Using physical interface eno1 + case "$1" in + shift + start + echo '========== qemu-bridge-init: entering start - beg' ========== qemu-bridge-init: entering start - beg + hostname boxtops.pl.sophia.inria.fr + uname -a Linux boxtops.pl.sophia.inria.fr 4.2.6-301.fc23.x86_64 #1 SMP Fri Nov 20 22:22:41 UTC 2015 x86_64 x86_64 x86_64 GNU/Linux + ip address show 1: lo: mtu 65536 qdisc noqueue state UNKNOWN group default link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 inet 127.0.0.1/8 scope host lo valid_lft forever preferred_lft forever inet6 ::1/128 scope host valid_lft forever preferred_lft forever 2: eno1: mtu 1500 qdisc mq master br0 state UP group default qlen 1000 link/ether b0:83:fe:d4:36:92 brd ff:ff:ff:ff:ff:ff inet 138.96.112.39/21 brd 138.96.119.255 scope global dynamic eno1 valid_lft 458sec preferred_lft 458sec inet6 fe80::b283:feff:fed4:3692/64 scope link valid_lft forever preferred_lft forever 3: eno2: mtu 1500 qdisc noop state DOWN group default qlen 1000 link/ether b0:83:fe:d4:36:93 brd ff:ff:ff:ff:ff:ff 4: eno3: mtu 1500 qdisc noop state DOWN group default qlen 1000 link/ether b0:83:fe:d4:36:94 brd ff:ff:ff:ff:ff:ff 5: eno4: mtu 1500 qdisc noop state DOWN group default qlen 1000 link/ether b0:83:fe:d4:36:95 brd ff:ff:ff:ff:ff:ff 6: br0: mtu 1500 qdisc noqueue state UP group default link/ether 1e:fa:8a:e9:a3:06 brd ff:ff:ff:ff:ff:ff inet 138.96.112.39/21 brd 138.96.119.255 scope global br0 valid_lft forever preferred_lft forever inet6 fe80::b283:feff:fed4:3692/64 scope link valid_lft forever preferred_lft forever 7: tap0: mtu 1500 qdisc fq_codel master br0 state UNKNOWN group default qlen 500 link/ether 3a:cb:b3:f4:f8:e5 brd ff:ff:ff:ff:ff:ff inet6 fe80::38cb:b3ff:fef4:f8e5/64 scope link valid_lft forever preferred_lft forever 8: tap1: mtu 1500 qdisc fq_codel master br0 state UNKNOWN group default qlen 500 link/ether c6:ef:80:97:40:53 brd ff:ff:ff:ff:ff:ff inet6 fe80::c4ef:80ff:fe97:4053/64 scope link valid_lft forever preferred_lft forever 9: tap2: mtu 1500 qdisc fq_codel master br0 state UNKNOWN group default qlen 500 link/ether 1e:fa:8a:e9:a3:06 brd ff:ff:ff:ff:ff:ff inet6 fe80::1cfa:8aff:fee9:a306/64 scope link valid_lft forever preferred_lft forever 10: tap3: mtu 1500 qdisc fq_codel master br0 state UNKNOWN group default qlen 500 link/ether 26:78:52:e0:8e:f3 brd ff:ff:ff:ff:ff:ff inet6 fe80::2478:52ff:fee0:8ef3/64 scope link valid_lft forever preferred_lft forever + ip route show default via 138.96.112.250 dev br0 138.96.112.0/21 dev br0 proto kernel scope link src 138.96.112.39 138.96.112.0/21 dev eno1 proto kernel scope link src 138.96.112.39 + echo '========== qemu-bridge-init: entering start - end' ========== qemu-bridge-init: entering start - end + sysctl net.bridge.bridge-nf-call-iptables=0 sysctl: cannot stat /proc/sys/net/bridge/bridge-nf-call-iptables: No such file or directory + sysctl net.bridge.bridge-nf-call-ip6tables=0 sysctl: cannot stat /proc/sys/net/bridge/bridge-nf-call-ip6tables: No such file or directory + sysctl net.bridge.bridge-nf-call-arptables=0 sysctl: cannot stat /proc/sys/net/bridge/bridge-nf-call-arptables: No such file or directory + '[' -n '' ']' + type -p brctl + ip address show br0 + echo 'Bridge interface br0 already set up - qemu-bridge-init start exiting' Bridge interface br0 already set up - qemu-bridge-init start exiting + exit 0 Running qemu-start-node in /vservers/onelab--5.3.12-f14-64/qemu-vnode05.pl.sophia.inria.fr Starting at Tue Jan 19 09:51:46 CET 2016 Creating hard disk image (100G) as hdd-qcow2-100G.img .. Done Trying to load the kqemu module WARNING : Could not modprobe kqemu Checking for a loaded kqemu module Checking for /dev/kqemu ls: cannot access /dev/kqemu: No such file or directory Cleaning up pid file Running qemu-kvm -m 2048 -hda hdd-qcow2-100G.img -nographic -pidfile qemu.pid -boot d -cdrom vnode05.pl.sophia.inria.fr.iso -net nic,macaddr=02:34:56:00:00:05 -net tap,script=qemu-ifup + INTERFACE_BRIDGE=br0 ++ discover_interface +++ gather_interfaces +++ python ++ for ifname in '$(gather_interfaces)' ++ ip link show eno3 ++ grep -qi 'state UP' ++ for ifname in '$(gather_interfaces)' ++ grep -qi 'state UP' ++ ip link show eno4 ++ for ifname in '$(gather_interfaces)' ++ ip link show eno1 ++ grep -qi 'state UP' ++ echo eno1 ++ return + INTERFACE_LAN=eno1 + echo Using physical interface eno1 Using physical interface eno1 + main add tap4 + case "$1" in + shift + add tap4 + [[ -z tap4 ]] + INTERFACE_LAN=tap4 + shift + echo '========== qemu-bridge-init: entering add - beg' ========== qemu-bridge-init: entering add - beg + ip address show 1: lo: mtu 65536 qdisc noqueue state UNKNOWN group default link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 inet 127.0.0.1/8 scope host lo valid_lft forever preferred_lft forever inet6 ::1/128 scope host valid_lft forever preferred_lft forever 2: eno1: mtu 1500 qdisc mq master br0 state UP group default qlen 1000 link/ether b0:83:fe:d4:36:92 brd ff:ff:ff:ff:ff:ff inet 138.96.112.39/21 brd 138.96.119.255 scope global dynamic eno1 valid_lft 457sec preferred_lft 457sec inet6 fe80::b283:feff:fed4:3692/64 scope link valid_lft forever preferred_lft forever 3: eno2: mtu 1500 qdisc noop state DOWN group default qlen 1000 link/ether b0:83:fe:d4:36:93 brd ff:ff:ff:ff:ff:ff 4: eno3: mtu 1500 qdisc noop state DOWN group default qlen 1000 link/ether b0:83:fe:d4:36:94 brd ff:ff:ff:ff:ff:ff 5: eno4: mtu 1500 qdisc noop state DOWN group default qlen 1000 link/ether b0:83:fe:d4:36:95 brd ff:ff:ff:ff:ff:ff 6: br0: mtu 1500 qdisc noqueue state UP group default link/ether 1e:fa:8a:e9:a3:06 brd ff:ff:ff:ff:ff:ff inet 138.96.112.39/21 brd 138.96.119.255 scope global br0 valid_lft forever preferred_lft forever inet6 fe80::b283:feff:fed4:3692/64 scope link valid_lft forever preferred_lft forever 7: tap0: mtu 1500 qdisc fq_codel master br0 state UNKNOWN group default qlen 500 link/ether 3a:cb:b3:f4:f8:e5 brd ff:ff:ff:ff:ff:ff inet6 fe80::38cb:b3ff:fef4:f8e5/64 scope link valid_lft forever preferred_lft forever 8: tap1: mtu 1500 qdisc fq_codel master br0 state UNKNOWN group default qlen 500 link/ether c6:ef:80:97:40:53 brd ff:ff:ff:ff:ff:ff inet6 fe80::c4ef:80ff:fe97:4053/64 scope link valid_lft forever preferred_lft forever 9: tap2: mtu 1500 qdisc fq_codel master br0 state UNKNOWN group default qlen 500 link/ether 1e:fa:8a:e9:a3:06 brd ff:ff:ff:ff:ff:ff inet6 fe80::1cfa:8aff:fee9:a306/64 scope link valid_lft forever preferred_lft forever 10: tap3: mtu 1500 qdisc fq_codel master br0 state UNKNOWN group default qlen 500 link/ether 26:78:52:e0:8e:f3 brd ff:ff:ff:ff:ff:ff inet6 fe80::2478:52ff:fee0:8ef3/64 scope link valid_lft forever preferred_lft forever 11: tap4: mtu 1500 qdisc noop state DOWN group default qlen 500 link/ether ae:e6:11:33:6c:8d brd ff:ff:ff:ff:ff:ff + ip route show default via 138.96.112.250 dev br0 138.96.112.0/21 dev br0 proto kernel scope link src 138.96.112.39 138.96.112.0/21 dev eno1 proto kernel scope link src 138.96.112.39 + echo '========== qemu-bridge-init: entering add - end' ========== qemu-bridge-init: entering add - end + echo 'Activating link for tap4...' Activating link for tap4... + /sbin/ip link set tap4 up + sleep 1 + echo 'Adding tap4 to br0' Adding tap4 to br0 + brctl addif br0 tap4 + CONFIG=qemu.conf + '[' -f qemu.conf ']' + . qemu.conf ++ MACADDR=02:34:56:00:00:05 ++ NODE_ISO=vnode05.pl.sophia.inria.fr.iso ++ HOSTNAME=vnode05.pl.sophia.inria.fr ++ IP=138.96.112.105 ++ TARGET_ARCH=x86_64 + echo 'Tweaking iptables' Tweaking iptables + iptables-save + ./iptables.py iptables.pre iptables.post 138.96.112.105 + iptables-restore + echo '========== qemu-bridge-init: exiting add - beg' ========== qemu-bridge-init: exiting add - beg + ip address show 1: lo: mtu 65536 qdisc noqueue state UNKNOWN group default link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 inet 127.0.0.1/8 scope host lo valid_lft forever preferred_lft forever inet6 ::1/128 scope host valid_lft forever preferred_lft forever 2: eno1: mtu 1500 qdisc mq master br0 state UP group default qlen 1000 link/ether b0:83:fe:d4:36:92 brd ff:ff:ff:ff:ff:ff inet 138.96.112.39/21 brd 138.96.119.255 scope global dynamic eno1 valid_lft 456sec preferred_lft 456sec inet6 fe80::b283:feff:fed4:3692/64 scope link valid_lft forever preferred_lft forever 3: eno2: mtu 1500 qdisc noop state DOWN group default qlen 1000 link/ether b0:83:fe:d4:36:93 brd ff:ff:ff:ff:ff:ff 4: eno3: mtu 1500 qdisc noop state DOWN group default qlen 1000 link/ether b0:83:fe:d4:36:94 brd ff:ff:ff:ff:ff:ff 5: eno4: mtu 1500 qdisc noop state DOWN group default qlen 1000 link/ether b0:83:fe:d4:36:95 brd ff:ff:ff:ff:ff:ff 6: br0: mtu 1500 qdisc noqueue state UP group default link/ether 1e:fa:8a:e9:a3:06 brd ff:ff:ff:ff:ff:ff inet 138.96.112.39/21 brd 138.96.119.255 scope global br0 valid_lft forever preferred_lft forever inet6 fe80::b283:feff:fed4:3692/64 scope link valid_lft forever preferred_lft forever 7: tap0: mtu 1500 qdisc fq_codel master br0 state UNKNOWN group default qlen 500 link/ether 3a:cb:b3:f4:f8:e5 brd ff:ff:ff:ff:ff:ff inet6 fe80::38cb:b3ff:fef4:f8e5/64 scope link valid_lft forever preferred_lft forever 8: tap1: mtu 1500 qdisc fq_codel master br0 state UNKNOWN group default qlen 500 link/ether c6:ef:80:97:40:53 brd ff:ff:ff:ff:ff:ff