECDSA) to the list of known hosts. Warning: Permanently added 'vplc02' (RSA) to the list of known hosts. sfa-3.1-20.onelab.2016.01.18.x86_64 sfa-plc-3.1-20.onelab.2016.01.18.x86_64 sfa-sfatables-3.1-20.onelab.2016.01.18.x86_64 sfa-client-3.1-20.onelab.2016.01.18.x86_64 * 12:09:23 -- ********** 1 SUCCESSFUL step sfa_install_all on plctest1_vplc02 TRACE: 1 12-09-13->10s=0:00:10.532744s status=OK step=sfa_install_all plc=plctest1_vplc02 force=False * 12:09:23 -- ********** 1 RUNNING step sfa_configure on plc plctest1_vplc02 -> 12:09:23 -- + mkdir -p conf.plctest1_vplc02 -> 12:09:23 -- + cat conf.plctest1_vplc02/sfa-config-tty e SFA_DB_HOST vplc02.pl.sophia.inria.fr e SFA_PLC_USER root@test.onelab.eu e SFA_REGISTRY_ROOT_AUTH a e SFA_AGGREGATE_HOST vplc02.pl.sophia.inria.fr e SFA_AGGREGATE_ENABLED true e SFA_PLC_URL https://vplc02.pl.sophia.inria.fr:443/PLCAPI/ e SFA_REGISTRY_HOST vplc02.pl.sophia.inria.fr e SFA_INTERFACE_HRN a e SFA_SM_HOST vplc02.pl.sophia.inria.fr e SFA_GENERIC_FLAVOUR pl e SFA_API_LOGLEVEL 1 e SFA_PLC_PASSWORD test++ e SFA_SM_ENABLED false w R q -> 12:09:23 -- + cat conf.plctest1_vplc02/sfa-config-tty + ssh -o BatchMode=yes -o StrictHostKeyChecking=no -o CheckHostIP=no -o ConnectTimeout=5 -o UserKnownHostsFile=/dev/null buzzcocks ssh -o BatchMode=yes -o StrictHostKeyChecking=no -o CheckHostIP=no -o ConnectTimeout=5 -o UserKnownHostsFile=/dev/null vplc02 sfa-config-tty Warning: Permanently added 'buzzcocks' (ECDSA) to the list of known hosts. Warning: Permanently added 'vplc02' (RSA) to the list of known hosts. + service sfa reload Reloading sfa configuration (via systemctl): Failed to get D-Bus connection: Failed to connect to socket /org/freedesktop/systemd1/private: Connection refused [FAILED] Created directory /etc/sfa/configs Enter command (u for usual changes, w to save, ? for help) == sfa_db_host : [localhost] Enter command (u for usual changes, w to save, ? for help) == sfa_plc_user : [root@localhost.localdomain] Enter command (u for usual changes, w to save, ? for help) == sfa_registry_root_auth : [plc] Enter command (u for usual changes, w to save, ? for help) == sfa_aggregate_host : [localhost] Enter command (u for usual changes, w to save, ? for help) == sfa_aggregate_enabled : [true] Enter command (u for usual changes, w to save, ? for help) == sfa_plc_url : [https://localhost:443/PLCAPI/] Enter command (u for usual changes, w to save, ? for help) == sfa_registry_host : [localhost] Enter command (u for usual changes, w to save, ? for help) == sfa_interface_hrn : [plc] Enter command (u for usual changes, w to save, ? for help) == sfa_sm_host : [localhost] Enter command (u for usual changes, w to save, ? for help) == sfa_generic_flavour : [pl] Enter command (u for usual changes, w to save, ? for help) == sfa_api_loglevel : [0] Enter command (u for usual changes, w to save, ? for help) == sfa_plc_password : [root] Enter command (u for usual changes, w to save, ? for help) == sfa_sm_enabled : [false] Enter command (u for usual changes, w to save, ? for help) Wrote /etc/sfa/configs/site_config Merged /etc/sfa/default_config.xml and /etc/sfa/configs/site_config into /etc/sfa/sfa_config You might want to type 'r' (restart sfa), 'R' (reload sfa) or 'q' (quit) Enter command (u for usual changes, w to save, ? for help) Enter command (u for usual changes, w to save, ? for help) * 12:09:24 -- ********** 1 SUCCESSFUL step sfa_configure on plctest1_vplc02 TRACE: 1 12-09-23->0s=0:00:00.538663s status=OK step=sfa_configure plc=plctest1_vplc02 force=False * 12:09:24 -- ********** 1 RUNNING step cross_sfa_configure on plc plctest1_vplc02 * 12:09:24 -- ********** 1 SUCCESSFUL step cross_sfa_configure on plctest1_vplc02 TRACE: 1 12-09-24->0s=0:00:00.000154s status=OK step=cross_sfa_configure plc=plctest1_vplc02 force=False * 12:09:24 -- ********** 1 RUNNING step sfa_start on plc plctest1_vplc02 -> 12:09:24 -- + ssh -n -o BatchMode=yes -o StrictHostKeyChecking=no -o CheckHostIP=no -o ConnectTimeout=5 -o UserKnownHostsFile=/dev/null buzzcocks ssh -o BatchMode=yes -o StrictHostKeyChecking=no -o CheckHostIP=no -o ConnectTimeout=5 -o UserKnownHostsFile=/dev/null vplc02 sed -i -e '\"s,env' '-i,env,\"' /sbin/service Warning: Permanently added 'buzzcocks' (ECDSA) to the list of known hosts. Warning: Permanently added 'vplc02' (RSA) to the list of known hosts. -> 12:09:24 -- + ssh -n -o BatchMode=yes -o StrictHostKeyChecking=no -o CheckHostIP=no -o ConnectTimeout=5 -o UserKnownHostsFile=/dev/null buzzcocks ssh -o BatchMode=yes -o StrictHostKeyChecking=no -o CheckHostIP=no -o ConnectTimeout=5 -o UserKnownHostsFile=/dev/null vplc02 SYSTEMCTL_SKIP_REDIRECT=true service sfa start Warning: Permanently added 'buzzcocks' (ECDSA) to the list of known hosts. Warning: Permanently added 'vplc02' (RSA) to the list of known hosts. Upgrading to 2.1 or higher: make sure to run import SFA: Checking for PostgreSQL server[ OK ] SFA: installing peer certs [ OK ] [ OK ] SFA: Registry [ OK ] [ OK ] SFA: Aggregate [ OK ] [ OK ] * 12:09:30 -- ********** 1 SUCCESSFUL step sfa_start on plctest1_vplc02 TRACE: 1 12-09-24->6s=0:00:06.151615s status=OK step=sfa_start plc=plctest1_vplc02 force=False * 12:09:30 -- ********** 1 RUNNING step sfa_import on plc plctest1_vplc02 -> 12:09:30 -- + ssh -n -o BatchMode=yes -o StrictHostKeyChecking=no -o CheckHostIP=no -o ConnectTimeout=5 -o UserKnownHostsFile=/dev/null buzzcocks ssh -o BatchMode=yes -o StrictHostKeyChecking=no -o CheckHostIP=no -o ConnectTimeout=5 -o UserKnownHostsFile=/dev/null vplc02 sfaadmin reg import_registry Warning: Permanently added 'buzzcocks' (ECDSA) to the list of known hosts. Warning: Permanently added 'vplc02' (RSA) to the list of known hosts. * 12:09:34 -- ********** 1 SUCCESSFUL step sfa_import on plctest1_vplc02 TRACE: 1 12-09-30->3s=0:00:03.625817s status=OK step=sfa_import plc=plctest1_vplc02 force=False * 12:09:34 -- ********** 1 RUNNING step sfi_configure on plc plctest1_vplc02 -> 12:09:34 -- + rm -rf conf.plctest1_vplc02/dot-sfi/sfi -> 12:09:34 -- + mkdir -p conf.plctest1_vplc02/dot-sfi/sfi * 12:09:34 -- (Over)wrote conf.plctest1_vplc02/dot-sfi/sfi/a.sfa.pi-user.pkey * 12:09:34 -- (Over)wrote conf.plctest1_vplc02/dot-sfi/sfi/a.sfa.pi-user.pub * 12:09:34 -- (Over)wrote conf.plctest1_vplc02/dot-sfi/sfi/a.sfa.regular-user.pkey * 12:09:34 -- (Over)wrote conf.plctest1_vplc02/dot-sfi/sfi/a.sfa.regular-user.pub * 12:09:34 -- (Over)wrote conf.plctest1_vplc02/dot-sfi/sfi/sfi_config -> 12:09:34 -- + ssh -n -o BatchMode=yes -o StrictHostKeyChecking=no -o CheckHostIP=no -o ConnectTimeout=5 -o UserKnownHostsFile=/dev/null buzzcocks mkdir -p /vservers/2016.01.18--f14-n3-1-vplc02///root/sfi Warning: Permanently added 'buzzcocks' (ECDSA) to the list of known hosts. -> 12:09:34 -- + scp -o BatchMode=yes -o StrictHostKeyChecking=no -o CheckHostIP=no -o ConnectTimeout=5 -r conf.plctest1_vplc02/dot-sfi/sfi buzzcocks:/vservers/2016.01.18--f14-n3-1-vplc02///root * 12:09:34 -- ********** 1 SUCCESSFUL step sfi_configure on plctest1_vplc02 TRACE: 1 12-09-34->0s=0:00:00.554965s status=OK step=sfi_configure plc=plctest1_vplc02 force=False * 12:09:34 -- ********** 1 RUNNING step sfa_register_site on plc plctest1_vplc02 -> 12:09:34 -- + ssh -n -o BatchMode=yes -o StrictHostKeyChecking=no -o CheckHostIP=no -o ConnectTimeout=5 -o UserKnownHostsFile=/dev/null buzzcocks ssh -o BatchMode=yes -o StrictHostKeyChecking=no -o CheckHostIP=no -o ConnectTimeout=5 -o UserKnownHostsFile=/dev/null vplc02 sfaadmin reg register -t authority -x a.sfa Warning: Permanently added 'buzzcocks' (ECDSA) to the list of known hosts. Warning: Permanently added 'vplc02' (RSA) to the list of known hosts. * 12:09:35 -- ********** 1 SUCCESSFUL step sfa_register_site on plctest1_vplc02 TRACE: 1 12-09-34->0s=0:00:00.919705s status=OK step=sfa_register_site plc=plctest1_vplc02 force=False * 12:09:35 -- ********** 1 RUNNING step sfa_register_pi on plc plctest1_vplc02 -> 12:09:35 -- + ssh -n -o BatchMode=yes -o StrictHostKeyChecking=no -o CheckHostIP=no -o ConnectTimeout=5 -o UserKnownHostsFile=/dev/null buzzcocks ssh -o BatchMode=yes -o StrictHostKeyChecking=no -o CheckHostIP=no -o ConnectTimeout=5 -o UserKnownHostsFile=/dev/null vplc02 sfaadmin reg register -t user -x a.sfa.pi-user --email pi-user@test.onelab.eu --key /root/sfi/a.sfa.pi-user.pub Warning: Permanently added 'buzzcocks' (ECDSA) to the list of known hosts. Warning: Permanently added 'vplc02' (RSA) to the list of known hosts. From: Regression TestLab Support , To: *from*sfa* *from*sfa* , Subject: Regression TestLab account enabled -> 12:09:36 -- + ssh -n -o BatchMode=yes -o StrictHostKeyChecking=no -o CheckHostIP=no -o ConnectTimeout=5 -o UserKnownHostsFile=/dev/null buzzcocks ssh -o BatchMode=yes -o StrictHostKeyChecking=no -o CheckHostIP=no -o ConnectTimeout=5 -o UserKnownHostsFile=/dev/null vplc02 sfaadmin reg update -t authority -x a.sfa --pi a.sfa.pi-user Warning: Permanently added 'buzzcocks' (ECDSA) to the list of known hosts. Warning: Permanently added 'vplc02' (RSA) to the list of known hosts. DO NOT REMOVE ME before driver.update, record= * 12:09:37 -- ********** 1 SUCCESSFUL step sfa_register_pi on plctest1_vplc02 TRACE: 1 12-09-35->1s=0:00:01.791341s status=OK step=sfa_register_pi plc=plctest1_vplc02 force=False * 12:09:37 -- ********** 1 RUNNING step sfa_register_user on plc plctest1_vplc02 -> 12:09:37 -- + ssh -n -o BatchMode=yes -o StrictHostKeyChecking=no -o CheckHostIP=no -o ConnectTimeout=5 -o UserKnownHostsFile=/dev/null buzzcocks ssh -o BatchMode=yes -o StrictHostKeyChecking=no -o CheckHostIP=no -o ConnectTimeout=5 -o UserKnownHostsFile=/dev/null vplc02 sfi -d /root/sfi -u a.sfa.pi-user register --type user --xrn a.sfa.regular-user --email regular-user@test.onelab.eu --extra first_name=Fake --extra last_name=SFA -k /root/sfi/a.sfa.regular-user.pub Warning: Permanently added 'buzzcocks' (ECDSA) to the list of known hosts. Warning: Permanently added 'vplc02' (RSA) to the list of known hosts. * 12:09:38 -- ********** 1 SUCCESSFUL step sfa_register_user on plctest1_vplc02 TRACE: 1 12-09-37->1s=0:00:01.573543s status=OK step=sfa_register_user plc=plctest1_vplc02 force=False * 12:09:38 -- ********** 1 RUNNING step sfa_update_user on plc plctest1_vplc02 -> 12:09:38 -- + ssh -n -o BatchMode=yes -o StrictHostKeyChecking=no -o CheckHostIP=no -o ConnectTimeout=5 -o UserKnownHostsFile=/dev/null buzzcocks ssh -o BatchMode=yes -o StrictHostKeyChecking=no -o CheckHostIP=no -o ConnectTimeout=5 -o UserKnownHostsFile=/dev/null vplc02 sfi -d /root/sfi -u a.sfa.pi-user update --type user --xrn a.sfa.regular-user --extra enabled=true Warning: Permanently added 'buzzcocks' (ECDSA) to the list of known hosts. Warning: Permanently added 'vplc02' (RSA) to the list of known hosts. * 12:09:39 -- ********** 1 SUCCESSFUL step sfa_update_user on plctest1_vplc02 TRACE: 1 12-09-38->0s=0:00:00.670482s status=OK step=sfa_update_user plc=plctest1_vplc02 force=False * 12:09:39 -- ********** 1 RUNNING step sfa_register_slice on plc plctest1_vplc02 -> 12:09:39 -- + ssh -n -o BatchMode=yes -o StrictHostKeyChecking=no -o CheckHostIP=no -o ConnectTimeout=5 -o UserKnownHostsFile=/dev/null buzzcocks ssh -o BatchMode=yes -o StrictHostKeyChecking=no -o CheckHostIP=no -o ConnectTimeout=5 -o UserKnownHostsFile=/dev/null vplc02 sfi -d /root/sfi -u a.sfa.pi-user register --type slice --xrn a.sfa.sl --researchers a.sfa.regular-user --extra description=SFA-testing --extra url=http://slice1.test.onelab.eu/ --extra max_nodes=2 Warning: Permanently added 'buzzcocks' (ECDSA) to the list of known hosts. Warning: Permanently added 'vplc02' (RSA) to the list of known hosts. * 12:09:40 -- ********** 1 SUCCESSFUL step sfa_register_slice on plctest1_vplc02 TRACE: 1 12-09-39->0s=0:00:00.970080s status=OK step=sfa_register_slice plc=plctest1_vplc02 force=False * 12:09:40 -- ********** 1 RUNNING step sfa_renew_slice on plc plctest1_vplc02 -> 12:09:40 -- + ssh -n -o BatchMode=yes -o StrictHostKeyChecking=no -o CheckHostIP=no -o ConnectTimeout=5 -o UserKnownHostsFile=/dev/null buzzcocks ssh -o BatchMode=yes -o StrictHostKeyChecking=no -o CheckHostIP=no -o ConnectTimeout=5 -o UserKnownHostsFile=/dev/null vplc02 sfi -d /root/sfi -u a.sfa.regular-user renew a.sfa.sl +12m Warning: Permanently added 'buzzcocks' (ECDSA) to the list of known hosts. Warning: Permanently added 'vplc02' (RSA) to the list of known hosts. ERROR: : Renew: ['urn:publicid:IDN+a:sfa+slice+sl'] does not exist here -> 12:09:41 -- + ssh -n -o BatchMode=yes -o StrictHostKeyChecking=no -o CheckHostIP=no -o ConnectTimeout=5 -o UserKnownHostsFile=/dev/null buzzcocks ssh -o BatchMode=yes -o StrictHostKeyChecking=no -o CheckHostIP=no -o ConnectTimeout=5 -o UserKnownHostsFile=/dev/null vplc02 sfi -d /root/sfi -u a.sfa.regular-user show -k hrn -k expires a.sfa.sl Warning: Permanently added 'buzzcocks' (ECDSA) to the list of known hosts. Warning: Permanently added 'vplc02' (RSA) to the list of known hosts. ======================================== RECORD expires: 2016-02-01T12:09:40Z hrn: a.sfa.sl -> 12:09:42 -- + ssh -n -o BatchMode=yes -o StrictHostKeyChecking=no -o CheckHostIP=no -o ConnectTimeout=5 -o UserKnownHostsFile=/dev/null buzzcocks ssh -o BatchMode=yes -o StrictHostKeyChecking=no -o CheckHostIP=no -o ConnectTimeout=5 -o UserKnownHostsFile=/dev/null vplc02 sfi -d /root/sfi -u a.sfa.regular-user renew a.sfa.sl 2016-02-15 Warning: Permanently added 'buzzcocks' (ECDSA) to the list of known hosts. Warning: Permanently added 'vplc02' (RSA) to the list of known hosts. ERROR: : Renew: ['urn:publicid:IDN+a:sfa+slice+sl'] does not exist here * 12:09:43 -- Expecting success=True, got False -> 12:09:43 -- + ssh -n -o BatchMode=yes -o StrictHostKeyChecking=no -o CheckHostIP=no -o ConnectTimeout=5 -o UserKnownHostsFile=/dev/null buzzcocks ssh -o BatchMode=yes -o StrictHostKeyChecking=no -o CheckHostIP=no -o ConnectTimeout=5 -o UserKnownHostsFile=/dev/null vplc02 sfi -d /root/sfi -u a.sfa.regular-user show -k hrn -k expires a.sfa.sl Warning: Permanently added 'buzzcocks' (ECDSA) to the list of known hosts. Warning: Permanently added 'vplc02' (RSA) to the list of known hosts. ======================================== RECORD expires: 2016-02-01T12:09:40Z hrn: a.sfa.sl * 12:09:43 -- ********** 1 SUCCESSFUL step sfa_renew_slice on plctest1_vplc02 TRACE: 1 12-09-40->3s=0:00:03.389571s status=OK step=sfa_renew_slice plc=plctest1_vplc02 force=False * 12:09:43 -- ********** 1 RUNNING step sfa_remove_user_from_slice on plc plctest1_vplc02 -> 12:09:43 -- + ssh -n -o BatchMode=yes -o StrictHostKeyChecking=no -o CheckHostIP=no -o ConnectTimeout=5 -o UserKnownHostsFile=/dev/null buzzcocks ssh -o BatchMode=yes -o StrictHostKeyChecking=no -o CheckHostIP=no -o ConnectTimeout=5 -o UserKnownHostsFile=/dev/null vplc02 sfi -d /root/sfi -u a.sfa.pi-user update -t slice -x a.sfa.sl -r none Warning: Permanently added 'buzzcocks' (ECDSA) to the list of known hosts. Warning: Permanently added 'vplc02' (RSA) to the list of known hosts. * 12:09:44 -- ********** 1 SUCCESSFUL step sfa_remove_user_from_slice on plctest1_vplc02 TRACE: 1 12-09-43->0s=0:00:00.870206s status=OK step=sfa_remove_user_from_slice plc=plctest1_vplc02 force=False * 12:09:44 -- ********** 1 RUNNING step sfi_show_slice_researchers on plc plctest1_vplc02 -> 12:09:44 -- + ssh -n -o BatchMode=yes -o StrictHostKeyChecking=no -o CheckHostIP=no -o ConnectTimeout=5 -o UserKnownHostsFile=/dev/null buzzcocks ssh -o BatchMode=yes -o StrictHostKeyChecking=no -o CheckHostIP=no -o ConnectTimeout=5 -o UserKnownHostsFile=/dev/null vplc02 sfi -d /root/sfi -u a.sfa.pi-user show a.sfa.sl -k researcher -k reg-researchers Warning: Permanently added 'buzzcocks' (ECDSA) to the list of known hosts. Warning: Permanently added 'vplc02' (RSA) to the list of known hosts. ======================================== RECORD reg-researchers: [] researcher: [] * 12:09:45 -- ********** 1 SUCCESSFUL step sfi_show_slice_researchers on plctest1_vplc02 TRACE: 1 12-09-44->0s=0:00:00.669748s status=OK step=sfi_show_slice_researchers plc=plctest1_vplc02 force=False * 12:09:45 -- ********** 1 RUNNING step sfa_insert_user_in_slice on plc plctest1_vplc02 -> 12:09:45 -- + ssh -n -o BatchMode=yes -o StrictHostKeyChecking=no -o CheckHostIP=no -o ConnectTimeout=5 -o UserKnownHostsFile=/dev/null buzzcocks ssh -o BatchMode=yes -o StrictHostKeyChecking=no -o CheckHostIP=no -o ConnectTimeout=5 -o UserKnownHostsFile=/dev/null vplc02 sfi -d /root/sfi -u a.sfa.pi-user update -t slice -x a.sfa.sl -r a.sfa.regular-user Warning: Permanently added 'buzzcocks' (ECDSA) to the list of known hosts. Warning: Permanently added 'vplc02' (RSA) to the list of known hosts. * 12:09:46 -- ********** 1 SUCCESSFUL step sfa_insert_user_in_slice on plctest1_vplc02 TRACE: 1 12-09-45->0s=0:00:00.719947s status=OK step=sfa_insert_user_in_slice plc=plctest1_vplc02 force=False * 12:09:46 -- ********** 1 RUNNING step sfi_show_slice_researchers on plc plctest1_vplc02 -> 12:09:46 -- + ssh -n -o BatchMode=yes -o StrictHostKeyChecking=no -o CheckHostIP=no -o ConnectTimeout=5 -o UserKnownHostsFile=/dev/null buzzcocks ssh -o BatchMode=yes -o StrictHostKeyChecking=no -o CheckHostIP=no -o ConnectTimeout=5 -o UserKnownHostsFile=/dev/null vplc02 sfi -d /root/sfi -u a.sfa.pi-user show a.sfa.sl -k researcher -k reg-researchers Warning: Permanently added 'buzzcocks' (ECDSA) to the list of known hosts. Warning: Permanently added 'vplc02' (RSA) to the list of known hosts. ======================================== RECORD reg-researchers: ['a.sfa.regular-user'] researcher: ['a.sfa.regular-user'] * 12:09:46 -- ********** 1 SUCCESSFUL step sfi_show_slice_researchers on plctest1_vplc02 TRACE: 1 12-09-46->0s=0:00:00.619359s status=OK step=sfi_show_slice_researchers plc=plctest1_vplc02 force=False * 12:09:46 -- ********** 1 RUNNING step sfa_discover on plc plctest1_vplc02 -> 12:09:46 -- + ssh -n -o BatchMode=yes -o StrictHostKeyChecking=no -o CheckHostIP=no -o ConnectTimeout=5 -o UserKnownHostsFile=/dev/null buzzcocks ssh -o BatchMode=yes -o StrictHostKeyChecking=no -o CheckHostIP=no -o ConnectTimeout=5 -o UserKnownHostsFile=/dev/null vplc02 sfi -d /root/sfi -u a.sfa.regular-user resources -r GENI -o /root/sfi/ad.rspec Warning: Permanently added 'buzzcocks' (ECDSA) to the list of known hosts. Warning: Permanently added 'vplc02' (RSA) to the list of known hosts. (Over)wrote /root/sfi/ad.rspec * 12:09:47 -- ********** 1 SUCCESSFUL step sfa_discover on plctest1_vplc02 TRACE: 1 12-09-46->0s=0:00:00.719785s status=OK step=sfa_discover plc=plctest1_vplc02 force=False * 12:09:47 -- ********** 1 RUNNING step sfa_rspec on plc plctest1_vplc02 -> 12:09:47 -- + ssh -n -o BatchMode=yes -o StrictHostKeyChecking=no -o CheckHostIP=no -o ConnectTimeout=5 -o UserKnownHostsFile=/dev/null buzzcocks ssh -o BatchMode=yes -o StrictHostKeyChecking=no -o CheckHostIP=no -o ConnectTimeout=5 -o UserKnownHostsFile=/dev/null vplc02 sfiListNodes.py -i /root/sfi/ad.rspec -o /root/sfi/nodes.txt Warning: Permanently added 'buzzcocks' (ECDSA) to the list of known hosts. Warning: Permanently added 'vplc02' (RSA) to the list of known hosts. -> 12:09:48 -- + ssh -n -o BatchMode=yes -o StrictHostKeyChecking=no -o CheckHostIP=no -o ConnectTimeout=5 -o UserKnownHostsFile=/dev/null buzzcocks ssh -o BatchMode=yes -o StrictHostKeyChecking=no -o CheckHostIP=no -o ConnectTimeout=5 -o UserKnownHostsFile=/dev/null vplc02 sfiAddSliver.py -i /root/sfi/ad.rspec -n /root/sfi/nodes.txt -o /root/sfi/req.rspec Warning: Permanently added 'buzzcocks' (ECDSA) to the list of known hosts. Warning: Permanently added 'vplc02' (RSA) to the list of known hosts. * 12:09:48 -- ********** 1 SUCCESSFUL step sfa_rspec on plctest1_vplc02 TRACE: 1 12-09-47->0s=0:00:00.937938s status=OK step=sfa_rspec plc=plctest1_vplc02 force=False * 12:09:48 -- ********** 1 RUNNING step sfa_allocate on plc plctest1_vplc02 -> 12:09:48 -- + ssh -n -o BatchMode=yes -o StrictHostKeyChecking=no -o CheckHostIP=no -o ConnectTimeout=5 -o UserKnownHostsFile=/dev/null buzzcocks ssh -o BatchMode=yes -o StrictHostKeyChecking=no -o CheckHostIP=no -o ConnectTimeout=5 -o UserKnownHostsFile=/dev/null vplc02 sfi -d /root/sfi -u a.sfa.regular-user allocate a.sfa.sl req.rspec Warning: Permanently added 'buzzcocks' (ECDSA) to the list of known hosts. Warning: Permanently added 'vplc02' (RSA) to the list of known hosts. {'geni_urn': 'urn:publicid:IDN+a:sfa+slice+sl', 'geni_rspec': '\n\n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n\n', 'geni_slivers': [{'geni_sliver_urn': 'urn:publicid:IDN+a+sliver+8-1', 'geni_expires': '2016-02-18T12:09:41Z', 'geni_allocation_status': 'geni_allocated', 'geni_operational_status': 'geni_pending_allocation', 'geni_error': ''}]} * 12:09:49 -- ********** 1 SUCCESSFUL step sfa_allocate on plctest1_vplc02 TRACE: 1 12-09-48->1s=0:00:01.020630s status=OK step=sfa_allocate plc=plctest1_vplc02 force=False * 12:09:49 -- ********** 1 RUNNING step sfa_provision on plc plctest1_vplc02 -> 12:09:49 -- + ssh -n -o BatchMode=yes -o StrictHostKeyChecking=no -o CheckHostIP=no -o ConnectTimeout=5 -o UserKnownHostsFile=/dev/null buzzcocks ssh -o BatchMode=yes -o StrictHostKeyChecking=no -o CheckHostIP=no -o ConnectTimeout=5 -o UserKnownHostsFile=/dev/null vplc02 sfi -d /root/sfi -u a.sfa.regular-user provision a.sfa.sl Warning: Permanently added 'buzzcocks' (ECDSA) to the list of known hosts. Warning: Permanently added 'vplc02' (RSA) to the list of known hosts. {'geni_urn': 'urn:publicid:IDN+a:sfa+slice+sl', 'geni_rspec': '\n\n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n\n', 'geni_slivers': [{'geni_sliver_urn': 'urn:publicid:IDN+a+sliver+8-1', 'geni_expires': '2016-02-18T12:09:41Z', 'geni_allocation_status': 'geni_provisioned', 'geni_operational_status': 'geni_failed', 'geni_error': ''}]} * 12:09:50 -- ********** 1 SUCCESSFUL step sfa_provision on plctest1_vplc02 TRACE: 1 12-09-49->1s=0:00:01.020743s status=OK step=sfa_provision plc=plctest1_vplc02 force=False * 12:09:50 -- ********** 1 RUNNING step sfa_describe on plc plctest1_vplc02 -> 12:09:50 -- + ssh -n -o BatchMode=yes -o StrictHostKeyChecking=no -o CheckHostIP=no -o ConnectTimeout=5 -o UserKnownHostsFile=/dev/null buzzcocks ssh -o BatchMode=yes -o StrictHostKeyChecking=no -o CheckHostIP=no -o ConnectTimeout=5 -o UserKnownHostsFile=/dev/null vplc02 sfi -d /root/sfi -u a.sfa.regular-user describe a.sfa.sl -o /root/sfi/describ.rspec Warning: Permanently added 'buzzcocks' (ECDSA) to the list of known hosts. Warning: Permanently added 'vplc02' (RSA) to the list of known hosts. (Over)wrote /root/sfi/describ.rspec * 12:09:51 -- ********** 1 SUCCESSFUL step sfa_describe on plctest1_vplc02 TRACE: 1 12-09-50->0s=0:00:00.719940s status=OK step=sfa_describe plc=plctest1_vplc02 force=False * 12:09:51 -- ********** 1 RUNNING step sfa_check_slice_plc on plc plctest1_vplc02 * 12:09:51 -- local node vnode02.pl.sophia.inria.fr found in slice sfa_sl * 12:09:51 -- ********** 1 SUCCESSFUL step sfa_check_slice_plc on plctest1_vplc02 TRACE: 1 12-09-51->0s=0:00:00.064730s status=OK step=sfa_check_slice_plc plc=plctest1_vplc02 force=False * 12:09:51 -- ********** 1 RUNNING step sfa_update_slice on plc plctest1_vplc02 -> 12:09:51 -- + ssh -n -o BatchMode=yes -o StrictHostKeyChecking=no -o CheckHostIP=no -o ConnectTimeout=5 -o UserKnownHostsFile=/dev/null buzzcocks ssh -o BatchMode=yes -o StrictHostKeyChecking=no -o CheckHostIP=no -o ConnectTimeout=5 -o UserKnownHostsFile=/dev/null vplc02 sfi -d /root/sfi -u a.sfa.regular-user allocate a.sfa.sl req.rspec Warning: Permanently added 'buzzcocks' (ECDSA) to the list of known hosts. Warning: Permanently added 'vplc02' (RSA) to the list of known hosts. {'geni_urn': 'urn:publicid:IDN+a:sfa+slice+sl', 'geni_rspec': '\n\n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n\n', 'geni_slivers': [{'geni_sliver_urn': 'urn:publicid:IDN+a+sliver+8-1', 'geni_expires': '2016-02-18T12:09:41Z', 'geni_allocation_status': 'geni_allocated', 'geni_operational_status': 'geni_pending_allocation', 'geni_error': ''}]} -> 12:09:52 -- + ssh -n -o BatchMode=yes -o StrictHostKeyChecking=no -o CheckHostIP=no -o ConnectTimeout=5 -o UserKnownHostsFile=/dev/null buzzcocks ssh -o BatchMode=yes -o StrictHostKeyChecking=no -o CheckHostIP=no -o ConnectTimeout=5 -o UserKnownHostsFile=/dev/null vplc02 sfi -d /root/sfi -u a.sfa.regular-user provision a.sfa.sl Warning: Permanently added 'buzzcocks' (ECDSA) to the list of known hosts. Warning: Permanently added 'vplc02' (RSA) to the list of known hosts. {'geni_urn': 'urn:publicid:IDN+a:sfa+slice+sl', 'geni_rspec': '\n\n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n\n', 'geni_slivers': [{'geni_sliver_urn': 'urn:publicid:IDN+a+sliver+8-1', 'geni_expires': '2016-02-18T12:09:41Z', 