inet6 fe80::c4ef:80ff:fe97:4053/64 scope link valid_lft forever preferred_lft forever 9: tap2: mtu 1500 qdisc fq_codel master br0 state UNKNOWN group default qlen 500 link/ether 1e:fa:8a:e9:a3:06 brd ff:ff:ff:ff:ff:ff inet6 fe80::1cfa:8aff:fee9:a306/64 scope link valid_lft forever preferred_lft forever 10: tap3: mtu 1500 qdisc fq_codel master br0 state UNKNOWN group default qlen 500 link/ether 26:78:52:e0:8e:f3 brd ff:ff:ff:ff:ff:ff inet6 fe80::2478:52ff:fee0:8ef3/64 scope link valid_lft forever preferred_lft forever 11: tap4: mtu 1500 qdisc fq_codel master br0 state UNKNOWN group default qlen 500 link/ether ae:e6:11:33:6c:8d brd ff:ff:ff:ff:ff:ff inet6 fe80::ace6:11ff:fe33:6c8d/64 scope link tentative valid_lft forever preferred_lft forever + ip route show default via 138.96.112.250 dev br0 138.96.112.0/21 dev br0 proto kernel scope link src 138.96.112.39 138.96.112.0/21 dev eno1 proto kernel scope link src 138.96.112.39 + echo 'Installed iptables' Installed iptables + iptables-save # Generated by iptables-save v1.4.21 on Tue Jan 19 09:51:48 2016 *filter :INPUT ACCEPT [0:0] :FORWARD ACCEPT [0:0] :OUTPUT ACCEPT [0:0] -A INPUT -m state --state RELATED,ESTABLISHED -j ACCEPT -A INPUT -p icmp -j ACCEPT -A INPUT -i lo -j ACCEPT -A INPUT -s 138.96.112.105/32 -j ACCEPT -A INPUT -d 138.96.112.105/32 -j ACCEPT -A INPUT -s 138.96.112.104/32 -j ACCEPT -A INPUT -d 138.96.112.104/32 -j ACCEPT -A INPUT -s 138.96.112.103/32 -j ACCEPT -A INPUT -d 138.96.112.103/32 -j ACCEPT -A INPUT -s 138.96.112.102/32 -j ACCEPT -A INPUT -d 138.96.112.102/32 -j ACCEPT -A INPUT -s 138.96.112.101/32 -j ACCEPT -A INPUT -d 138.96.112.101/32 -j ACCEPT -A INPUT -p tcp -m state --state NEW -m tcp --dport 22 -j ACCEPT -A INPUT -j REJECT --reject-with icmp-host-prohibited -A FORWARD -j REJECT --reject-with icmp-host-prohibited COMMIT # Completed on Tue Jan 19 09:51:48 2016 + echo '========== qemu-bridge-init: exiting add - end' ========== qemu-bridge-init: exiting add - end + exit 0 ISOLINUX 4.02 2010-07-21 Copyright (C) 1994-2010 H. Peter Anvin et al Loading kernel...... Loading bootcd.img.................................................................................................. Loading overlay.img...ready. Initializing cgroup subsys cpuset Initializing cgroup subsys cpu Linux version 2.6.32-36.onelab.x86_64 (support@planet-lab.org) (gcc version 4.5.1 20100924 (Red Hat 4.5.1-4) (GCC) ) #1 SMP Tue Jan 19 09:12:00 CET 2016 Command line: ramdisk_size=300105 initrd=bootcd.img,overlay.img root=/dev/ram0 rw hcheck_reboot0 systemd.log_level=debug console=ttyS0,115200n8 biosdevname=0 selinux=0 BOOT_IMAGE=kernel KERNEL supported cpus: Intel GenuineIntel AMD AuthenticAMD Centaur CentaurHauls BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000007ffe0000 (usable) BIOS-e820: 000000007ffe0000 - 0000000080000000 (reserved) BIOS-e820: 00000000feffc000 - 00000000ff000000 (reserved) BIOS-e820: 00000000fffc0000 - 0000000100000000 (reserved) DMI 2.8 present. SMBIOS version 2.8 @ 0xF6330 last_pfn = 0x7ffe0 max_arch_pfn = 0x400000000 PAT not supported by CPU. init_memory_mapping: 0000000000000000-000000007ffe0000 RAMDISK: 7a051000 - 7ffbecf2 ACPI: RSDP 00000000000f6300 00014 (v00 BOCHS ) ACPI: RSDT 000000007ffe16ee 00034 (v01 BOCHS BXPCRSDT 00000001 BXPC 00000001) ACPI: FACP 000000007ffe0c14 00074 (v01 BOCHS BXPCFACP 00000001 BXPC 00000001) ACPI: DSDT 000000007ffe0040 00BD4 (v01 BOCHS BXPCDSDT 00000001 BXPC 00000001) ACPI: FACS 000000007ffe0000 00040 ACPI: SSDT 000000007ffe0c88 009B6 (v01 BOCHS BXPCSSDT 00000001 BXPC 00000001) ACPI: APIC 000000007ffe163e 00078 (v01 BOCHS BXPCAPIC 00000001 BXPC 00000001) ACPI: HPET 000000007ffe16b6 00038 (v01 BOCHS BXPCHPET 00000001 BXPC 00000001) No NUMA configuration found Faking a node at 0000000000000000-000000007ffe0000 Bootmem setup node 0 0000000000000000-000000007ffe0000 NODE_DATA [000000000000a000 - 000000000003dfff] bootmap [000000000003e000 - 000000000004dfff] pages 10 (7 early reservations) ==> bootmem [0000000000 - 007ffe0000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000] #2 [0001000000 - 0001f4fdc4] TEXT DATA BSS ==> [0001000000 - 0001f4fdc4] #3 [007a051000 - 007ffbecf2] RAMDISK ==> [007a051000 - 007ffbecf2] #4 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000] #5 [0001f50000 - 0001f50095] BRK ==> [0001f50000 - 0001f50095] #6 [0000008000 - 000000a000] PGTABLE ==> [0000008000 - 000000a000] found SMP MP-table at [ffff8800000f64e0] f64e0 kvm-clock: Using msrs 4b564d01 and 4b564d00 kvm-clock: cpu 0, msr 0:1bc10c1, boot clock Zone PFN ranges: DMA 0x00000001 -> 0x00001000 DMA32 0x00001000 -> 0x00100000 Normal 0x00100000 -> 0x00100000 Movable zone start PFN for each node early_node_map[2] active PFN ranges 0: 0x00000001 -> 0x0000009f 0: 0x00000100 -> 0x0007ffe0 ACPI: PM-Timer IO Port: 0x608 ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1]) ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 0, version 17, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level) ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level) Using ACPI (MADT) for SMP configuration information ACPI: HPET id: 0x8086a201 base: 0xfed00000 SMP: Allowing 1 CPUs, 0 hotplug CPUs PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000 PM: Registered nosave memory: 00000000000f0000 - 0000000000100000 Allocating PCI resources starting at 80000000 (gap: 80000000:7effc000) Booting paravirtualized kernel on KVM NR_CPUS:4096 nr_cpumask_bits:1 nr_cpu_ids:1 nr_node_ids:1 PERCPU: Embedded 30 pages/cpu @ffff880002000000 s93016 r8192 d21672 u2097152 pcpu-alloc: s93016 r8192 d21672 u2097152 alloc=1*2097152 pcpu-alloc: [0] 0 kvm-clock: cpu 0, msr 0:20160c1, primary cpu clock Built 1 zonelists in Node order, mobility grouping on. Total pages: 516889 Policy zone: DMA32 Kernel command line: ramdisk_size=300105 initrd=bootcd.img,overlay.img root=/dev/ram0 rw hcheck_reboot0 systemd.log_level=debug console=ttyS0,115200n8 biosdevname=0 selinux=0 BOOT_IMAGE=kernel PID hash table entries: 4096 (order: 3, 32768 bytes) Checking aperture... No AGP bridge found AMD-Vi disabled by default: pass amd_iommu=on to enable Memory: 1953932k/2097024k available (5343k kernel code, 392k absent, 142700k reserved, 6597k data, 1232k init) Hierarchical RCU implementation. NR_IRQS:33024 nr_irqs:256 Console: colour VGA+ 80x25 console [ttyS0] enabled allocated 20971520 bytes of page_cgroup please try 'cgroup_disable=memory' option if you don't want memory cgroups HPET: 3 timers in total, 0 timers will be used for per-cpu timer Detected 2599.996 MHz processor. Calibrating delay loop (skipped) preset value.. 5199.99 BogoMIPS (lpj=2599996) pid_max: default: 32768 minimum: 301 Security Framework initialized SELinux: Disabled at boot. Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes) Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes) Mount-cache hash table entries: 256 Initializing cgroup subsys ns Initializing cgroup subsys cpuacct Initializing cgroup subsys memory Initializing cgroup subsys devices Initializing cgroup subsys freezer Initializing cgroup subsys net_cls Initializing cgroup subsys blkio mce: CPU supports 10 MCE banks alternatives: switching to unfair spinlock SMP alternatives: switching to UP code Freeing SMP alternatives: 38k freed ACPI: Core revision 20090903 ftrace: converting mcount calls to 0f 1f 44 00 00 ftrace: allocating 21994 entries in 87 pages Enabling x2apic Enabled x2apic Setting APIC routing to physical x2apic ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 CPU0: Intel QEMU Virtual CPU version 2.4.1 stepping 03 Performance Events: Broken PMU hardware detected, using software events only. NMI watchdog disabled (cpu0): hardware events not enabled Brought up 1 CPUs Total of 1 processors activated (5199.99 BogoMIPS). devtmpfs: initialized regulator: core version 0.5 NET: Registered protocol family 16 ACPI: bus type pci registered PCI: Using configuration type 1 for base access bio: create slab at 0 ACPI: Interpreter enabled ACPI: (supports S0 S3 S4 S5) ACPI: Using IOAPIC for interrupt routing ACPI: No dock devices found. ACPI: PCI Root Bridge [PCI0] (0000:00) pci 0000:00:01.3: quirk: region 0600-063f claimed by PIIX4 ACPI pci 0000:00:01.3: quirk: region 0700-070f claimed by PIIX4 SMB ACPI: PCI Interrupt Link [LNKA] (IRQs 5 *10 11) ACPI: PCI Interrupt Link [LNKB] (IRQs 5 *10 11) ACPI: PCI Interrupt Link [LNKC] (IRQs 5 10 *11) ACPI: PCI Interrupt Link [LNKD] (IRQs 5 10 *11) ACPI: PCI Interrupt Link [LNKS] (IRQs *9) HEST: Table is not found! vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none vgaarb: loaded SCSI subsystem initialized usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb PCI: Using ACPI for IRQ routing NetLabel: Initializing NetLabel: domain hash size = 128 NetLabel: protocols = UNLABELED CIPSOv4 NetLabel: unlabeled traffic allowed by default hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 hpet0: 3 comparators, 64-bit 100.000000 MHz counter Switching to clocksource kvm-clock pnp: PnP ACPI init ACPI: bus type pnp registered pnp: PnP ACPI: found 11 devices ACPI: ACPI bus type pnp unregistered NET: Registered protocol family 2 IP route cache hash table entries: 65536 (order: 7, 524288 bytes) TCP established hash table entries: 262144 (order: 10, 4194304 