'geni_allocation_status': 'geni_provisioned', 'geni_operational_status': 'geni_failed', 'geni_error': ''}]} * 12:09:53 -- ********** 1 SUCCESSFUL step sfa_update_slice on plctest1_vplc02 TRACE: 1 12-09-51->2s=0:00:02.042237s status=OK step=sfa_update_slice plc=plctest1_vplc02 force=False * 12:09:53 -- ********** 1 RUNNING step sfi_list on plc plctest1_vplc02 -> 12:09:53 -- + ssh -n -o BatchMode=yes -o StrictHostKeyChecking=no -o CheckHostIP=no -o ConnectTimeout=5 -o UserKnownHostsFile=/dev/null buzzcocks ssh -o BatchMode=yes -o StrictHostKeyChecking=no -o CheckHostIP=no -o ConnectTimeout=5 -o UserKnownHostsFile=/dev/null vplc02 sfi -d /root/sfi -u a.sfa.regular-user list -r a Warning: Permanently added 'buzzcocks' (ECDSA) to the list of known hosts. Warning: Permanently added 'vplc02' (RSA) to the list of known hosts. a (Authority) [PIS a.inri.admin] a.inri (Authority) [PIS a.inri.fake-pi1 and a.inri.fake-pi2] a.sfa (Authority) [PIS a.sfa.pi-user] a (authority+am) a (authority+sa) a (authority+sm) a.inri.vnode02\.pl\.sophia\.inria\.fr (Node) a.inri.sl1 (Slice) [USERS a.inri.fake-pi1 and a.inri.fake-user1 and a.inri.fake-tech2] a.inri.sl2 (Slice) [USERS a.inri.fake-pi1 and a.inri.fake-user1 and a.inri.fake-tech2] a.inri.sl3 (Slice) [USERS a.inri.fake-pi1 and a.inri.fake-user1 and a.inri.fake-tech2] a.sfa.sl (Slice) [USERS a.sfa.regular-user] a.inri.admin (User) [PI at a] [has 1 key] a.inri.fake-pi1 (User) [PI at a.inri] [IN slices a.inri.sl1 and a.inri.sl2 and a.inri.sl3] [has 1 key] a.inri.fake-pi2 (User) [PI at a.inri] [has 1 key] a.inri.fake-tech1 (User) [has 1 key] a.inri.fake-user1 (User) [IN slices a.inri.sl1 and a.inri.sl2 and a.inri.sl3] [has 1 key] a.inri.fake-tech2 (User) [IN slices a.inri.sl1 and a.inri.sl2 and a.inri.sl3] [has 1 key] a.sfa.pi-user (User) [PI at a.sfa] [has 1 key] a.sfa.regular-user (User) [IN slices a.sfa.sl] [has 1 key] -> 12:09:54 -- + ssh -n -o BatchMode=yes -o StrictHostKeyChecking=no -o CheckHostIP=no -o ConnectTimeout=5 -o UserKnownHostsFile=/dev/null buzzcocks ssh -o BatchMode=yes -o StrictHostKeyChecking=no -o CheckHostIP=no -o ConnectTimeout=5 -o UserKnownHostsFile=/dev/null vplc02 sfi -d /root/sfi -u a.sfa.regular-user list a.sfa Warning: Permanently added 'buzzcocks' (ECDSA) to the list of known hosts. Warning: Permanently added 'vplc02' (RSA) to the list of known hosts. a.sfa.sl (Slice) [USERS a.sfa.regular-user] a.sfa.pi-user (User) [PI at a.sfa] [has 1 key] a.sfa.regular-user (User) [IN slices a.sfa.sl] [has 1 key] * 12:09:54 -- ********** 1 SUCCESSFUL step sfi_list on plctest1_vplc02 TRACE: 1 12-09-53->1s=0:00:01.439330s status=OK step=sfi_list plc=plctest1_vplc02 force=False * 12:09:54 -- ********** 1 RUNNING step sfi_show_site on plc plctest1_vplc02 -> 12:09:54 -- + ssh -n -o BatchMode=yes -o StrictHostKeyChecking=no -o CheckHostIP=no -o ConnectTimeout=5 -o UserKnownHostsFile=/dev/null buzzcocks ssh -o BatchMode=yes -o StrictHostKeyChecking=no -o CheckHostIP=no -o ConnectTimeout=5 -o UserKnownHostsFile=/dev/null vplc02 sfi -d /root/sfi -u a.sfa.regular-user show a.sfa Warning: Permanently added 'buzzcocks' (ECDSA) to the list of known hosts. Warning: Permanently added 'vplc02' (RSA) to the list of known hosts. ======================================== RECORD PI: ['a.sfa.pi-user'] abbreviated_name: a.sfa address_ids: [] authority: a classtype: authority date_created: 1453115376 enabled: True ext_consortium_id: None gid: GID hrn:a.sfa urn:urn:publicid:IDN+a:sfa+authority+sa uuid:72033560306148355980073024676048845899 hrn: a.sfa is_public: True last_updated: 1453115376 latitude: None login_base: sfa longitude: None max_slices: 2 max_slivers: 1000 name: a.sfa node_ids: [] nodes: [] operator: [] owner: [] pcu_ids: [] peer_authority: None peer_id: None peer_site_id: None person_ids: [9, 10] persons: ['a.sfa.pi-user', 'a.sfa.regular-user'] pointer: 3 record_id: 16 reg-pis: ['a.sfa.pi-user'] reg-urn: urn:publicid:IDN+a:sfa+authority+sa site: a.sfa site_id: 3 site_tag_ids: [2] slice_ids: [8] slices: ['a.sfa.sl'] type: authority url: None * 12:09:55 -- ********** 1 SUCCESSFUL step sfi_show_site on plctest1_vplc02 TRACE: 1 12-09-54->0s=0:00:00.669367s status=OK step=sfi_show_site plc=plctest1_vplc02 force=False * 12:09:55 -- ********** 1 RUNNING step sfa_utest on plc plctest1_vplc02 -> 12:09:55 -- + ssh -n -o BatchMode=yes -o StrictHostKeyChecking=no -o CheckHostIP=no -o ConnectTimeout=5 -o UserKnownHostsFile=/dev/null buzzcocks ssh -o BatchMode=yes -o StrictHostKeyChecking=no -o CheckHostIP=no -o ConnectTimeout=5 -o UserKnownHostsFile=/dev/null vplc02 yum -y install sfa-tests Warning: Permanently added 'buzzcocks' (ECDSA) to the list of known hosts. Warning: Permanently added 'vplc02' (RSA) to the list of known hosts. Failed to set locale, defaulting to C Setting up Install Process Resolving Dependencies --> Running transaction check ---> Package sfa-tests.x86_64 0:3.1-20.onelab.2016.01.18 set to be installed --> Finished Dependency Resolution Dependencies Resolved ================================================================================ Package Arch Version Repository Size ================================================================================ Installing: sfa-tests x86_64 3.1-20.onelab.2016.01.18 myplc 62 k Transaction Summary ================================================================================ Install 1 Package(s) Total download size: 62 k Installed size: 92 k Downloading Packages: Running rpm_check_debug Running Transaction Test Transaction Test Succeeded Running Transaction Installing : sfa-tests-3.1-20.onelab.2016.01.18.x86_64 1/1 Installed: sfa-tests.x86_64 0:3.1-20.onelab.2016.01.18 Complete! -> 12:09:57 -- + ssh -n -o BatchMode=yes -o StrictHostKeyChecking=no -o CheckHostIP=no -o ConnectTimeout=5 -o UserKnownHostsFile=/dev/null buzzcocks ssh -o BatchMode=yes -o StrictHostKeyChecking=no -o CheckHostIP=no -o ConnectTimeout=5 -o UserKnownHostsFile=/dev/null vplc02 rpm -q sfa-tests Warning: Permanently added 'buzzcocks' (ECDSA) to the list of known hosts. Warning: Permanently added 'vplc02' (RSA) to the list of known hosts. sfa-tests-3.1-20.onelab.2016.01.18.x86_64 -> 12:09:57 -- + ssh -n -o BatchMode=yes -o StrictHostKeyChecking=no -o CheckHostIP=no -o ConnectTimeout=5 -o UserKnownHostsFile=/dev/null buzzcocks ssh -o BatchMode=yes -o StrictHostKeyChecking=no -o CheckHostIP=no -o ConnectTimeout=5 -o UserKnownHostsFile=/dev/null vplc02 /usr/share/sfa/tests/testAll.py Warning: Permanently added 'buzzcocks' (ECDSA) to the list of known hosts. Warning: Permanently added 'vplc02' (RSA) to the list of known hosts. ........................ 1 ---------------------------------------------------------------------- Ran 24 tests in 0.567s OK * 12:09:58 -- ********** 1 SUCCESSFUL step sfa_utest on plctest1_vplc02 TRACE: 1 12-09-55->3s=0:00:03.162435s status=OK step=sfa_utest plc=plctest1_vplc02 force=False * 12:09:58 -- ********** 1 RUNNING step probe_kvm_iptables on plc plctest1_vplc02 -> 12:09:58 -- + ssh -n -o BatchMode=yes -o StrictHostKeyChecking=no -o CheckHostIP=no -o ConnectTimeout=5 -o UserKnownHostsFile=/dev/null boxtops iptables-save ssh: connect to host boxtops port 22: Connection timed out * 12:10:03 -- ********** 1 SUCCESSFUL step probe_kvm_iptables on plctest1_vplc02 TRACE: 1 12-09-58->5s=0:00:05.030096s status=OK step=probe_kvm_iptables plc=plctest1_vplc02 force=False * 12:10:03 -- ********** 1 RUNNING step ping_node on plc plctest1_vplc02 * 12:10:03 -- Completer [1 tasks]: max timeout is 60.0 seconds, silent for 60.0 seconds (period is 10 s) . total completer (ping_node) 0s * 12:10:03 -- ********** 1 SUCCESSFUL step ping_node on plctest1_vplc02 TRACE: 1 12-10-03->0s=0:00:00.018233s status=OK step=ping_node plc=plctest1_vplc02 force=False * 12:10:03 -- ********** 1 RUNNING step ssh_node_debug on plc plctest1_vplc02 * 12:10:03 -- checking ssh access to nodes (expected in debug mode) * 12:10:03 -- Completer [1 tasks]: max timeout is 10.0 minutes, silent for 8.0 minutes (period is 15 s) . vnode02.pl.sophia.inria.fr Linux vnode02.pl.sophia.inria.fr 2.6.32-36.onelab.x86_64 #1 SMP Mon Jan 18 10:49:25 CET 2016 x86_64 x86_64 x86_64 GNU/Linux total completer (ssh_node_debug) 0s * 12:10:03 -- ********** 1 SUCCESSFUL step ssh_node_debug on plctest1_vplc02 TRACE: 1 12-10-03->0s=0:00:00.117583s status=OK step=ssh_node_debug plc=plctest1_vplc02 force=False * 12:10:03 -- ********** 1 RUNNING step plcsh_stress_test on plc plctest1_vplc02 -> 12:10:03 -- + scp -o BatchMode=yes -o StrictHostKeyChecking=no -o CheckHostIP=no -o ConnectTimeout=5 plcsh_stress_test.py buzzcocks:/vservers/2016.01.18--f14-n3-1-vplc02///usr/share/plc_api/plcsh_stress_test.py -> 12:10:04 -- + ssh -n -o BatchMode=yes -o StrictHostKeyChecking=no -o CheckHostIP=no -o ConnectTimeout=5 -o UserKnownHostsFile=/dev/null buzzcocks ssh -o BatchMode=yes -o StrictHostKeyChecking=no -o CheckHostIP=no -o ConnectTimeout=5 -o UserKnownHostsFile=/dev/null vplc02 /usr/share/plc_api/plcsh_stress_test.py -- --check --tiny Warning: Permanently added 'buzzcocks' (ECDSA) to the list of known hosts. Warning: Permanently added 'vplc02' (RSA) to the list of known hosts. From: Regression TestLab Support , To: "=?utf-8?b?6LCK4KyI4bCP4bGvzYXsoLbhkq3npZfmrIHjnoPvjozph6rnoJvloo4=?