bytes) TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) TCP: Hash tables configured (established 262144 bind 65536) TCP reno registered NET: Registered protocol family 1 pci 0000:00:00.0: Limiting direct PCI/PCI transfers pci 0000:00:01.0: PIIX3: Enabling Passive Release pci 0000:00:01.0: Activating ISA DMA hang workarounds Trying to unpack rootfs image as initramfs... Freeing initrd memory: 97719k freed audit: initializing netlink socket (disabled) type=2000 audit(1453193517.371:1): initialized HugeTLB registered 2 MB page size, pre-allocated 0 pages VFS: Disk quotas dquot_6.5.2 Dquot-cache hash table entries: 512 (order 0, 4096 bytes) msgmni has been set to 4007 alg: No test for stdrng (krng) ksign: Installing public key data Loading keyring - Added public key D1C3198AB517476D - User ID: Red Hat, Inc. (Kernel Module GPG key) - Added public key D4A26C9CCD09BEDA - User ID: Red Hat Enterprise Linux Driver Update Program Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) pci_hotplug: PCI Hot Plug PCI Core version: 0.5 pciehp: PCI Express Hot Plug Controller Driver version: 0.4 acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 acpiphp: Slot [3] registered acpiphp: Slot [4] registered acpiphp: Slot [5] registered acpiphp: Slot [6] registered acpiphp: Slot [7] registered acpiphp: Slot [8] registered acpiphp: Slot [9] registered acpiphp: Slot [10] registered acpiphp: Slot [11] registered acpiphp: Slot [12] registered acpiphp: Slot [13] registered acpiphp: Slot [14] registered acpiphp: Slot [15] registered acpiphp: Slot [16] registered acpiphp: Slot [17] registered acpiphp: Slot [18] registered acpiphp: Slot [19] registered acpiphp: Slot [20] registered acpiphp: Slot [21] registered acpiphp: Slot [22] registered acpiphp: Slot [23] registered acpiphp: Slot [24] registered acpiphp: Slot [25] registered acpiphp: Slot [26] registered acpiphp: Slot [27] registered acpiphp: Slot [28] registered acpiphp: Slot [29] registered acpiphp: Slot [30] registered acpiphp: Slot [31] registered pci-stub: invalid id string "" input: Power Button as /class/input/input0 ACPI: Power Button [PWRF] processor LNXCPU:00: registered as cooling_device0 ERST: Table is not found! Non-volatile memory driver v1.3 Linux agpgart interface v0.103 crash memory driver: version 1.1 Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled ˙serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A 00:06: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A brd: module loaded loop: module loaded input: Macintosh mouse button emulation as /class/input/input1 Fixed MDIO Bus: probed ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver uhci_hcd: USB Universal Host Controller Interface driver PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12 serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice input: AT Translated Set 2 keyboard as /class/input/input2 rtc_cmos 00:01: RTC can wake from S4 rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0 rtc0: alarms up to one day, 114 bytes nvram, hpet irqs cpuidle: using governor ladder cpuidle: using governor menu usbcore: registered new interface driver hiddev usbcore: registered new interface driver usbhid usbhid: v2.6:USB HID core driver TCP cubic registered Initializing XFRM netlink socket NET: Registered protocol family 10 lo: Disabled Privacy Extensions NET: Registered protocol family 17 registered taskstats version 1 rtc_cmos 00:01: setting system clock to 2016-01-19 08:51:58 UTC (1453193518) Initalizing network drop monitor service Freeing unused kernel memory: 1232k freed Write protecting the kernel read-only data: 10240k Freeing unused kernel memory: 784k freed Freeing unused kernel memory: 1736k freed PlanetLab BootCD - distro onelab based on f14 08:51:58 pl_sysinit: bringing system online 08:51:58 pl_sysinit: mounting file systems none on /dev/pts type devpts (rw,gid=5,mode=620) mount: proc already mounted mount: none already mounted or /sys busy 08:51:58 pl_sysinit: starting udevd Starting udev: e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k6-1-NAPI e1000: Copyright (c) 1999-2006 Intel Corporation. scsi0 : ata_piix scsi1 : ata_piix ata1: PATA max MWDMA2 cmd 0x1f0 ctl 0x3f6 bmdma 0xc040 irq 14 ata2: PATA max MWDMA2 cmd 0x170 ctl 0x376 bmdma 0xc048 irq 15 ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11 e1000 0000:00:03.0: PCI INT A -> Link[LNKC] -> GSI 11 (level, high) -> IRQ 11 ata2.00: ATAPI: QEMU DVD-ROM, 2.4.1, max UDMA/100 ata1.00: ATA-7: QEMU HARDDISK, 2.4.1, max UDMA/100 ata1.00: 209715200 sectors, multi 16: LBA48 ata2.00: configured for MWDMA2 ata1.00: configured for MWDMA2 scsi 0:0:0:0: Direct-Access ATA QEMU HARDDISK 2.4. PQ: 0 ANSI: 5 scsi 1:0:0:0: CD-ROM QEMU QEMU DVD-ROM 2.4. PQ: 0 ANSI: 5 parport_pc 00:05: reported by Plug and Play ACPI parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE] e1000 0000:00:03.0: eth0: (PCI:33MHz:32-bit) 02:34:56:00:00:05 e1000 0000:00:03.0: eth0: Intel(R) PRO/1000 Network Connection piix4_smbus 0000:00:01.3: SMBus Host Controller at 0x700, revision 0 sd 0:0:0:0: [sda] 209715200 512-byte logical blocks: (107 GB/100 GiB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda: unknown partition table sd 0:0:0:0: [sda] Attached SCSI disk sr0: scsi3-mmc drive: 4x/4x cd/rw xa/form2 tray Uniform CD-ROM driver Revision: 3.20 sd 0:0:0:0: Attached scsi generic sg0 type 0 sr 1:0:0:0: Attached scsi generic sg1 type 5 ppdev: user-space parallel port driver [ OK ] 08:51:59 pl_sysinit: invoking hardware initialization script 08:51:59(UTC) pl_hwinit: loading applicable modules 08:51:59(UTC) pl_hwinit: found and loading module ata_piix (00:01.1)input: ImExPS/2 Generic Explorer Mouse as /class/input/input3 WARNING: Deprecated config file /etc/modprobe.conf, all config files belong into /etc/modprobe.d/. 08:51:59(UTC) pl_hwinit: found and loading module pata_acpi (00:01.1) WARNING: Deprecated config file /etc/modprobe.conf, all config files belong into /etc/modprobe.d/. 08:51:59(UTC) pl_hwinit: found and loading module i2c-piix4 (00:01.3) WARNING: Deprecated config file /etc/modprobe.conf, all config files belong into /etc/modprobe.d/. 08:51:59(UTC) pl_hwinit: found and loading module e1000 (00:03.0) WARNING: Deprecated config file /etc/modprobe.conf, all config files belong into /etc/modprobe.d/. 08:51:59(UTC) pl_hwinit: loading sd_mod WARNING: Deprecated config file /etc/modprobe.conf, all config files belong into /etc/modprobe.d/. 08:51:59(UTC) pl_hwinit: loading usb_storage WARNING: Deprecated config file /etc/modprobe.conf, all config files belong into /etc/modprobe.d/. Initializing USB Mass Storage driver... usbcore: registered new interface driver usb-storage USB Mass Storage support registered. 08:51:59(UTC) pl_hwinit: loading floppy device driver WARNING: Deprecated config file /etc/modprobe.conf, all config files belong into /etc/modprobe.d/. floppy0: allowed_drive_mask=0 Floppy drive(s): fd0 is 1.44M FDC 0 is a S82078B 08:51:59(UTC) pl_hwinit: waiting for usb system to initialize. 08:52:09 pl_sysinit: finding cd to mount on /usr 08:52:09 pl_sysinit: creating device mapper control node 08:52:09 pl_sysinit: unable to create device mapper control node, continuing 08:52:09 pl_sysinit: configuring kernel parameters net.ipv4.ip_forward = 0 net.ipv4.conf.default.rp_filter = 1 kernel.sysrq = 0 kernel.core_uses_pid = 1 net.ipv4.tcp_moderate_rcvbuf = 0 net.ipv4.tcp_window_scaling = 0 Starting system logger: [ OK ] 08:52:09 pl_sysinit: bringing network online + OLD_NODE_CONF_NAME=planet.cnf + NEW_NODE_CONF_NAME=plnode.txt + CD_NET_CONF_BOOT=/usr/boot/plnode.txt + CD_NET_CONF_ROOT=/usr/plnode.txt + FALLBACK_NET_CONF=/usr/boot/default-node.txt + TMP_OLD_FLOPPY_CONF_FILE=/tmp/oldfloppy_planet.cnf + USED_NET_CONF=/tmp/planet.cnf + DEFAULT_NET_DEV=eth0 + DHCLIENT_CONF_FILE=/tmp/dhclient.conf + NODE_CONF_DEVICE_FS_TYPES=msdos,ext2 + CONF_DEVICE_MOUNT_POINT=/mnt/confdevice + /bin/mkdir -p /mnt/confdevice + IFCONFIG_OUTPUT=/tmp/ifconfig + DEFAULT_NET_CONF=0 ++ date +%H:%M:%S + echo 08:52:09 ' pl_netinit: bringing loopback network device up' 08:52:09 pl_netinit: bringing loopback network device up + /sbin/ifconfig lo 127.0.0.1 up + find_node_config + /bin/rm -f /tmp/oldfloppy_planet.cnf ++ date +%H:%M:%S + echo 08:52:09 ' pl_netinit: looking for node configuration file on floppy' 08:52:09 pl_netinit: looking for node configuration file on floppy + /bin/mount -o ro -t msdos,ext2 /dev/fd0 /mnt/confdevice end_request: I/O error, dev fd0, sector 0 end_request: I/O error, dev fd0, sector 0 mount: /dev/fd0 is not a valid block device + [[ 32 -eq 0 ]] ++ date +%H:%M:%S + echo 08:52:09 ' pl_netinit: no floppy could be mounted, continuing search.' 08:52:09 pl_netinit: no floppy could be mounted, continuing search. ++ date +%H:%M:%S + echo 08:52:09 ' pl_netinit: looking for node configuration file on flash based devices' 08:52:09 pl_netinit: looking for node configuration file on flash based devices + shopt -s nullglob + for device in '/sys/block/[hsv]d*' ++ cat /sys/block/sda/removable + removable=0 + [[ 0 -ne 1 ]] + continue + shopt -u nullglob + '[' -r /tmp/oldfloppy_planet.cnf ']' ++ date +%H:%M:%S + echo 08:52:09 ' pl_netinit: looking for network configuration on cd in /usr/boot' 08:52:09 pl_netinit: looking for network configuration on cd in /usr/boot + '[' -r /usr/boot/plnode.txt ']' ++ date +%H:%M:%S + echo 08:52:09 ' pl_netinit: found cd configuration file ' 08:52:09 pl_netinit: found cd configuration file + /etc/init.d/pl_validateconf + return 1 + '[' 1 -eq 0 ']' ++ date +%H:%M:%S + echo 08:52:09 ' pl_netinit: loading network configuration' 08:52:09 pl_netinit: loading network configuration + . /tmp/planet.cnf ++ NODE_ID=1 ++ NET_DEVICE=02:34:56:00:00:05 ++ IP_METHOD=static ++ IP_ADDRESS=138.96.112.105 ++ IP_GATEWAY=138.96.112.250 ++ IP_NETMASK=255.255.248.0 ++ IP_NETADDR=138.96.112.0 ++ IP_BROADCASTADDR=138.96.119.255 ++ IP_DNS1=138.96.112.1 ++ IP_DNS2=138.96.112.2 ++ HOST_NAME=vnode05 ++ DOMAIN_NAME=pl.sophia.inria.fr + [[ 0 -eq 1 ]] + [[ -n '' ]] + ETH_DEVICE= + [[ -n 02:34:56:00:00:05 ]] ++ tr A-Z a-z + NET_DEVICE=02:34:56:00:00:05 + pushd /sys/class/net /sys/class/net / + for device in '*' ++ tr A-Z a-z ++ cat eth0/address + dev_address=02:34:56:00:00:05 + '[' eth0 == 02:34:56:00:00:05 -o 02:34:56:00:00:05 == 02:34:56:00:00:05 ']' + ETH_DEVICE=eth0 ++ date +%H:%M:%S + echo 08:52:09 ' pl_netinit: found device eth0 with mac address 02:34:56:00:00:05' 08:52:09 pl_netinit: found device eth0 with mac address 02:34:56:00:00:05 + break + popd / + [[ -z eth0 ]] + [[ -z eth0 ]] + ALLOW=60 + COUNTER=0 + true + /sbin/ifconfig eth0 ++ date +%H:%M:%S + echo 08:52:09 ' pl_netinit: device present eth0, proceeding (0s/60s)' 08:52:09 pl_netinit: device present eth0, proceeding (0s/60s) + break + /sbin/ifconfig eth0 up e1000: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX ++ date +%H:%M:%S + echo 08:52:09 ' pl_netinit: attempting to start networking' 08:52:09 pl_netinit: attempting to start networking + /sbin/service network start Bringing up loopback interface: [ OK ] Bringing up interface eth0: grep: /etc/resolv.conf: No such file or directory cat: /etc/resolv.conf: No such file or directory cp: cannot stat `/etc/resolv.conf': No such file or directory [ OK ] + /sbin/ifconfig eth0 ++ date +%H:%M:%S + echo 08:52:11 ' pl_netinit: network online' 08:52:11 pl_netinit: network online + pl_netinit_patch_resolv_conf + file=/etc/resolv.conf + needed= + '[' -f /etc/resolv.conf ']' + cmp /etc/resolv.conf /dev/null cmp: EOF on /dev/null + '[' -n '' ']' + echo pl_netinit has no need to patch /etc/resolv.conf pl_netinit has no need to patch /etc/resolv.conf + pl_netinit_forensics + echo '-------------------- BEG post pl_netinit forensics' -------------------- BEG post pl_netinit forensics + file=/root/.ssh/authorized_keys + echo /root/.ssh/authorized_keys /root/.ssh/authorized_keys + '[' -f /root/.ssh/authorized_keys ']' + echo '!!!!!!!!!! missing /root/.ssh/authorized_keys' !!!!!!!!!! missing /root/.ssh/authorized_keys + file=/etc/ssh/sshd_config + '[' -f /etc/ssh/sshd_config ']' + echo '---------- egrep Pass|Auth|PAM|Root' /etc/ssh/sshd_config ---------- egrep Pass|Auth|PAM|Root /etc/ssh/sshd_config + egrep 'Pass|Auth|PAM|Root' + grep -v '^#' /etc/ssh/sshd_config PasswordAuthentication yes ChallengeResponseAuthentication no GSSAPIAuthentication yes UsePAM yes + file=/etc/resolv.conf + '[' -f /etc/resolv.conf ']' + echo '---------- /etc/resolv.conf' ---------- /etc/resolv.conf + cat /etc/resolv.conf nameserver 138.96.112.1 nameserver 138.96.112.2 search pl.sophia.inria.fr + echo '-------------------- END post pl_netinit forensics' -------------------- END post pl_netinit forensics 08:52:11 ======================================== BEG SANITY CHECKS 08:52:11 ========== running cat /etc/resolv.conf nameserver 138.96.112.1 nameserver 138.96.112.2 search pl.sophia.inria.fr 08:52:11 ========== cat /etc/resolv.conf returned with retcod=0 08:52:11 ========== running cat /etc/sysconfig/network-scripts/ifcfg-eth0 # Autogenerated by pyplnet... do not edit! DEVICE=eth0 USERCTL="no" DNS2="138.96.112.2" DNS1="138.96.112.1" IPADDR="138.96.112.105" PRIMARY="yes" NETMASK="255.255.248.0" BOOTPROTO="static" HWADDR="02:34:56:00:00:05" ONBOOT="yes" 08:52:11 ========== cat /etc/sysconfig/network-scripts/ifcfg-eth0 returned with retcod=0 08:52:11 ==================== Loaded modules 08:52:11 ========== running lsmod Module Size Used by ext2 71464 0 mbcache 7982 1 ext2 msdos 7904 0 fat 55171 1 msdos floppy 60968 0 usb_storage 49373 0 sg 30372 0 sd_mod 38851 0 crc_t10dif 1507 1 sd_mod sr_mod 16193 0 cdrom 39471 1 sr_mod ata_generic 3643 0 ppdev 8791 0 parport_pc 22983 0 pata_acpi 3667 0 i2c_piix4 12510 0 parport 37171 2 ppdev,parport_pc e1000 167412 0 i2c_core 31327 1 i2c_piix4 ata_piix 22795 0 08:52:11 ========== lsmod returned with retcod=0 08:52:11 ==================== Configured interfaces 08:52:11 ========== running ifconfig eth0 Link encap:Ethernet HWaddr 02:34:56:00:00:05 inet addr:138.96.112.105 Bcast:138.96.119.255 Mask:255.255.248.0 inet6 addr: fe80::34:56ff:fe00:5/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:130 errors:0 dropped:0 overruns:0 frame:0 TX packets:9 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:9791 (9.5 KiB) TX bytes:583 (583.0 b) lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:0 (0.0 b) TX bytes:0 (0.0 b) 08:52:11 ========== ifconfig returned with retcod=0 08:52:11 ==================== cat /proc/net/dev 08:52:11 ========== running cat /proc/net/dev Inter-| Receive | Transmit face |bytes packets errs drop fifo frame compressed multicast|bytes packets errs drop fifo colls carrier compressed lo: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 eth0: 9791 130 0 0 0 0 0 0 583 9 0 0 0 0 0 0 08:52:11 ========== cat /proc/net/dev returned with retcod=0 08:52:11 ==================== Routing table 08:52:11 ========== running netstat -rn Kernel IP routing table Destination Gateway Genmask Flags MSS Window irtt Iface 138.96.112.0 0.0.0.0 255.255.248.0 U 0 0 0 eth0 169.254.0.0 0.0.0.0 255.255.0.0 U 0 0 0 eth0 0.0.0.0 138.96.112.250 0.0.0.0 UG 0 0 0 eth0 08:52:11 ========== netstat -rn returned with retcod=0 08:52:11 ==================== Pinging boot server ( vplc05.pl.sophia.inria.fr ) from file /usr/boot/boot_server 08:52:11 ========== running ping -c 4 -w 4 vplc05.pl.sophia.inria.fr PING vplc05.pl.sophia.inria.fr (138.96.112.75) 56(84) bytes of data. 64 bytes from vplc05.pl.sophia.inria.fr (138.96.112.75): icmp_req=1 ttl=64 time=1.01 ms 64 bytes from vplc05.pl.sophia.inria.fr (138.96.112.75): icmp_req=2 ttl=64 time=0.266 ms 64 bytes from vplc05.pl.sophia.inria.fr (138.96.112.75): icmp_req=3 ttl=64 time=0.273 ms 64 bytes from vplc05.pl.sophia.inria.fr (138.96.112.75): icmp_req=4 ttl=64 time=0.303 ms --- vplc05.pl.sophia.inria.fr ping statistics --- 4 packets transmitted, 4 received, 0% packet loss, time 3004ms rtt min/avg/max/mdev = 0.266/0.464/1.016/0.319 ms 08:52:14 ========== ping -c 4 -w 4 vplc05.pl.sophia.inria.fr returned with retcod=0 08:52:14 ==================== Pinging google public DNS 08:52:14 ========== running ping -c 1 -w 5 8.8.8.8 PING 8.8.8.8 (8.8.8.8) 56(84) bytes of data. 64 bytes from 8.8.8.8: icmp_req=1 ttl=57 time=4.59 ms --- 8.8.8.8 ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 0ms rtt min/avg/max/mdev = 4.590/4.590/4.590/0.000 ms 08:52:14 ========== ping -c 1 -w 5 8.8.8.8 returned with retcod=0 08:52:14 ==================== Resolving hostname at 138.96.112.1 08:52:14 ========== running host -W 4 pool.ntp.org 138.96.112.1 Using domain server: Name: 138.96.112.1 Address: 138.96.112.1#53 Aliases: pool.ntp.org has address 178.32.54.53 pool.ntp.org has address 194.57.169.1 pool.ntp.org has address 195.154.113.163 pool.ntp.org has address 62.210.28.176 08:52:14 ========== host -W 4 pool.ntp.org 138.96.112.1 returned with retcod=0 08:52:14 ==================== Resolving hostname at 138.96.112.2 08:52:14 ========== running host -W 4 pool.ntp.org 138.96.112.2 Using domain server: Name: 138.96.112.2 Address: 138.96.112.2#53 Aliases: pool.ntp.org has address 195.154.216.35 pool.ntp.org has address 212.83.180.17 pool.ntp.org has address 91.121.61.132 pool.ntp.org has address 91.121.181.58 08:52:14 ========== host -W 4 pool.ntp.org 138.96.112.2 returned with retcod=0 08:52:14 ======================================== END SANITY CHECKS 08:52:14 pl_sysinit: attempting to sync clock 19 Jan 08:52:23 ntpdate[567]: no server suitable for synchronization found 08:52:24 pl_boot: generating new nonce 08:52:24 pl_boot: fetching script from boot server vplc05.pl.sophia.inria.fr 08:52:24 pl_boot: verifying downloaded script 08:52:24 pl_boot: decrypted and verified script succesfully 08:52:24 pl_boot: handing control to download script Current BREAKPOINT_MODE is Off 08:52:24(UTC) BootManager started at: Tue, 19 Jan 2016 08:52:24 +0000 08:52:24(UTC) Running version 5.3 of BootManager. 08:52:24(UTC) Step: Initializing the BootManager. 08:52:24(UTC) Opening connection to API server Default xmlrpclib strategy failed Traceback (most recent call last): File "/tmp/source/steps/InitializeBootManager.py", line 69, in Run ssl_context = ssl.SSLContext(ssl.PROTOCOL_TLSv1) AttributeError: 'module' object has no attribute 'SSLContext' 08:52:24(UTC) Running on boot cd version: (5, 3) 08:52:24(UTC) Loading support for LVM 08:52:24(UTC) sysexec >>> modprobe dm_mod sysexec >>> modprobe dm_mod device-mapper: uevent: version 1.0.3 device-mapper: ioctl: 4.20.6-ioctl (2011-02-02) initialised: dm-devel@redhat.com 08:52:24(UTC) ==========stderr WARNING: Deprecated config file /etc/modprobe.conf, all config files belong into /etc/modprobe.d/. 