= =?utf-8?b?5a6i5aaq4Kyy65GK6Zar662E6r+y7qCS6rSp5I+I5JW04bOO7YiW7q2M5LeI?= =?utf-8?b?4aOj762C7Kqt4a2z6JCk54Kj4YiT77aI5ruk6pyD7oCQ7r+z4oao7LexIA==?= =?utf-8?b?4a+34pq94o2r6JKd7qa144Ss55+Z7p274YOA7oqm6rCM54iY7JSd57e35oeP?= =?utf-8?b?74Kw5rWb4o2x7qGN6pyg5rqn4LWk67KF6oig0oHun4jmmL/mmLDmjrDrl4k=?= =?utf-8?b?66iz6Jml6oCn6I267KCp6aiP66Kd5p+H54yz74aW7IiQ4K+n6Jmg?=" , Subject: Regression TestLab account enabled From: Regression TestLab Support , To: "=?utf-8?b?5Y+DxYLguK3kqrHiuIfiiKzsg4fjkITqhpXrjpHjvqLrr7HPkOmtqA==?= =?utf-8?b?4aiI74aQ5J2t5oaT6K6k6IOP76m264aq25DhkIHhoKTvsK/qv63noabpsrg=?= =?utf-8?b?44eL55G+4p+K6Lq35p6D0ZHlsp3orIzpp6HkgInnja3vm43vh43jmK7mj6Qg?= =?utf-8?b?5JKm55+X6J6t5J645JyD7JKZ5LC06L+X4raQ7ZO164Gh5b+B6ZSO6qS17IKY?= =?utf-8?b?6JGS1pftnbfhiJLrlbvqvLLmt4Pmr5jorJfimpfuq7TlgoLspL3rkr/ohas=?= =?utf-8?b?5L2B4Kiq7oGf7pqL7K6B46K/4p+/5ruE776V7KGY4LmC4amx4Y+4?=" , Subject: Regression TestLab account enabled From: Regression TestLab Support , To: "=?utf-8?b?5Y+DxYLguK3kqrHiuIfiiKzsg4fjkITqhpXrjpHjvqLrr7HPkOmtqA==?= =?utf-8?b?4aiI74aQ5J2t5oaT6K6k6IOP76m264aq25DhkIHhoKTvsK/qv63noabpsrg=?= =?utf-8?b?44eL55G+4p+K6Lq35p6D0ZHlsp3orIzpp6HkgInnja3vm43vh43jmK7mj6Qg?= =?utf-8?b?5JKm55+X6J6t5J645JyD7JKZ5LC06L+X4raQ7ZO164Gh5b+B6ZSO6qS17IKY?= =?utf-8?b?6JGS1pftnbfhiJLrlbvqvLLmt4Pmr5jorJfimpfuq7TlgoLspL3rkr/ohas=?= =?utf-8?b?5L2B4Kiq7oGf7pqL7K6B46K/4p+/5ruE776V7KGY4LmC4amx4Y+4?=" , Subject: Regression TestLab account disabled Cardinals before test (n,s,p,sl) [1, 3, 10, 8] nl[a] in random_site 50 actual 50 Added site 4 Added address type 4 Added address 2 to site 4 Added user 11 to site 4 Added key 11 to user 11 Created tag type 118 Created tag type 119 Created tag type 120 Added node group 2 Added node 2 Added interface 2 to node 2 Added Ilink 1 - attached interface 2 to 2 Added PCU 1 to site 4 Added configuration file 27 Added configuration file 28 to node group 2 Added configuration file 29 to node 2 Added slice 9 to site 4 and nodes [2L] Added slice attribute 61 of type 118 nl[a] in random_site 50 actual 50 Updated site 4 Updated address_type 4 Updated address 2 Updated person 11 Updated person 11 to sites [4L] Updated key 10 Updated tag type 118 Updated tag type 119 Updated tag type 120 Updated node group 2 Updated node 2 Updated interface 2 Updated Ilink 1 Updated PCU 1 Updated configuration file 27 Updated configuration file 28 Updated configuration file 29 Updated slice 9 Added nodes [] to slice 9 Added persons [] to slice 9 Updated slice attribute 61 Deleted slice attribute 61 Deleted slice 9 Deleted key 10 Deleted configuration file 27 Deleted configuration file 28 Deleted configuration file 29 Deleted PCU 1 Deleted Ilink 1 Deleted interface 2 Deleted node 2 Deleted user 11 Deleted node group 2 Deleted tag type 118 Deleted tag type 119 Deleted tag type 120 Deleted address 2 Deleted address type 4 Deleted site 4 Cardinals after test (n,s,p,sl) [1, 3, 10, 8] * 12:10:05 -- ********** 1 SUCCESSFUL step plcsh_stress_test on plctest1_vplc02 TRACE: 1 12-10-03->1s=0:00:01.989510s status=OK step=plcsh_stress_test plc=plctest1_vplc02 force=False * 12:10:05 -- ********** 1 RUNNING step ssh_node_boot on plc plctest1_vplc02 * 12:10:05 -- checking ssh access to nodes (expected in boot mode) * 12:10:05 -- Completer [1 tasks]: max timeout is 40.0 minutes, silent for 38.0 minutes (period is 15 s) . 15s.. . 15s.. . 15s.. . 15s.. . 15s.. . 15s.. . 15s.. . 15s.. . 15s.. . 15s.. . 15s.. . vnode02.pl.sophia.inria.fr Linux vnode02.pl.sophia.inria.fr 2.6.32-36.onelab.x86_64 #1 SMP Mon Jan 18 10:49:25 CET 2016 x86_64 x86_64 x86_64 GNU/Linux total completer (ssh_node_boot) 194s * 12:13:20 -- ********** 1 SUCCESSFUL step ssh_node_boot on plctest1_vplc02 TRACE: 1 12-10-05->194s=0:03:14.296988s status=OK step=ssh_node_boot plc=plctest1_vplc02 force=False * 12:13:20 -- ********** 1 RUNNING step node_bmlogs on plc plctest1_vplc02 -> 12:13:20 -- + ssh -n -o BatchMode=yes -o StrictHostKeyChecking=no -o CheckHostIP=no -o ConnectTimeout=5 -o UserKnownHostsFile=/dev/null buzzcocks ssh -o BatchMode=yes -o StrictHostKeyChecking=no -o CheckHostIP=no -o ConnectTimeout=5 -o UserKnownHostsFile=/dev/null vplc02 ls /var/log/bm/raw Warning: Permanently added 'buzzcocks' (ECDSA) to the list of known hosts. Warning: Permanently added 'vplc02' (RSA) to the list of known hosts. 2016-01-18-11-12-vnode02.pl.sophia.inria.fr-138.96.112.102.txt * 12:13:20 -- ********** 1 SUCCESSFUL step node_bmlogs on plctest1_vplc02 TRACE: 1 12-13-20->0s=0:00:00.368620s status=OK step=node_bmlogs plc=plctest1_vplc02 force=False * 12:13:20 -- ********** 1 RUNNING step ssh_slice on plc plctest1_vplc02 * 12:13:20 -- checking for ssh slice access enabled -- slice inri_sl1 * 12:13:20 -- checking for ssh slice access enabled -- slice inri_sl2 * 12:13:20 -- checking for ssh slice access enabled -- slice inri_sl3 * 12:13:20 -- Completer [3 tasks]: max timeout is 20.0 minutes, silent for 10.0 minutes (period is 15 s) . hostname vnode02.pl.sophia.inria.fr id uid=503(inri_sl1) gid=503(slices) groups=503(slices) uname -a Linux vnode02.pl.sophia.inria.fr 2.6.32-36.onelab.x86_64 #1 SMP Mon Jan 18 10:49:25 CET 2016 x86_64 x86_64 x86_64 GNU/Linux . hostname vnode02.pl.sophia.inria.fr id uid=504(inri_sl2) gid=503(slices) groups=503(slices) uname -a Linux vnode02.pl.sophia.inria.fr 2.6.32-36.onelab.x86_64 #1 SMP Mon Jan 18 10:49:25 CET 2016 x86_64 x86_64 x86_64 GNU/Linux . 15s.. . hostname vnode02.pl.sophia.inria.fr id uid=505(inri_sl3) gid=503(slices) groups=503(slices) uname -a Linux vnode02.pl.sophia.inria.fr 2.6.32-36.onelab.x86_64 #1 SMP Mon Jan 18 10:49:25 CET 2016 x86_64 x86_64 x86_64 GNU/Linux total completer (ssh_slice) 16s * 12:13:36 -- ********** 1 SUCCESSFUL step ssh_slice on plctest1_vplc02 TRACE: 1 12-13-20->16s=0:00:16.336762s status=OK step=ssh_slice plc=plctest1_vplc02 force=False * 12:13:36 -- ********** 1 RUNNING step ssh_slice_basics on plc plctest1_vplc02 * 12:13:36 -- checking true to return TRUE from ssh -- slice inri_sl1 on node vnode02.pl.sophia.inria.fr . * 12:13:37 -- checking false to return FALSE from ssh -- slice inri_sl1 on node vnode02.pl.sophia.inria.fr . * 12:13:37 -- checking someimprobablecommandname to return FALSE from ssh -- slice inri_sl1 on node vnode02.pl.sophia.inria.fr . * 12:13:37 -- checking ps to return TRUE from ssh -- slice inri_sl1 on node vnode02.pl.sophia.inria.fr . PID TTY TIME CMD 7086 ? 00:00:00 ps * 12:13:37 -- checking ls /vservers to return FALSE from ssh -- slice inri_sl1 on node vnode02.pl.sophia.inria.fr . * 12:13:37 -- checking true to return TRUE from ssh -- slice inri_sl2 on node vnode02.pl.sophia.inria.fr . * 12:13:38 -- checking false to return FALSE from ssh -- slice inri_sl2 on node vnode02.pl.sophia.inria.fr . * 12:13:38 -- checking someimprobablecommandname to return FALSE from ssh -- slice inri_sl2 on node vnode02.pl.sophia.inria.fr . * 12:13:38 -- checking ps to return TRUE from ssh -- slice inri_sl2 on node vnode02.pl.sophia.inria.fr . PID TTY TIME CMD 7321 ? 