08:52:24(UTC) Step: Reading node configuration file. 08:52:24(UTC) Checking standard floppy disk for plnode.txt file. 08:52:24(UTC) Mounting /dev/fd0 on /tmp/conffilemount 08:52:24(UTC) sysexec >>> mount -o ro -t ext2,msdos /dev/fd0 /tmp/conffilemount sysexec >>> mount -o ro -t ext2,msdos /dev/fd0 /tmp/conffilemount end_request: I/O error, dev fd0, sector 0 end_request: I/O error, dev fd0, sector 0 08:52:25(UTC) ==========stderr mount: /dev/fd0 is not a valid block device 08:52:25(UTC) sysexec >>> umount /tmp/conffilemount sysexec >>> umount /tmp/conffilemount 08:52:25(UTC) ==========stderr umount: /tmp/conffilemount: not mounted 08:52:25(UTC) Checking flash devices for plnode.txt file. 08:52:25(UTC) Skipping non-scsi device ram0 08:52:25(UTC) Skipping non-scsi device ram1 08:52:25(UTC) Skipping non-scsi device ram2 08:52:25(UTC) Skipping non-scsi device ram3 08:52:25(UTC) Skipping non-scsi device ram4 08:52:25(UTC) Skipping non-scsi device ram5 08:52:25(UTC) Skipping non-scsi device ram6 08:52:25(UTC) Skipping non-scsi device ram7 08:52:25(UTC) Skipping non-scsi device ram8 08:52:25(UTC) Skipping non-scsi device ram9 08:52:25(UTC) Skipping non-scsi device ram10 08:52:25(UTC) Skipping non-scsi device ram11 08:52:25(UTC) Skipping non-scsi device ram12 08:52:25(UTC) Skipping non-scsi device ram13 08:52:25(UTC) Skipping non-scsi device ram14 08:52:25(UTC) Skipping non-scsi device ram15 08:52:25(UTC) Skipping non-scsi device loop0 08:52:25(UTC) Skipping non-scsi device loop1 08:52:25(UTC) Skipping non-scsi device loop2 08:52:25(UTC) Skipping non-scsi device loop3 08:52:25(UTC) Skipping non-scsi device loop4 08:52:25(UTC) Skipping non-scsi device loop5 08:52:25(UTC) Skipping non-scsi device loop6 08:52:25(UTC) Skipping non-scsi device loop7 08:52:25(UTC) Skipping non-removable device sda 08:52:25(UTC) Skipping non-scsi device sr0 08:52:25(UTC) Skipping non-scsi device fd0 08:52:25(UTC) Checking standard floppy disk for planet.cnf file (for legacy nodes). 08:52:25(UTC) Checking / (ramdisk) for plnode.txt file. 08:52:25(UTC) Checking for existence of /plnode.txt 08:52:25(UTC) Checking /usr/boot (cd) for plnode.txt file. 08:52:25(UTC) Checking for existence of /usr/boot/plnode.txt 08:52:25(UTC) Read in contents of file /usr/boot/plnode.txt 08:52:25(UTC) Successfully read and parsed node configuration file. 08:52:25(UTC) Checking that hostname vnode05.pl.sophia.inria.fr resolves 08:52:25(UTC) Hostname vnode05.pl.sophia.inria.fr correctly resolves to 138.96.112.105: 08:52:25(UTC) Using NODE_ID 1 08:52:25(UTC) ReadNodeConfiguration: [5] using plnode.txt from CD in /usr/boot 08:52:25(UTC) Step: Authenticating node with PLC. 08:52:25(UTC) Authentication successful. 08:52:25(UTC) Step: Updating node last boot times at PLC. 08:52:25(UTC) Successfully updated boot state for this node at PLC 08:52:25(UTC) Step: Starting RunlevelAgent.py 08:52:25(UTC) Step: Retrieving details of node from PLC. 08:52:25(UTC) Successfully retrieved node record. 08:52:25(UTC) Current boot state: reinstall 08:52:25(UTC) Node make/model: qemu/minhw 08:52:25(UTC) node model indicates override to hardware requirements. 08:52:25(UTC) Primary network as returned from PLC: {'last_updated': None, 'network': '138.96.112.0', 'ip': '138.96.112.105', 'dns1': '138.96.112.1', 'hostname': None, 'netmask': '255.255.248.0', 'interface_tag_ids': [], 'interface_id': 1, 'broadcast': '138.96.119.255', 'method': 'static', 'mac': '02:34:56:00:00:05', 'node_id': 1, 'gateway': '138.96.112.250', 'dns2': '138.96.112.2', 'is_primary': True, 'type': 'ipv4', 'bwlimit': None} 08:52:25(UTC) NodeFlavour as returned from PLC: {'fcdistro': 'f14', 'nodefamily': 'onelab-f14-x86_64', 'virt': 'vs', 'extensions': [], 'pldistro': 'onelab', 'plain': False, 'arch': 'x86_64'} 08:52:25(UTC) Step: Starting fallback sshd. 08:52:25(UTC) Creating SSH1 RSA host key /etc/ssh/ssh_host_key 08:52:25(UTC) sysexec >>> ssh-keygen -q -t rsa1 -f /etc/ssh/ssh_host_key -C '' -N '' sysexec >>> ssh-keygen -q -t rsa1 -f /etc/ssh/ssh_host_key -C '' -N '' 08:52:25(UTC) sysexec >>> chmod 600 /etc/ssh/ssh_host_key sysexec >>> chmod 600 /etc/ssh/ssh_host_key 08:52:25(UTC) sysexec >>> chmod 644 /etc/ssh/ssh_host_key.pub sysexec >>> chmod 644 /etc/ssh/ssh_host_key.pub 08:52:25(UTC) Creating SSH2 RSA host key /etc/ssh/ssh_host_rsa_key 08:52:25(UTC) sysexec >>> ssh-keygen -q -t rsa -f /etc/ssh/ssh_host_rsa_key -C '' -N '' sysexec >>> ssh-keygen -q -t rsa -f /etc/ssh/ssh_host_rsa_key -C '' -N '' 08:52:25(UTC) sysexec >>> chmod 600 /etc/ssh/ssh_host_rsa_key sysexec >>> chmod 600 /etc/ssh/ssh_host_rsa_key 08:52:25(UTC) sysexec >>> chmod 644 /etc/ssh/ssh_host_rsa_key.pub sysexec >>> chmod 644 /etc/ssh/ssh_host_rsa_key.pub 08:52:25(UTC) Creating SSH2 DSA host key /etc/ssh/ssh_host_dsa_key 08:52:25(UTC) sysexec >>> ssh-keygen -q -t dsa -f /etc/ssh/ssh_host_dsa_key -C '' -N '' sysexec >>> ssh-keygen -q -t dsa -f /etc/ssh/ssh_host_dsa_key -C '' -N '' 08:52:25(UTC) sysexec >>> chmod 600 /etc/ssh/ssh_host_dsa_key sysexec >>> chmod 600 /etc/ssh/ssh_host_dsa_key 08:52:25(UTC) sysexec >>> chmod 644 /etc/ssh/ssh_host_dsa_key.pub sysexec >>> chmod 644 /etc/ssh/ssh_host_dsa_key.pub 08:52:25(UTC) sysexec >>> cp -f /tmp/source/debug_files//sshd_config /etc/ssh//sshd_config sysexec >>> cp -f /tmp/source/debug_files//sshd_config /etc/ssh//sshd_config 08:52:25(UTC) Installing debug ssh key for root user 08:52:25(UTC) sysexec >>> cp -f /tmp/source/debug_files//debug_root_ssh_key /root/.ssh/authorized_keys sysexec >>> cp -f /tmp/source/debug_files//debug_root_ssh_key /root/.ssh/authorized_keys 08:52:25(UTC) sysexec >>> chmod 700 /root/.ssh sysexec >>> chmod 700 /root/.ssh 08:52:25(UTC) sysexec >>> chmod 600 /root/.ssh/authorized_keys sysexec >>> chmod 600 /root/.ssh/authorized_keys 08:52:25(UTC) Starting sshd 08:52:25(UTC) sysexec >>> service sshd start sysexec >>> service sshd start 08:52:25(UTC) ==========stdout Starting sshd: [ OK ] 08:52:25(UTC) sysexec >>> touch /tmp/SSHD_RUNNING sysexec >>> touch /tmp/SSHD_RUNNING 08:52:25(UTC) Step: Checking if hardware requirements met. 08:52:25(UTC) Checking for available memory. 08:52:25(UTC) Looks like we have enough memory: 2055444 kb end_request: I/O error, dev fd0, sector 0 end_request: I/O error, dev fd0, sector 0 end_request: I/O error, dev fd0, sector 0 end_request: I/O error, dev fd0, sector 0 end_request: I/O error, dev fd0, sector 0 end_request: I/O error, dev fd0, sector 0 end_request: I/O error, dev fd0, sector 0 end_request: I/O error, dev fd0, sector 0 end_request: I/O error, dev fd0, sector 0 end_request: I/O error, dev fd0, sector 0 end_request: I/O error, dev fd0, sector 0 end_request: I/O error, dev fd0, sector 0 end_request: I/O error, dev fd0, sector 0 end_request: I/O error, dev fd0, sector 0 end_request: I/O error, dev fd0, sector 0 end_request: I/O error, dev fd0, sector 0 end_request: I/O error, dev fd0, sector 0 end_request: I/O error, dev fd0, sector 0 end_request: I/O error, dev fd0, sector 0 end_request: I/O error, dev fd0, sector 0 end_request: I/O error, dev fd0, sector 0 end_request: I/O error, dev fd0, sector 0 end_request: I/O error, dev fd0, sector 0 end_request: I/O error, dev fd0, sector 0 end_request: I/O error, dev fd0, sector 0 end_request: I/O error, dev fd0, sector 0 end_request: I/O error, dev fd0, sector 0 end_request: I/O error, dev fd0, sector 0 end_request: I/O error, dev fd0, sector 0 end_request: I/O error, dev fd0, sector 0 end_request: I/O error, dev fd0, sector 0 end_request: I/O error, dev fd0, sector 0 end_request: I/O error, dev fd0, sector 0 end_request: I/O error, dev fd0, sector 0 end_request: I/O error, dev fd0, sector 0 end_request: I/O error, dev fd0, sector 0 end_request: I/O error, dev fd0, sector 0 end_request: I/O error, dev fd0, sector 0 end_request: I/O error, dev fd0, sector 0 end_request: I/O error, dev fd0, sector 0 end_request: I/O error, dev fd0, sector 0 end_request: I/O error, dev fd0, sector 0 end_request: I/O error, dev fd0, sector 0 end_request: I/O error, dev fd0, sector 0 end_request: I/O error, dev fd0, sector 0 end_request: I/O error, dev fd0, sector 0 end_request: I/O error, dev fd0, sector 0 end_request: I/O error, dev fd0, sector 0 end_request: I/O error, dev fd0, sector 0 end_request: I/O error, dev fd0, sector 0 end_request: I/O error, dev fd0, sector 0 end_request: I/O error, dev fd0, sector 0 end_request: I/O error, dev fd0, sector 0 end_request: I/O error, dev fd0, sector 0 end_request: I/O error, dev fd0, sector 0 end_request: I/O error, dev fd0, sector 0 end_request: I/O error, dev fd0, sector 0 end_request: I/O error, dev fd0, sector 0 end_request: I/O error, dev fd0, sector 0 end_request: I/O error, dev fd0, sector 0 end_request: I/O error, dev fd0, sector 0 end_request: I/O error, dev fd0, sector 0 end_request: I/O error, dev fd0, sector 0 end_request: I/O error, dev fd0, sector 0 end_request: I/O error, dev fd0, sector 0 end_request: I/O error, dev fd0, sector 0 end_request: I/O error, dev fd0, sector 0 end_request: I/O error, dev fd0, sector 0 end_request: I/O error, dev fd0, sector 0 end_request: I/O error, dev fd0, sector 0 end_request: I/O