00:00:00 ps * 12:13:38 -- checking ls /vservers to return FALSE from ssh -- slice inri_sl2 on node vnode02.pl.sophia.inria.fr . * 12:13:39 -- checking true to return TRUE from ssh -- slice inri_sl3 on node vnode02.pl.sophia.inria.fr . * 12:13:39 -- checking false to return FALSE from ssh -- slice inri_sl3 on node vnode02.pl.sophia.inria.fr . * 12:13:39 -- checking someimprobablecommandname to return FALSE from ssh -- slice inri_sl3 on node vnode02.pl.sophia.inria.fr . * 12:13:39 -- checking ps to return TRUE from ssh -- slice inri_sl3 on node vnode02.pl.sophia.inria.fr . PID TTY TIME CMD 7740 ? 00:00:00 ps * 12:13:40 -- checking ls /vservers to return FALSE from ssh -- slice inri_sl3 on node vnode02.pl.sophia.inria.fr . * 12:13:40 -- ********** 1 SUCCESSFUL step ssh_slice_basics on plctest1_vplc02 TRACE: 1 12-13-36->3s=0:00:03.632040s status=OK step=ssh_slice_basics plc=plctest1_vplc02 force=False * 12:13:40 -- ********** 1 RUNNING step check_initscripts on plc plctest1_vplc02 nodename node1 slicename inri_sl1 stamp initscript_by_code nodename node1 slicename inri_sl2 stamp initscript_by_name * 12:13:40 -- Completer [2 tasks]: max timeout is 5.0 minutes, silent for 4.0 minutes (period is 10 s) * 12:13:40 -- Checking for initscript stamp initscript_by_code on sliver inri_sl1@vnode02.pl.sophia.inria.fr -> 12:13:40 -- + ssh -n -o BatchMode=yes -o StrictHostKeyChecking=no -o CheckHostIP=no -o ConnectTimeout=5 -o UserKnownHostsFile=/dev/null -i keys/key_user.rsa inri_sl1@vnode02.pl.sophia.inria.fr ls -l /var/tmp/initscript_by_code.stamp Warning: Permanently added 'vnode02.pl.sophia.inria.fr' (RSA) to the list of known hosts. -rw-r--r-- 1 root root 125 Jan 18 11:13 /var/tmp/initscript_by_code.stamp + * 12:13:40 -- Checking for initscript stamp initscript_by_name on sliver inri_sl2@vnode02.pl.sophia.inria.fr -> 12:13:40 -- + ssh -n -o BatchMode=yes -o StrictHostKeyChecking=no -o CheckHostIP=no -o ConnectTimeout=5 -o UserKnownHostsFile=/dev/null -i keys/key_user.rsa inri_sl2@vnode02.pl.sophia.inria.fr ls -l /var/tmp/initscript_by_name.stamp Warning: Permanently added 'vnode02.pl.sophia.inria.fr' (RSA) to the list of known hosts. -rw-r--r-- 1 root root 125 Jan 18 11:13 /var/tmp/initscript_by_name.stamp + total completer (check_initscripts) 0s * 12:13:40 -- ********** 1 SUCCESSFUL step check_initscripts on plctest1_vplc02 TRACE: 1 12-13-40->0s=0:00:00.435568s status=OK step=check_initscripts plc=plctest1_vplc02 force=False * 12:13:40 -- ********** 1 RUNNING step ssh_slice_sfa on plc plctest1_vplc02 * 12:13:40 -- Completer [1 tasks]: max timeout is 40.0 minutes, silent for 0.0 minutes (period is 15 s) -> 12:13:40 -- + ssh -n -o BatchMode=yes -o StrictHostKeyChecking=no -o CheckHostIP=no -o ConnectTimeout=5 -o UserKnownHostsFile=/dev/null -i keys/key_sfauser.rsa sfa_sl@vnode02.pl.sophia.inria.fr echo hostname ';' 'hostname;' echo 'id;' 'id;' echo uname -a ';' uname -a Warning: Permanently added 'vnode02.pl.sophia.inria.fr' (RSA) to the list of known hosts. hostname vnode02.pl.sophia.inria.fr id uid=510(sfa_sl) gid=503(slices) groups=503(slices) uname -a Linux vnode02.pl.sophia.inria.fr 2.6.32-36.onelab.x86_64 #1 SMP Mon Jan 18 10:49:25 CET 2016 x86_64 x86_64 x86_64 GNU/Linux total completer (ssh_slice_sfa) 0s * 12:13:41 -- ********** 1 SUCCESSFUL step ssh_slice_sfa on plctest1_vplc02 TRACE: 1 12-13-40->0s=0:00:00.217721s status=OK step=ssh_slice_sfa plc=plctest1_vplc02 force=False * 12:13:41 -- ********** 1 RUNNING step sfa_rspec_empty on plc plctest1_vplc02 -> 12:13:41 -- + scp -o BatchMode=yes -o StrictHostKeyChecking=no -o CheckHostIP=no -o ConnectTimeout=5 empty-rspec.xml buzzcocks:/vservers/2016.01.18--f14-n3-1-vplc02///root/sfi * 12:13:41 -- ********** 1 SUCCESSFUL step sfa_rspec_empty on plctest1_vplc02 TRACE: 1 12-13-41->0s=0:00:00.267315s status=OK step=sfa_rspec_empty plc=plctest1_vplc02 force=False * 12:13:41 -- ********** 1 RUNNING step sfa_allocate_empty on plc plctest1_vplc02 -> 12:13:41 -- + ssh -n -o BatchMode=yes -o StrictHostKeyChecking=no -o CheckHostIP=no -o ConnectTimeout=5 -o UserKnownHostsFile=/dev/null buzzcocks ssh -o BatchMode=yes -o StrictHostKeyChecking=no -o CheckHostIP=no -o ConnectTimeout=5 -o UserKnownHostsFile=/dev/null vplc02 sfi -d /root/sfi -u a.sfa.regular-user allocate a.sfa.sl empty-rspec.xml Warning: Permanently added 'buzzcocks' (ECDSA) to the list of known hosts. Warning: Permanently added 'vplc02' (RSA) to the list of known hosts. {'geni_urn': 'urn:publicid:IDN+a:sfa+slice+sl', 'geni_rspec': '\n\n', 'geni_slivers': []} * 12:13:42 -- ********** 1 SUCCESSFUL step sfa_allocate_empty on plctest1_vplc02 TRACE: 1 12-13-41->0s=0:00:00.970638s status=OK step=sfa_allocate_empty plc=plctest1_vplc02 force=False * 12:13:42 -- ********** 1 RUNNING step sfa_provision_empty on plc plctest1_vplc02 -> 12:13:42 -- + ssh -n -o BatchMode=yes -o StrictHostKeyChecking=no -o CheckHostIP=no -o ConnectTimeout=5 -o UserKnownHostsFile=/dev/null buzzcocks ssh -o BatchMode=yes -o StrictHostKeyChecking=no -o CheckHostIP=no -o ConnectTimeout=5 -o UserKnownHostsFile=/dev/null vplc02 sfi -d /root/sfi -u a.sfa.regular-user provision a.sfa.sl Warning: Permanently added 'buzzcocks' (ECDSA) to the list of known hosts. Warning: Permanently added 'vplc02' (RSA) to the list of known hosts. {'geni_urn': 'urn:publicid:IDN+a:sfa+slice+sl', 'geni_rspec': '\n\n', 'geni_slivers': []} * 12:13:43 -- ********** 1 SUCCESSFUL step sfa_provision_empty on plctest1_vplc02 TRACE: 1 12-13-42->0s=0:00:00.920278s status=OK step=sfa_provision_empty plc=plctest1_vplc02 force=False * 12:13:43 -- ********** 1 RUNNING step sfa_check_slice_plc_empty on plc plctest1_vplc02 * 12:13:43 -- ********** 1 SUCCESSFUL step sfa_check_slice_plc_empty on plctest1_vplc02 TRACE: 1 12-13-43->0s=0:00:00.031208s status=OK step=sfa_check_slice_plc_empty plc=plctest1_vplc02 force=False * 12:13:43 -- ********** 1 RUNNING step sfa_delete_slice on plc plctest1_vplc02 -> 12:13:43 -- + ssh -n -o BatchMode=yes -o StrictHostKeyChecking=no -o CheckHostIP=no -o ConnectTimeout=5 -o UserKnownHostsFile=/dev/null buzzcocks ssh -o BatchMode=yes -o StrictHostKeyChecking=no -o CheckHostIP=no -o ConnectTimeout=5 -o UserKnownHostsFile=/dev/null vplc02 sfi -d /root/sfi -u a.sfa.pi-user delete a.sfa.sl Warning: Permanently added 'buzzcocks' (ECDSA) to the list of known hosts. Warning: Permanently added 'vplc02' (RSA) to the list of known hosts. [] -> 12:13:43 -- + ssh -n -o BatchMode=yes -o StrictHostKeyChecking=no -o CheckHostIP=no -o ConnectTimeout=5 -o UserKnownHostsFile=/dev/null buzzcocks ssh -o BatchMode=yes -o StrictHostKeyChecking=no -o CheckHostIP=no -o ConnectTimeout=5 -o UserKnownHostsFile=/dev/null vplc02 sfi -d /root/sfi -u a.sfa.pi-user remove -t slice a.sfa.sl Warning: Permanently added 'buzzcocks' (ECDSA) to the list of known hosts. Warning: Permanently added 'vplc02' (RSA) to the list of known hosts. * 12:13:44 -- ********** 1 SUCCESSFUL step sfa_delete_slice on plctest1_vplc02 TRACE: 1 12-13-43->1s=0:00:01.388994s status=OK step=sfa_delete_slice plc=plctest1_vplc02 force=False * 12:13:44 -- ********** 1 RUNNING step sfa_delete_user on plc plctest1_vplc02 -> 12:13:44 -- + ssh -n -o BatchMode=yes -o StrictHostKeyChecking=no -o CheckHostIP=no -o ConnectTimeout=5 -o UserKnownHostsFile=/dev/null buzzcocks ssh -o BatchMode=yes -o StrictHostKeyChecking=no -o CheckHostIP=no -o ConnectTimeout=5 -o UserKnownHostsFile=/dev/null vplc02 sfi -d /root/sfi -u a.sfa.pi-user remove -t user a.sfa.regular-user Warning: Permanently added 'buzzcocks' (ECDSA) to the list of known hosts. Warning: Permanently added 'vplc02' (RSA) to the list of known hosts. * 12:13:45 -- ********** 1 SUCCESSFUL step sfa_delete_user on plctest1_vplc02 TRACE: 1 12-13-44->0s=0:00:00.669615s status=OK step=sfa_delete_user plc=plctest1_vplc02 force=False * 12:13:45 -- ********** 1 RUNNING step cross_check_tcp on plc plctest1_vplc02 * 12:13:45 -- Will check TCP between s=inri_sl1@vnode02.pl.sophia.inria.fr and c=inri_sl1@vnode02.pl.sophia.inria.fr * 12:13:45 -- Will check TCP between s=inri_sl1@vnode02.pl.sophia.inria.fr and c=inri_sl2@vnode02.pl.sophia.inria.fr * 12:13:45 -- Completer [2 tasks]: max timeout is 30.0 seconds, silent for 24.0 seconds (period is 5 s) -> 12:13:45 -- + scp -o BatchMode=yes -o StrictHostKeyChecking=no -o CheckHostIP=no -o ConnectTimeout=5 -i keys/key_user.rsa tcptest.py inri_sl1@vnode02.pl.sophia.inria.fr:./tcptest.py Warning: Permanently added 'vnode02.pl.sophia.inria.fr' (RSA) to the list of known hosts. -> 12:13:45 -- + ssh -n -o BatchMode=yes -o StrictHostKeyChecking=no -o CheckHostIP=no -o ConnectTimeout=5 -o UserKnownHostsFile=/dev/null -i keys/key_user.rsa inri_sl1@vnode02.pl.sophia.inria.fr ./tcptest.py ready -p 9999 Warning: Permanently added 'vnode02.pl.sophia.inria.fr' (RSA) to the list of known hosts. * 11:13:45 (ready) -- ==================== tcptest.py ready + -> 12:13:45 -- + scp -o BatchMode=yes -o StrictHostKeyChecking=no -o CheckHostIP=no -o ConnectTimeout=5 -i keys/key_user.rsa tcptest.py inri_sl2@vnode02.pl.sophia.inria.fr:./tcptest.py -> 12:13:46 -- + ssh -n -o BatchMode=yes -o StrictHostKeyChecking=no -o CheckHostIP=no -o ConnectTimeout=5 -o UserKnownHostsFile=/dev/null -i keys/key_user.rsa inri_sl2@vnode02.pl.sophia.inria.fr ./tcptest.py ready -p 9999 Warning: Permanently added 'vnode02.pl.sophia.inria.fr' (RSA) to the list of known hosts. * 11:13:45 (ready) -- ==================== tcptest.py ready + total completer (check for network readiness in slivers) 1s -> 12:13:46 -- + scp -o BatchMode=yes -o StrictHostKeyChecking=no -o CheckHostIP=no -o ConnectTimeout=5 -i keys/key_user.rsa tcptest.py inri_sl1@vnode02.pl.sophia.inria.fr:./tcptest.py -> 12:13:46 -- + ssh -n -o BatchMode=yes -o StrictHostKeyChecking=no -o CheckHostIP=no -o ConnectTimeout=5 -o UserKnownHostsFile=/dev/null -i keys/key_user.rsa inri_sl1@vnode02.pl.sophia.inria.fr ./tcptest.py server -p 10001 -t 20 -> 12:13:46 -- + scp -o BatchMode=yes -o StrictHostKeyChecking=no -o CheckHostIP=no -o ConnectTimeout=5 -i keys/key_user.rsa tcptest.py inri_sl1@vnode02.pl.sophia.inria.fr:./tcptest.py Warning: Permanently added 'vnode02.pl.sophia.inria.fr' (RSA) to the list of known hosts. -> 12:13:47 -- + ssh -n -o BatchMode=yes -o StrictHostKeyChecking=no -o CheckHostIP=no -o ConnectTimeout=5 -o UserKnownHostsFile=/dev/null -i keys/key_user.rsa inri_sl1@vnode02.pl.sophia.inria.fr ./tcptest.py client -a vnode02.pl.sophia.inria.fr -p 10001 Warning: Permanently added 'vnode02.pl.sophia.inria.fr' (RSA) to the list of known hosts. * 11:13:46 (server) -- ==================== tcptest.py server * 11:13:46 (server) -- ip address show 1: lo: mtu 16436 qdisc noqueue state UNKNOWN link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 inet 127.0.0.1/8 scope host lo 2: eth0: mtu 1500 qdisc htb state UP qlen 1000 link/ether 02:34:56:00:00:02 brd ff:ff:ff:ff:ff:ff inet 138.96.112.102/21 brd 138.96.119.255 scope global eth0 * 11:13:46 (server) -- ip route show 138.96.112.0/21 dev eth0 proto kernel scope link src 138.96.112.102 169.254.0.0/16 dev eth0 scope link metric 1002 default via 138.96.112.250 dev eth0 * 11:13:46 (client) -- ==================== tcptest.py client * 11:13:46 (client) -- OK:ping * 11:13:46 (client) -- disconnecting * 11:13:46 (client) -- Done -> 12:13:47 -- + scp -o BatchMode=yes -o StrictHostKeyChecking=no -o CheckHostIP=no -o ConnectTimeout=5 -i keys/key_user.rsa tcptest.py inri_sl1@vnode02.pl.sophia.inria.fr:./tcptest.py -> 12:13:47 -- + ssh -n -o BatchMode=yes -o StrictHostKeyChecking=no -o CheckHostIP=no -o ConnectTimeout=5 -o UserKnownHostsFile=/dev/null -i keys/key_user.rsa inri_sl1@vnode02.pl.sophia.inria.fr ./tcptest.py server -p 10002 -t 20 -> 12:13:47 -- + scp -o BatchMode=yes -o StrictHostKeyChecking=no -o CheckHostIP=no -o ConnectTimeout=5 -i keys/key_user.rsa tcptest.py inri_sl2@vnode02.pl.sophia.inria.fr:./tcptest.py Warning: Permanently added 'vnode02.pl.sophia.inria.fr' (RSA) to the list of known hosts. -> 12:13:47 -- + ssh -n -o BatchMode=yes -o StrictHostKeyChecking=no -o CheckHostIP=no -o ConnectTimeout=5 -o UserKnownHostsFile=/dev/null -i keys/key_user.rsa inri_sl2@vnode02.pl.sophia.inria.fr ./tcptest.py client -a vnode02.pl.sophia.inria.fr -p 10002 Warning: Permanently added 'vnode02.pl.sophia.inria.fr' (RSA) to the list of known hosts. * 11:13:47 (server) -- ==================== tcptest.py server * 11:13:47 (server) -- ip address show 1: lo: mtu 16436 qdisc noqueue state UNKNOWN link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 inet 127.0.0.1/8 scope host lo 2: eth0: mtu 1500 qdisc htb state UP qlen 1000 link/ether 02:34:56:00:00:02 brd ff:ff:ff:ff:ff:ff inet 138.96.112.102/21 brd 138.96.119.255 scope global eth0 * 11:13:47 (server) -- ip route show 138.96.112.0/21 dev eth0 proto kernel scope link src 138.96.112.102 169.254.0.0/16 dev eth0 scope link metric 1002 default via 138.96.112.250 dev eth0 * 11:13:47 (client) -- ==================== tcptest.py client * 11:13:47 (client) -- OK:ping * 11:13:47 (client) -- disconnecting * 11:13:47 (client) -- Done * 12:13:48 -- ********** 1 SUCCESSFUL step cross_check_tcp on plctest1_vplc02 TRACE: 1 12-13-45->2s=0:00:02.996018s status=OK step=cross_check_tcp plc=plctest1_vplc02 force=False * 12:13:48 -- ********** 1 RUNNING step check_system_slice on plc plctest1_vplc02 * 12:13:48 -- Completer [1 tasks]: max timeout is 5.0 minutes, silent for 0.0 minutes (period is 15 s) -> 12:13:48 -- + ssh -n -o BatchMode=yes -o StrictHostKeyChecking=no -o CheckHostIP=no -o ConnectTimeout=5 -o UserKnownHostsFile=/dev/null -i keys/key_admin.rsa vnode02.pl.sophia.inria.fr rpm -q --quiet libvirt-client Warning: Permanently added 'vnode02.pl.sophia.inria.fr' (RSA) to the list of known hosts. * 12:13:48 -- Found slicefamily 'planetflow-f14-x86_64'for slice netflow * 12:13:48 -- Checking system slice netflow using vserver-stat -> 12:13:48 -- + ssh -n -o BatchMode=yes -o StrictHostKeyChecking=no -o CheckHostIP=no -o ConnectTimeout=5 -o UserKnownHostsFile=/dev/null -i keys/key_admin.rsa vnode02.pl.sophia.inria.fr vserver-stat '|' grep auto_netflow Warning: Permanently added 'vnode02.pl.sophia.inria.fr' (RSA) to the list of known hosts. 509 3 30.5M 3.5M 0m00s06 0m00s08 0m14s58 auto_netflow System slice netflow @ vnode02.pl.sophia.inria.fr -> OK total completer (_check_system_slice) 0s * 12:13:48 -- ********** 1 SUCCESSFUL step check_system_slice on plctest1_vplc02 TRACE: 1 12-13-48->0s=0:00:00.382774s status=OK step=check_system_slice plc=plctest1_vplc02 force=False * 12:13:48 -- ********** 1 RUNNING step debug_nodemanager on plc plctest1_vplc02 -> 12:13:48 -- + scp -o BatchMode=yes -o StrictHostKeyChecking=no -o CheckHostIP=no -o ConnectTimeout=5 plctest1_vplc02.2016.01.18--f14-n3-1-vplc02.nodemanager buzzcocks:/vservers/2016.01.18--f14-n3-1-vplc02///var/www/html/PlanetLabConf/nodemanager * 12:13:48 -- ********** 1 SUCCESSFUL step debug_nodemanager on plctest1_vplc02 TRACE: 1 12-13-48->0s=0:00:00.267974s status=OK step=debug_nodemanager plc=plctest1_vplc02 force=False * 12:13:48 -- ********** 1 RUNNING step empty_slices on plc plctest1_vplc02 retrieving slice inri_sl1 * 12:13:49 -- Deleting 1 nodes from slice inri_sl1 retrieving slice inri_sl2 * 12:13:49 -- Deleting 1 nodes from slice inri_sl2 retrieving slice inri_sl3 * 12:13:49 -- Deleting 1 nodes from slice inri_sl3 * 12:13:49 -- ********** 1 SUCCESSFUL step empty_slices on plctest1_vplc02 TRACE: 1 12-13-48->0s=0:00:00.205731s status=OK step=empty_slices plc=plctest1_vplc02 force=False * 12:13:49 -- ********** 1 RUNNING step ssh_slice_off on plc plctest1_vplc02 * 12:13:49 -- checking for ssh slice access disabled -- slice inri_sl1 * 12:13:49 -- checking for ssh slice access disabled -- slice inri_sl2 * 12:13:49 -- checking for ssh slice access disabled -- slice inri_sl3 * 12:13:49 -- Completer [3 tasks]: max timeout is 20.0 minutes, silent for 19.0 minutes (period is 15 s) . hostname vnode02.pl.sophia.inria.fr id uid=503(inri_sl1) gid=503(slices) groups=503(slices) uname -a Linux vnode02.pl.sophia.inria.fr 2.6.32-36.onelab.x86_64 #1 SMP Mon Jan 18 10:49:25 CET 2016 x86_64 x86_64 x86_64 GNU/Linux . hostname vnode02.pl.sophia.inria.fr id uid=504(inri_sl2) gid=503(slices) groups=503(slices) uname -a Linux vnode02.pl.sophia.inria.fr 2.6.32-36.onelab.x86_64 #1 SMP Mon Jan 18 10:49:25 CET 2016 x86_64 x86_64 x86_64 GNU/Linux . hostname vnode02.pl.sophia.inria.fr id uid=505(inri_sl3) gid=503(slices) groups=503(slices) uname -a Linux vnode02.pl.sophia.inria.fr 2.6.32-36.onelab.x86_64 #1 SMP Mon Jan 18 10:49:25 CET 2016 x86_64 x86_64 x86_64 GNU/Linux 15s.. . hostname vnode02.pl.sophia.inria.fr id uid=503(inri_sl1) gid=503(slices) groups=503(slices) uname -a Linux vnode02.pl.sophia.inria.fr 2.6.32-36.onelab.x86_64 #1 SMP Mon Jan 18 10:49:25 CET 2016 x86_64 x86_64 x86_64 GNU/Linux . hostname vnode02.pl.sophia.inria.fr id uid=504(inri_sl2) gid=503(slices) groups=503(slices) uname -a Linux vnode02.pl.sophia.inria.fr 2.6.32-36.onelab.x86_64 #1 SMP Mon Jan 18 10:49:25 CET 2016 x86_64 x86_64 x86_64 GNU/Linux . hostname vnode02.pl.sophia.inria.fr id uid=505(inri_sl3) gid=503(slices) groups=503(slices) uname -a Linux vnode02.pl.sophia.inria.fr 2.6.32-36.onelab.x86_64 #1 SMP Mon Jan 18 10:49:25 CET 2016 x86_64 x86_64 x86_64 GNU/Linux 15s.. . . hostname vnode02.pl.sophia.inria.fr id uid=504(inri_sl2) gid=503(slices) groups=503(slices) uname -a Linux vnode02.pl.sophia.inria.fr 2.6.32-36.onelab.x86_64 #1 SMP Mon Jan 18 10:49:25 CET 2016 x86_64 x86_64 x86_64 GNU/Linux . hostname vnode02.pl.sophia.inria.fr id uid=505(inri_sl3) gid=503(slices) groups=503(slices) uname -a Linux vnode02.pl.sophia.inria.fr 2.6.32-36.onelab.x86_64 #1 SMP Mon Jan 18 10:49:25 CET 2016 x86_64 x86_64 x86_64 GNU/Linux 15s.. . . total completer (ssh_slice_off) 47s * 12:14:36 -- ********** 1 SUCCESSFUL step ssh_slice_off on plctest1_vplc02 TRACE: 1 12-13-49->47s=0:00:47.279587s status=OK step=ssh_slice_off plc=plctest1_vplc02 force=False * 12:14:36 -- ********** 1 RUNNING step slice_fs_deleted_ignore on plc plctest1_vplc02 * 12:14:36 -- Completer [3 tasks]: max timeout is 60.0 seconds, silent for 60.0 seconds (period is 15 s) . . . total completer (slice_fs_deleted) 0s Actual (but ignored) result for slice_fs_deleted is True * 12:14:36 -- ********** 1 IGNORED (OK) step slice_fs_deleted_ignore on plctest1_vplc02 TRACE: 1 12-14-36->0s=0:00:00.351285s status=OK[I] step=slice_fs_deleted_ignore plc=plctest1_vplc02 force=False * 12:14:36 -- ********** 1 RUNNING step fill_slices on plc plctest1_vplc02 * 12:14:36 -- Adding ['vnode02.pl.sophia.inria.fr'] in inri_sl1 * 12:14:36 -- Adding ['vnode02.pl.sophia.inria.fr'] in inri_sl2 * 12:14:36 -- Adding ['vnode02.pl.sophia.inria.fr'] in inri_sl3 * 12:14:36 -- ********** 1 SUCCESSFUL step fill_slices on plctest1_vplc02 TRACE: 1 12-14-36->0s=0:00:00.122850s status=OK step=fill_slices plc=plctest1_vplc02 force=False * 12:14:36 -- ********** 1 RUNNING step ssh_slice_again on plc plctest1_vplc02 * 12:14:36 -- checking for ssh slice access enabled -- slice inri_sl1 * 12:14:36 -- checking for ssh slice access enabled -- slice inri_sl2 * 12:14:36 -- checking for ssh slice access enabled -- slice inri_sl3 * 12:14:36 -- Completer [3 tasks]: max timeout is 20.0 minutes, silent for 10.0 minutes (period is 15 s) . . . 15s.. . . . 15s.. . hostname vnode02.pl.sophia.inria.fr id uid=510(inri_sl1) gid=503(slices) groups=503(slices) uname -a Linux vnode02.pl.sophia.inria.fr 2.6.32-36.onelab.x86_64 #1 SMP Mon Jan 18 10:49:25 CET 2016 x86_64 x86_64 x86_64 GNU/Linux . hostname vnode02.pl.sophia.inria.fr id uid=511(inri_sl2) gid=503(slices) groups=503(slices) uname -a Linux vnode02.pl.sophia.inria.fr 2.6.32-36.onelab.x86_64 #1 SMP Mon Jan 18 10:49:25 CET 2016 x86_64 x86_64 x86_64 GNU/Linux . hostname vnode02.pl.sophia.inria.fr id uid=512(inri_sl3) gid=503(slices) groups=503(slices) uname -a Linux vnode02.pl.sophia.inria.fr 2.6.32-36.onelab.x86_64 #1 SMP Mon Jan 18 10:49:25 CET 2016 x86_64 x86_64 x86_64 GNU/Linux total completer (ssh_slice) 31s * 12:15:08 -- ********** 1 SUCCESSFUL step ssh_slice_again on plctest1_vplc02 TRACE: 1 12-14-36->31s=0:00:31.836722s status=OK step=ssh_slice_again plc=plctest1_vplc02 force=False * 12:15:08 -- ********** 1 RUNNING step gather_logs on plc plctest1_vplc02 -------------------- TestPlc.gather_logs : PLC's /var/log -> 12:15:08 -- + mkdir -p logs/myplc.var-log.plctest1_vplc02.2016.01.18--f14-n3-1-vplc02 -> 12:15:08 -- + ssh -n -o BatchMode=yes -o StrictHostKeyChecking=no -o CheckHostIP=no -o ConnectTimeout=5 -o UserKnownHostsFile=/dev/null buzzcocks ssh -o BatchMode=yes -o StrictHostKeyChecking=no -o CheckHostIP=no -o ConnectTimeout=5 -o UserKnownHostsFile=/dev/null vplc02 tar -C /var/log/ -cf - . + tar -C logs/myplc.var-log.plctest1_vplc02.2016.01.18--f14-n3-1-vplc02 -xf - Warning: Permanently added 'buzzcocks' (ECDSA) to the list of known hosts. Warning: Permanently added 'vplc02' (RSA) to the list of known hosts. -> 12:15:09 -- + chmod a+r,a+x logs/myplc.var-log.plctest1_vplc02.2016.01.18--f14-n3-1-vplc02/httpd -------------------- TestPlc.gather_logs : PLC's /var/lib/psql/data/pg_log/ -> 12:15:09 -- + mkdir -p logs/myplc.pgsql-log.plctest1_vplc02.2016.01.18--f14-n3-1-vplc02 -> 12:15:09 -- + ssh -n -o BatchMode=yes -o StrictHostKeyChecking=no -o CheckHostIP=no -o ConnectTimeout=5 -o UserKnownHostsFile=/dev/null buzzcocks ssh -o BatchMode=yes -o StrictHostKeyChecking=no -o CheckHostIP=no -o ConnectTimeout=5 -o UserKnownHostsFile=/dev/null vplc02 tar -C /var/lib/pgsql/data/pg_log/ -cf - . + tar -C logs/myplc.pgsql-log.plctest1_vplc02.2016.01.18--f14-n3-1-vplc02 -xf - Warning: Permanently added 'buzzcocks' (ECDSA) to the list of known hosts. Warning: Permanently added 'vplc02' (RSA) to the list of known hosts. -------------------- TestPlc.gather_logs : PLC's /root/sfi/ -> 12:15:09 -- + mkdir -p logs/sfi.plctest1_vplc02.2016.01.18--f14-n3-1-vplc02 -> 12:15:09 -- + ssh -n -o BatchMode=yes -o StrictHostKeyChecking=no -o CheckHostIP=no -o ConnectTimeout=5 -o UserKnownHostsFile=/dev/null buzzcocks ssh -o BatchMode=yes -o StrictHostKeyChecking=no -o CheckHostIP=no -o ConnectTimeout=5 -o UserKnownHostsFile=/dev/null vplc02 tar -C /root/sfi/ -cf - . + tar -C logs/sfi.plctest1_vplc02.2016.01.18--f14-n3-1-vplc02 -xf - Warning: Permanently added 'buzzcocks' (ECDSA) to the list of known hosts. Warning: Permanently added 'vplc02' (RSA) to the list of known hosts. -------------------- TestPlc.gather_logs : nodes's QEMU logs -> 12:15:09 -- + scp -o BatchMode=yes -o StrictHostKeyChecking=no -o CheckHostIP=no -o ConnectTimeout=5 boxtops:/vservers/2016.01.18--f14-n3/qemu-vnode02.pl.sophia.inria.fr/log.txt logs/node.qemu.vnode02.pl.sophia.inria.fr.txt -------------------- TestPlc.gather_logs : nodes's /var/log -> 12:15:10 -- + mkdir -p logs/node.var-log.vnode02.pl.sophia.inria.fr -> 12:15:10 -- + ssh -n -o BatchMode=yes -o StrictHostKeyChecking=no -o CheckHostIP=no -o ConnectTimeout=5 -o UserKnownHostsFile=/dev/null -i keys/key_admin.rsa vnode02.pl.sophia.inria.fr tar -C /var/log -cf - . + tar -C logs/node.var-log.vnode02.pl.sophia.inria.fr -xf - Warning: Permanently added 'vnode02.pl.sophia.inria.fr' (RSA) to the list of known hosts. -------------------- TestPlc.gather_logs : sample sliver's /var/log -> 12:15:10 -- + mkdir -p logs/sliver.var-log.inri_sl1@vnode02.pl.sophia.inria.fr -> 12:15:10 -- + ssh -n -o BatchMode=yes -o StrictHostKeyChecking=no -o CheckHostIP=no -o ConnectTimeout=5 -o UserKnownHostsFile=/dev/null -i keys/key_admin.rsa vnode02.pl.sophia.inria.fr tar -C /vservers/inri_sl1/var/log -cf - . + tar -C logs/sliver.var-log.inri_sl1@vnode02.pl.sophia.inria.fr -xf - Warning: Permanently added 'vnode02.pl.sophia.inria.fr' (RSA) to the list of known hosts. -> 12:15:10 -- + mkdir -p logs/sliver.var-log.inri_sl2@vnode02.pl.sophia.inria.fr -> 12:15:10 -- + ssh -n -o BatchMode=yes -o StrictHostKeyChecking=no -o CheckHostIP=no -o ConnectTimeout=5 -o UserKnownHostsFile=/dev/null -i keys/key_admin.rsa vnode02.pl.sophia.inria.fr tar -C /vservers/inri_sl2/var/log -cf - . + tar -C logs/sliver.var-log.inri_sl2@vnode02.pl.sophia.inria.fr -xf - Warning: Permanently added 'vnode02.pl.sophia.inria.fr' (RSA) to the list of known hosts. -> 12:15:10 -- + mkdir -p logs/sliver.var-log.inri_sl3@vnode02.pl.sophia.inria.fr -> 12:15:10 -- + ssh -n -o BatchMode=yes -o StrictHostKeyChecking=no -o CheckHostIP=no -o ConnectTimeout=5 -o UserKnownHostsFile=/dev/null -i keys/key_admin.rsa vnode02.pl.sophia.inria.fr tar -C /vservers/inri_sl3/var/log -cf - . + tar -C logs/sliver.var-log.inri_sl3@vnode02.pl.sophia.inria.fr -xf - Warning: Permanently added 'vnode02.pl.sophia.inria.fr' (RSA) to the list of known hosts. * 12:15:11 -- ********** 1 SUCCESSFUL step gather_logs on plctest1_vplc02 TRACE: 1 12-15-08->2s=0:00:02.267670s status=OK step=gather_logs plc=plctest1_vplc02 force=True TestMain exit code 0