error, dev fd0, sector 0 end_request: I/O error, dev fd0, sector 0 end_request: I/O error, dev fd0, sector 0 end_request: I/O error, dev fd0, sector 0 end_request: I/O error, dev fd0, sector 0 end_request: I/O error, dev fd0, sector 0 end_request: I/O error, dev fd0, sector 0 end_request: I/O error, dev fd0, sector 0 end_request: I/O error, dev fd0, sector 0 end_request: I/O error, dev fd0, sector 0 end_request: I/O error, dev fd0, sector 0 end_request: I/O error, dev fd0, sector 0 end_request: I/O error, dev fd0, sector 0 end_request: I/O error, dev fd0, sector 0 end_request: I/O error, dev fd0, sector 0 end_request: I/O error, dev fd0, sector 0 end_request: I/O error, dev fd0, sector 0 end_request: I/O error, dev fd0, sector 0 end_request: I/O error, dev fd0, sector 0 end_request: I/O error, dev fd0, sector 0 end_request: I/O error, dev fd0, sector 0 end_request: I/O error, dev fd0, sector 0 end_request: I/O error, dev fd0, sector 0 end_request: I/O error, dev fd0, sector 0 end_request: I/O error, dev fd0, sector 0 end_request: I/O error, dev fd0, sector 0 end_request: I/O error, dev fd0, sector 0 end_request: I/O error, dev fd0, sector 0 end_request: I/O error, dev fd0, sector 0 end_request: I/O error, dev fd0, sector 0 end_request: I/O error, dev fd0, sector 0 end_request: I/O error, dev fd0, sector 0 end_request: I/O error, dev fd0, sector 0 end_request: I/O error, dev fd0, sector 0 end_request: I/O error, dev fd0, sector 0 end_request: I/O error, dev fd0, sector 0 end_request: I/O error, dev fd0, sector 0 end_request: I/O error, dev fd0, sector 0 end_request: I/O error, dev fd0, sector 0 end_request: I/O error, dev fd0, sector 0 end_request: I/O error, dev fd0, sector 0 end_request: I/O error, dev fd0, sector 0 end_request: I/O error, dev fd0, sector 0 end_request: I/O error, dev fd0, sector 0 end_request: I/O error, dev fd0, sector 0 end_request: I/O error, dev fd0, sector 0 end_request: I/O error, dev fd0, sector 0 end_request: I/O error, dev fd0, sector 0 end_request: I/O error, dev fd0, sector 0 end_request: I/O error, dev fd0, sector 0 end_request: I/O error, dev fd0, sector 0 end_request: I/O error, dev fd0, sector 0 end_request: I/O error, dev fd0, sector 0 end_request: I/O error, dev fd0, sector 0 end_request: I/O error, dev fd0, sector 0 end_request: I/O error, dev fd0, sector 0 end_request: I/O error, dev fd0, sector 0 end_request: I/O error, dev fd0, sector 0 end_request: I/O error, dev fd0, sector 0 end_request: I/O error, dev fd0, sector 0 end_request: I/O error, dev fd0, sector 0 end_request: I/O error, dev fd0, sector 0 end_request: I/O error, dev fd0, sector 0 end_request: I/O error, dev fd0, sector 0 end_request: I/O error, dev fd0, sector 0 end_request: I/O error, dev fd0, sector 0 end_request: I/O error, dev fd0, sector 0 end_request: I/O error, dev fd0, sector 0 end_request: I/O error, dev fd0, sector 0 end_request: I/O error, dev fd0, sector 0 end_request: I/O error, dev fd0, sector 0 end_request: I/O error, dev fd0, sector 0 end_request: I/O error, dev fd0, sector 0 end_request: I/O error, dev fd0, sector 0 end_request: I/O error, dev fd0, sector 0 end_request: I/O error, dev fd0, sector 0 end_request: I/O error, dev fd0, sector 0 end_request: I/O error, dev fd0, sector 0 end_request: I/O error, dev fd0, sector 0 end_request: I/O error, dev fd0, sector 0 end_request: I/O error, dev fd0, sector 0 end_request: I/O error, dev fd0, sector 0 end_request: I/O error, dev fd0, sector 0 end_request: I/O error, dev fd0, sector 0 end_request: I/O error, dev fd0, sector 0 end_request: I/O error, dev fd0, sector 0 end_request: I/O error, dev fd0, sector 0 end_request: I/O error, dev fd0, sector 0 end_request: I/O error, dev fd0, sector 0 end_request: I/O error, dev fd0, sector 0 end_request: I/O error, dev fd0, sector 0 end_request: I/O error, dev fd0, sector 0 end_request: I/O error, dev fd0, sector 0 end_request: I/O error, dev fd0, sector 0 end_request: I/O error, dev fd0, sector 0 end_request: I/O error, dev fd0, sector 0 end_request: I/O error, dev fd0, sector 0 end_request: I/O error, dev fd0, sector 0 end_request: I/O error, dev fd0, sector 0 end_request: I/O error, dev fd0, sector 0 end_request: I/O error, dev fd0, sector 0 end_request: I/O error, dev fd0, sector 0 end_request: I/O error, dev fd0, sector 0 end_request: I/O error, dev fd0, sector 0 end_request: I/O error, dev fd0, sector 0 end_request: I/O error, dev fd0, sector 0 end_request: I/O error, dev fd0, sector 0 end_request: I/O error, dev fd0, sector 0 end_request: I/O error, dev fd0, sector 0 end_request: I/O error, dev fd0, sector 0 end_request: I/O error, dev fd0, sector 0 end_request: I/O error, dev fd0, sector 0 end_request: I/O error, dev fd0, sector 0 end_request: I/O error, dev fd0, sector 0 end_request: I/O error, dev fd0, sector 0 end_request: I/O error, dev fd0, sector 0 end_request: I/O error, dev fd0, sector 0 end_request: I/O error, dev fd0, sector 0 08:52:32(UTC) Detected block devices: 08:52:32(UTC) {'/dev/sda': (8, 0, 104857600, 107.3741824, False)} 08:52:32(UTC) Usable block devices: 08:52:32(UTC) ['/dev/sda'] 08:52:32(UTC) Total size for all usable block devices: 107.37 Gb 08:52:32(UTC) Step: Install: Initializing. 08:52:32(UTC) Unmounting any previous mounts 08:52:32(UTC) sysexec >>> umount /tmp/mnt/sysimg/proc sysexec >>> umount /tmp/mnt/sysimg/proc 08:52:32(UTC) ==========stderr umount: /tmp/mnt/sysimg/proc: not found 08:52:32(UTC) sysexec >>> umount /tmp/mnt/sysimg/mnt/cdrom sysexec >>> umount /tmp/mnt/sysimg/mnt/cdrom 08:52:32(UTC) ==========stderr umount: /tmp/mnt/sysimg/mnt/cdrom: not found 08:52:32(UTC) sysexec >>> umount /tmp/mnt/sysimg/vservers sysexec >>> umount /tmp/mnt/sysimg/vservers 08:52:32(UTC) ==========stderr umount: /tmp/mnt/sysimg/vservers: not found 08:52:32(UTC) sysexec >>> umount /tmp/mnt/sysimg/sys sysexec >>> umount /tmp/mnt/sysimg/sys 08:52:32(UTC) ==========stderr umount: /tmp/mnt/sysimg/sys: not found 08:52:32(UTC) sysexec >>> umount /tmp/mnt/sysimg/dev sysexec >>> umount /tmp/mnt/sysimg/dev 08:52:32(UTC) ==========stderr umount: /tmp/mnt/sysimg/dev: not found 08:52:33(UTC) sysexec >>> umount /tmp/mnt/sysimg sysexec >>> umount /tmp/mnt/sysimg 08:52:33(UTC) ==========stderr umount: /tmp/mnt/sysimg: not found 08:52:33(UTC) Cleaning up any existing PlanetLab config files 08:52:33(UTC) Creating system image path 08:52:33(UTC) Step: Install: partitioning disks. 08:52:33(UTC) sysexec >>> swapoff /dev/mapper/planetlab-swap sysexec >>> swapoff /dev/mapper/planetlab-swap 08:52:33(UTC) ==========stderr swapoff: /dev/mapper/planetlab-swap: swapoff failed: No such file or directory 08:52:33(UTC) sysexec >>> vgscan sysexec >>> vgscan 08:52:33(UTC) ==========stdout Reading all physical volumes. This may take a while... 08:52:33(UTC) ==========stderr File descriptor 3 (/tmp/bm.log) leaked on vgscan invocation. Parent PID 616: /usr/bin/python No volume groups found 08:52:33(UTC) sysexec >>> vgchange -ay sysexec >>> vgchange -ay 08:52:33(UTC) ==========stderr File descriptor 3 (/tmp/bm.log) leaked on vgchange invocation. Parent PID 616: /usr/bin/python No volume groups found 08:52:33(UTC) sysexec >>> lvremove -f /dev/mapper/planetlab-root sysexec >>> lvremove -f /dev/mapper/planetlab-root 08:52:33(UTC) ==========stderr File descriptor 3 (/tmp/bm.log) leaked on lvremove invocation. Parent PID 616: /usr/bin/python Volume group "planetlab" not found Skipping volume group planetlab 08:52:33(UTC) sysexec >>> lvremove -f /dev/mapper/planetlab-swap sysexec >>> lvremove -f /dev/mapper/planetlab-swap 08:52:33(UTC) ==========stderr File descriptor 3 (/tmp/bm.log) leaked on lvremove invocation. Parent PID 616: /usr/bin/python Volume group "planetlab" not found Skipping volume group planetlab 08:52:33(UTC) sysexec >>> lvremove -f /dev/mapper/planetlab-vservers sysexec >>> lvremove -f /dev/mapper/planetlab-vservers 08:52:33(UTC) ==========stderr File descriptor 3 (/tmp/bm.log) leaked on lvremove invocation. Parent PID 616: /usr/bin/python Volume group "planetlab" not found Skipping volume group planetlab 08:52:33(UTC) sysexec >>> vgchange -an sysexec >>> vgchange -an 08:52:33(UTC) ==========stderr File descriptor 3 (/tmp/bm.log) leaked on vgchange invocation. Parent PID 616: /usr/bin/python No volume groups found 08:52:33(UTC) sysexec >>> vgremove -f planetlab sysexec >>> vgremove -f planetlab 08:52:33(UTC) ==========stderr File descriptor 3 (/tmp/bm.log) leaked on vgremove invocation. Parent PID 616: /usr/bin/python Volume group "planetlab" not found 08:52:33(UTC) Running vgscan for devices 08:52:33(UTC) sysexec >>> vgscan sysexec >>> vgscan 08:52:33(UTC) ==========stdout Reading all physical volumes. This may take a while... 08:52:33(UTC) ==========stderr File descriptor 3 (/tmp/bm.log) leaked on vgscan invocation. Parent PID 616: /usr/bin/python No volume groups found 08:52:33(UTC) Using pyparted 2.x 08:52:33(UTC) sysexec >>> dd if=/dev/zero of=/dev/sda bs=512 count=1 sysexec >>> dd if=/dev/zero of=/dev/sda bs=512 count=1 08:52:33(UTC) ==========stderr 1+0 records in 1+0 records out 512 bytes (512 B) copied, 0.0171804 s, 29.8 kB/s 08:52:33(UTC) Current disk for /dev/sda - partition type msdos parted.Disk instance -- type: msdos primaryPartitionCount: 1 lastPartitionNumber: 1 maxPrimaryPartitionCount: 4 partitions: [] device: PedDisk: <_ped.Disk object at 0x2169560> 08:52:33(UTC) Current dev for /dev/sda parted.Device instance -- model: ATA QEMU HARDDISK path: /dev/sda type: 1 sectorSize: 512 physicalSectorSize: 512 length: 209715200 openCount: 0 readOnly: False externalMode: False dirty: False bootDirty: False host: 1 did: 0 busy: False hardwareGeometry: (13054, 255, 63) biosGeometry: (13054, 255, 63) PedDevice: <_ped.Device object at 0x1f05ef0> 08:52:33(UTC) Successfully initialized /dev/sda 08:52:33(UTC) partitions=['/dev/sda1'] 08:52:33(UTC) sysexec >>> dd if=/dev/zero of=/dev/sda1 bs=512 count=1 sysexec >>> dd if=/dev/zero of=/dev/sda1 bs=512 count=1 08:52:33(UTC) ==========stderr 1+0 records in 1+0 records out 512 bytes (512 B) copied, 0.000911768 s, 562 kB/s 08:52:34(UTC) sysexec >>> pvcreate -ffy /dev/sda1 sysexec >>> pvcreate -ffy /dev/sda1 08:52:34(UTC) ==========stdout Physical volume "/dev/sda1" successfully created 08:52:34(UTC) ==========stderr File descriptor 3 (/tmp/bm.log) leaked on pvcreate invocation. Parent PID 616: /usr/bin/python 08:52:34(UTC) sysexec >>> vgcreate -s32M planetlab /dev/sda1 sysexec >>> vgcreate -s32M planetlab /dev/sda1 08:52:34(UTC) ==========stdout Volume group "planetlab" successfully created 08:52:34(UTC) ==========stderr File descriptor 3 (/tmp/bm.log) leaked on vgcreate invocation. Parent PID 616: /usr/bin/python 08:52:34(UTC) sysexec >>> lvcreate -L1G -nswap planetlab sysexec >>> lvcreate -L1G -nswap planetlab 08:52:34(UTC) ==========stdout Logical volume "swap" created 08:52:34(UTC) ==========stderr File descriptor 3 (/tmp/bm.log) leaked on lvcreate invocation. Parent PID 616: /usr/bin/python 08:52:34(UTC) sysexec >>> lvcreate -L14G -nroot planetlab sysexec >>> lvcreate -L14G -nroot planetlab 08:52:34(UTC) ==========stdout Logical volume "root" created 08:52:34(UTC) ==========stderr File descriptor 3 (/tmp/bm.log) leaked on lvcreate invocation. Parent PID 616: /usr/bin/python 08:52:34(UTC) sysexec >>> lvcreate -l2719 -nvservers planetlab sysexec >>> lvcreate -l2719 -nvservers planetlab 08:52:34(UTC) ==========stdout Logical volume "vservers" created 08:52:34(UTC) ==========stderr File descriptor 3 (/tmp/bm.log) leaked on lvcreate invocation. Parent PID 616: /usr/bin/python 08:52:34(UTC) sysexec >>> mkswap -f /dev/mapper/planetlab-swap sysexec >>> mkswap -f /dev/mapper/planetlab-swap 08:52:34(UTC) ==========stdout Setting up swapspace version 1, size = 1048572 KiB no label, UUID=cae9344d-5fc6-4f77-ae82-3af3c8f453e1 08:52:34(UTC) formatting root partition (/dev/mapper/planetlab-root). 08:52:34(UTC) sysexec >>> mkfs.ext2 -q -m 5 -j /dev/mapper/planetlab-root sysexec >>> mkfs.ext2 -q -m 5 -j /dev/mapper/planetlab-root 08:52:36(UTC) sysexec >>> tune2fs -c -1 -i 0 /dev/mapper/planetlab-root sysexec >>> tune2fs -c -1 -i 0 /dev/mapper/planetlab-root 08:52:36(UTC) ==========stdout tune2fs 1.41.12 (17-May-2010) Setting maximal mount count to -1 Setting interval between checks to 0 seconds 08:52:36(UTC) formatting vservers partition (/dev/mapper/planetlab-vservers). 08:52:36(UTC) sysexec >>> mkfs.ext2 -q -m 0 -j /dev/mapper/planetlab-vservers sysexec >>> mkfs.ext2 -q -m 0 -j /dev/mapper/planetlab-vservers 08:52:47(UTC) sysexec >>> tune2fs -c -1 -i 0 /dev/mapper/planetlab-vservers sysexec >>> tune2fs -c -1 -i 0 /dev/mapper/planetlab-vservers 08:52:47(UTC) ==========stdout tune2fs 1.41.12 (17-May-2010) Setting maximal mount count to -1 Setting interval between checks to 0 seconds 08:52:47(UTC) Block devices used (in lvm): ['/dev/sda'] 08:52:47(UTC) End of InstallPartitionDisks - PARTITIONS status - BEG 08:52:47(UTC) sysexec >>> vgdisplay sysexec >>> vgdisplay 08:52:47(UTC) ==========stdout --- Volume group --- VG Name planetlab System ID Format lvm2 Metadata Areas 1 Metadata Sequence No 4 VG Access read/write VG Status resizable MAX LV 0 Cur LV 3 Open LV 0 Max PV 0 Cur PV 1 Act PV 1 VG Size 99.97 GiB PE Size 32.00 MiB Total PE 3199 Alloc PE / Size 3199 / 99.97 GiB Free PE / Size 0 / 0 VG UUID yIQpOv-j207-CiM6-eOE9-utXT-IKbc-icnnVZ 08:52:47(UTC) ==========stderr File descriptor 3 (/tmp/bm.log) leaked on vgdisplay invocation. Parent PID 616: /usr/bin/python 08:52:47(UTC) sysexec >>> pvdisplay sysexec >>> pvdisplay 08:52:47(UTC) ==========stdout --- Physical volume --- PV Name /dev/sda1 VG Name planetlab PV Size 100.00 GiB / not usable 30.66 MiB Allocatable yes (but full) PE Size 32.00 MiB Total PE 3199 Free PE 0 Allocated PE 3199 PV UUID XhK0rb-NUbi-ESpx-HmwV-qA6o-7Tpr-wk7eWw 08:52:47(UTC) ==========stderr File descriptor 3 (/tmp/bm.log) leaked on pvdisplay invocation. Parent PID 616: /usr/bin/python 08:52:47(UTC) PARTITIONS[root]=/dev/mapper/planetlab-root 08:52:47(UTC) sysexec >>> ls -l /dev/mapper/planetlab-root sysexec >>> ls -l /dev/mapper/planetlab-root 08:52:47(UTC) ==========stdout lrwxrwxrwx 1 root root 7 Jan 19 08:52 /dev/mapper/planetlab-root -> ../dm-1 08:52:47(UTC) PARTITIONS[swap]=/dev/mapper/planetlab-swap 08:52:47(UTC) sysexec >>> ls -l /dev/mapper/planetlab-swap sysexec >>> ls -l /dev/mapper/planetlab-swap 08:52:47(UTC) ==========stdout lrwxrwxrwx 1 root root 7 Jan 19 08:52 /dev/mapper/planetlab-swap -> ../dm-0 08:52:47(UTC) PARTITIONS[vservers]=/dev/mapper/planetlab-vservers 08:52:47(UTC) sysexec >>> ls -l /dev/mapper/planetlab-vservers sysexec >>> ls -l /dev/mapper/planetlab-vservers 08:52:47(UTC) ==========stdout lrwxrwxrwx 1 root root 7 Jan 19 08:52 /dev/mapper/planetlab-vservers -> ../dm-2 08:52:47(UTC) End of InstallPartitionDisks - PARTITIONS status - END 08:52:47(UTC) Step: Install: bootstrapfs tarball (upgrade=False). 08:52:47(UTC) In InstallBootstrapFS - PARTITIONS status - BEG 08:52:47(UTC) sysexec >>> vgdisplay sysexec >>> vgdisplay 08:52:47(UTC) ==========stdout --- Volume group --- VG Name planetlab System ID Format lvm2 Metadata Areas 1 Metadata Sequence No 4 VG Access read/write VG Status resizable MAX LV 0 Cur LV 3 Open LV 0 Max PV 0 Cur PV 1 Act PV 1 VG Size 99.97 GiB PE Size 32.00 MiB Total PE 3199 Alloc PE / Size 3199 / 99.97 GiB Free PE / Size 0 / 0 VG UUID yIQpOv-j207-CiM6-eOE9-utXT-IKbc-icnnVZ 08:52:47(UTC) ==========stderr File descriptor 3 (/tmp/bm.log) leaked on vgdisplay invocation. Parent PID 616: /usr/bin/python 08:52:47(UTC) sysexec >>> pvdisplay sysexec >>> pvdisplay 08:52:47(UTC) ==========stdout --- Physical volume --- PV Name /dev/sda1 VG Name planetlab PV Size 100.00 GiB / not usable 30.66 MiB Allocatable yes (but full) PE Size 32.00 MiB Total PE 3199 Free PE 0 Allocated PE 3199 PV UUID XhK0rb-NUbi-ESpx-HmwV-qA6o-7Tpr-wk7eWw 08:52:47(UTC) ==========stderr File descriptor 3 (/tmp/bm.log) leaked on pvdisplay invocation. Parent PID 616: /usr/bin/python 08:52:47(UTC) PARTITIONS[root]=/dev/mapper/planetlab-root 08:52:47(UTC) sysexec >>> ls -l /dev/mapper/planetlab-root sysexec >>> ls -l /dev/mapper/planetlab-root 08:52:47(UTC) ==========stdout lrwxrwxrwx 1 root root 7 Jan 19 08:52 /dev/mapper/planetlab-root -> ../dm-1 08:52:47(UTC) PARTITIONS[swap]=/dev/mapper/planetlab-swap 08:52:47(UTC) sysexec >>> ls -l /dev/mapper/planetlab-swap sysexec >>> ls -l /dev/mapper/planetlab-swap 08:52:47(UTC) ==========stdout lrwxrwxrwx 1 root root 7 Jan 19 08:52 /dev/mapper/planetlab-swap -> ../dm-0 08:52:47(UTC) PARTITIONS[vservers]=/dev/mapper/planetlab-vservers 08:52:47(UTC) sysexec >>> ls -l /dev/mapper/planetlab-vservers sysexec >>> ls -l /dev/mapper/planetlab-vservers 08:52:47(UTC) ==========stdout lrwxrwxrwx 1 root root 7 Jan 19 08:52 /dev/mapper/planetlab-vservers -> ../dm-2 08:52:47(UTC) In InstallBootstrapFS - PARTITIONS status - END Ignoring breakpoint (BREAKPOINT_MODE=False) : we need to make /dev/mapper/* appear 08:52:47(UTC) turning on swap space 08:52:47(UTC) sysexec >>> swapon /dev/mapper/planetlab-swap sysexec >>> swapon /dev/mapper/planetlab-swap Adding 1048568k swap on /dev/mapper/planetlab-swap. Priority:-1 extents:1 across:1048568k D 08:52:47(UTC) mounting root file system 08:52:47(UTC) sysexec >>> mount -t ext3 /dev/mapper/planetlab-root /tmp/mnt/sysimg sysexec >>> mount -t ext3 /dev/mapper/planetlab-root /tmp/mnt/sysimg kjournald starting. Commit interval 5 seconds EXT3-fs (dm-1): using internal journal EXT3-fs (dm-1): mounted filesystem with ordered data mode 08:52:47(UTC) mounting vserver partition in root file system (type ext3) 08:52:47(UTC) sysexec >>> mount -t ext3 /dev/mapper/planetlab-vservers /tmp/mnt/sysimg/vservers sysexec >>> mount -t ext3 /dev/mapper/planetlab-vservers /tmp/mnt/sysimg/vservers kjournald starting. Commit interval 5 seconds EXT3-fs (dm-2): using internal journal EXT3-fs (dm-2): mounted filesystem with ordered data mode 08:52:47(UTC) Using compressed bootstrapfs images 08:52:47(UTC) Using nodefamily=onelab-f14-x86_64 08:52:47(UTC) Installing only core software 08:52:47(UTC) downloading /boot/bootstrapfs-onelab-f14-x86_64.tar.bz2 08:52:55(UTC) Done downloading (7 seconds) 08:52:55(UTC) downloading sha1sum for /boot/bootstrapfs-onelab-f14-x86_64.tar.bz2 08:52:55(UTC) verifying sha1sum for /boot/bootstrapfs-onelab-f14-x86_64.tar.bz2 08:52:55(UTC) extracting /tmp/mnt/sysimg/bootstrapfs-onelab-f14-x86_64.tar.bz2 in /tmp/mnt/sysimg 08:52:55(UTC) sysexec >>> tar -C /tmp/mnt/sysimg -xpf /tmp/mnt/sysimg/bootstrapfs-onelab-f14-x86_64.tar.bz2 -j sysexec >>> tar -C /tmp/mnt/sysimg -xpf /tmp/mnt/sysimg/bootstrapfs-onelab-f14-x86_64.tar.bz2 -j 08:53:37(UTC) Done extracting (42 seconds) 08:53:37(UTC) Copying resolv.conf to temp dir 08:53:37(UTC) sysexec >>> cp /etc/resolv.conf /tmp/mnt/sysimg/etc/ sysexec >>> cp /etc/resolv.conf /tmp/mnt/sysimg/etc/ 08:53:37(UTC) Copying boot server certificates and public key 08:53:37(UTC) sysexec (shell mode) >>> gpg --homedir=/root --export --armor --no-default-keyring --keyring /tmp/mnt/sysimg/usr/boot/pubring.gpg > /tmp/mnt/sysimg/etc/pki/rpm-gpg/RPM-GPG-KEY-planetlabsysexec (shell mode) >>> gpg --homedir=/root --export --armor --no-default-keyring --keyring /tmp/mnt/sysimg/usr/boot/pubring.gpg > /tmp/mnt/sysimg/etc/pki/rpm-gpg/RPM-GPG-KEY-planetlab 08:53:37(UTC) sysexec >>> chroot /tmp/mnt/sysimg rpm --import /etc/pki/rpm-gpg/RPM-GPG-KEY-planetlab sysexec >>> chroot /tmp/mnt/sysimg rpm --import /etc/pki/rpm-gpg/RPM-GPG-KEY-planetlab 08:53:38(UTC) Step: Install: Writing configuration files. 08:53:38(UTC) Setting local time to UTC 08:53:38(UTC) sysexec >>> chroot /tmp/mnt/sysimg ln -sf /usr/share/zoneinfo/UTC /etc/localtime sysexec >>> chroot /tmp/mnt/sysimg ln -sf /usr/share/zoneinfo/UTC /etc/localtime 08:53:38(UTC) Creating system directory /etc/planetlab 08:53:38(UTC) Writing system /etc/fstab 08:53:38(UTC) Writing system /etc/issue 08:53:38(UTC) Setting up authentication (non-ssh) 08:53:38(UTC) sysexec >>> chroot /tmp/mnt/sysimg authconfig --nostart --kickstart --enablemd5 --enableshadow sysexec >>> chroot /tmp/mnt/sysimg authconfig --nostart --kickstart --enablemd5 --enableshadow 08:53:38(UTC) sysexec (shell mode) >>> sed -e 's/^root\:\:/root\:*\:/g' /tmp/mnt/sysimg/etc/shadow > /tmp/mnt/sysimg/etc/shadow.newsysexec (shell mode) >>> sed -e 's/^root\:\:/root\:*\:/g' /tmp/mnt/sysimg/etc/shadow > /tmp/mnt/sysimg/etc/shadow.new 08:53:38(UTC) sysexec >>> chroot /tmp/mnt/sysimg mv /etc/shadow.new /etc/shadow sysexec >>> chroot /tmp/mnt/sysimg mv /etc/shadow.new /etc/shadow 08:53:38(UTC) sysexec >>> chroot /tmp/mnt/sysimg chmod 400 /etc/shadow sysexec >>> chroot /tmp/mnt/sysimg chmod 400 /etc/shadow 08:53:38(UTC) Writing node install_version 08:53:38(UTC) Creating ssh host keys 08:53:38(UTC) Generating SSH1 RSA host key /etc/ssh/ssh_host_key (mandatory success=False) sysexec (shell mode) >>> chroot /usr/bin/ssh-keygen -q -t rsa1 -f /etc/ssh/ssh_host_key -C '' -N '' <__main__.log instance at 0x2161ab8> /bin/sh: -c: line 0: syntax error near unexpected token `newline' /bin/sh: -c: line 0: `chroot /usr/bin/ssh-keygen -q -t rsa1 -f /etc/ssh/ssh_host_key -C '' -N '' <__main__.log instance at 0x2161ab8>' 08:53:38(UTC) sysexec >>> chmod 600 /tmp/mnt/sysimg//etc/ssh/ssh_host_key sysexec >>> chmod 600 /tmp/mnt/sysimg//etc/ssh/ssh_host_key 08:53:38(UTC) ==========stderr chmod: cannot access `/tmp/mnt/sysimg//etc/ssh/ssh_host_key': No such file or directory 08:53:38(UTC) sysexec >>> chmod 644 /tmp/mnt/sysimg//etc/ssh/ssh_host_key.pub sysexec >>> chmod 644 /tmp/mnt/sysimg//etc/ssh/ssh_host_key.pub 08:53:38(UTC) ==========stderr chmod: cannot access `/tmp/mnt/sysimg//etc/ssh/ssh_host_key.pub': No such file or directory 08:53:38(UTC) Generating SSH2 RSA host key /etc/ssh/ssh_host_rsa_key (mandatory success=True) 08:53:38(UTC) sysexec >>> chroot /tmp/mnt/sysimg /usr/bin/ssh-keygen -q -t rsa -f /etc/ssh/ssh_host_rsa_key -C '' -N '' sysexec >>> chroot /tmp/mnt/sysimg /usr/bin/ssh-keygen -q -t rsa -f /etc/ssh/ssh_host_rsa_key -C '' -N '' 08:53:38(UTC) sysexec >>> chmod 600 /tmp/mnt/sysimg//etc/ssh/ssh_host_rsa_key sysexec >>> chmod 600 /tmp/mnt/sysimg//etc/ssh/ssh_host_rsa_key 08:53:38(UTC) sysexec >>> chmod 644 /tmp/mnt/sysimg//etc/ssh/ssh_host_rsa_key.pub sysexec >>> chmod 644 /tmp/mnt/sysimg//etc/ssh/ssh_host_rsa_key.pub 08:53:38(UTC) Generating SSH2 DSA host key /etc/ssh/ssh_host_dsa_key (mandatory success=True) 08:53:38(UTC) sysexec >>> chroot /tmp/mnt/sysimg /usr/bin/ssh-keygen -q -t dsa -f /etc/ssh/ssh_host_dsa_key -C '' -N '' sysexec >>> chroot /tmp/mnt/sysimg /usr/bin/ssh-keygen -q -t dsa -f /etc/ssh/ssh_host_dsa_key -C '' -N '' 08:53:38(UTC) sysexec >>> chmod 600 /tmp/mnt/sysimg//etc/ssh/ssh_host_dsa_key sysexec >>> chmod 600 /tmp/mnt/sysimg//etc/ssh/ssh_host_dsa_key 08:53:38(UTC) sysexec >>> chmod 644 /tmp/mnt/sysimg//etc/ssh/ssh_host_dsa_key.pub sysexec >>> chmod 644 /tmp/mnt/sysimg//etc/ssh/ssh_host_dsa_key.pub 08:53:38(UTC) Step: Install: Shutting down installer. 08:53:38(UTC) Shutting down swap 08:53:38(UTC) sysexec >>> swapoff /dev/mapper/planetlab-swap sysexec >>> swapoff /dev/mapper/planetlab-swap 08:53:38(UTC) Step: Running Ansible Hook 08:53:38(UTC) No Ansible directive. Skipping. 08:53:38(UTC) Step: Updating node boot state at PLC. 08:53:38(UTC) Successfully updated boot state for this node at PLC 08:53:38(UTC) Step: Starting fallback sshd. 08:53:38(UTC) sysexec >>> cp -f /tmp/source/debug_files//sshd_config /etc/ssh//sshd_config sysexec >>> cp -f /tmp/source/debug_files//sshd_config /etc/ssh//sshd_config 08:53:38(UTC) Installing debug ssh key for root user 08:53:38(UTC) sysexec >>> cp -f /tmp/source/debug_files//debug_root_ssh_key /root/.ssh/authorized_keys sysexec >>> cp -f /tmp/source/debug_files//debug_root_ssh_key /root/.ssh/authorized_keys 08:53:38(UTC) sysexec >>> chmod 700 /root/.ssh sysexec >>> chmod 700 /root/.ssh 08:53:38(UTC) sysexec >>> chmod 600 /root/.ssh/authorized_keys sysexec >>> chmod 600 /root/.ssh/authorized_keys 08:53:38(UTC) sshd is already running 08:53:38(UTC) Step: Install: Initializing. 08:53:38(UTC) Unmounting any previous mounts 08:53:38(UTC) sysexec >>> umount /tmp/mnt/sysimg/proc sysexec >>> umount /tmp/mnt/sysimg/proc 08:53:38(UTC) ==========stderr umount: /tmp/mnt/sysimg/proc: not mounted 08:53:38(UTC) sysexec >>> umount /tmp/mnt/sysimg/mnt/cdrom sysexec >>> umount /tmp/mnt/sysimg/mnt/cdrom 08:53:38(UTC) ==========stderr umount: /tmp/mnt/sysimg/mnt/cdrom: not mounted 08:53:38(UTC) sysexec >>> umount /tmp/mnt/sysimg/vservers sysexec >>> umount /tmp/mnt/sysimg/vservers 08:53:38(UTC) sysexec >>> umount /tmp/mnt/sysimg/sys sysexec >>> umount /tmp/mnt/sysimg/sys 08:53:38(UTC) ==========stderr umount: /tmp/mnt/sysimg/sys: not mounted 08:53:38(UTC) sysexec >>> umount /tmp/mnt/sysimg/dev sysexec >>> umount /tmp/mnt/sysimg/dev 08:53:38(UTC) ==========stderr umount: /tmp/mnt/sysimg/dev: not mounted 08:53:38(UTC) sysexec >>> umount /tmp/mnt/sysimg sysexec >>> umount /tmp/mnt/sysimg 08:53:39(UTC) Cleaning up any existing PlanetLab config files 08:53:39(UTC) Creating system image path 08:53:39(UTC) Step: Validating node installation. 08:53:39(UTC) sysexec >>> vgscan sysexec >>> vgscan 08:53:39(UTC) ==========stdout Reading all physical volumes. This may take a while... Found volume group "planetlab" using metadata type lvm2 08:53:39(UTC) ==========stderr File descriptor 3 (/tmp/bm.log) leaked on vgscan invocation. Parent PID 616: /usr/bin/python 08:53:39(UTC) sysexec >>> vgchange -ay planetlab sysexec >>> vgchange -ay planetlab 08:53:39(UTC) ==========stdout 3 logical volume(s) in volume group "planetlab" now active 08:53:39(UTC) ==========stderr File descriptor 3 (/tmp/bm.log) leaked on vgchange invocation. Parent PID 616: /usr/bin/python 08:53:39(UTC) fsck root file system 08:53:39(UTC) sysexec >>> e2fsck -v -p /dev/mapper/planetlab-root sysexec >>> e2fsck -v -p /dev/mapper/planetlab-root 08:53:39(UTC) ==========stdout /dev/mapper/planetlab-root: clean, 19611/917504 files, 244526/3670016 blocks 08:53:39(UTC) sysexec >>> tune2fs -c -1 -i 0 /dev/mapper/planetlab-root sysexec >>> tune2fs -c -1 -i 0 /dev/mapper/planetlab-root 08:53:39(UTC) ==========stdout tune2fs 1.41.12 (17-May-2010) Setting maximal mount count to -1 Setting interval between checks to 0 seconds 08:53:39(UTC) fsck vservers file system 08:53:39(UTC) sysexec >>> e2fsck -v -p /dev/mapper/planetlab-vservers sysexec >>> e2fsck -v -p /dev/mapper/planetlab-vservers 08:53:39(UTC) ==========stdout /dev/mapper/planetlab-vservers: clean, 24360/5570560 files, 512236/22274048 blocks 08:53:39(UTC) sysexec >>> tune2fs -c -1 -i 0 /dev/mapper/planetlab-vservers sysexec >>> tune2fs -c -1 -i 0 /dev/mapper/planetlab-vservers 08:53:39(UTC) ==========stdout tune2fs 1.41.12 (17-May-2010) Setting maximal mount count to -1 Setting interval between checks to 0 seconds 08:53:39(UTC) mounting root file system 08:53:39(UTC) sysexec >>> mount -t ext3 /dev/mapper/planetlab-root /tmp/mnt/sysimg sysexec >>> mount -t ext3 /dev/mapper/planetlab-root /tmp/mnt/sysimg kjournald starting. Commit interval 5 seconds EXT3-fs (dm-1): using internal journal EXT3-fs (dm-1): mounted filesystem with ordered data mode 08:53:39(UTC) mounting /proc 08:53:39(UTC) sysexec >>> mount -t proc none /tmp/mnt/sysimg/proc sysexec >>> mount -t proc none /tmp/mnt/sysimg/proc 08:53:39(UTC) mounting vservers partition in root file system 08:53:39(UTC) sysexec >>> mount -t ext3 /dev/mapper/planetlab-vservers /tmp/mnt/sysimg/vservers sysexec >>> mount -t ext3 /dev/mapper/planetlab-vservers /tmp/mnt/sysimg/vservers kjournald starting. Commit interval 5 seconds EXT3-fs (dm-2): using internal journal EXT3-fs (dm-2): mounted filesystem with ordered data mode 08:53:39(UTC) Checking for a custom kernel 08:53:39(UTC) Updated /etc/planetlab/node_id 08:53:39(UTC) Node installation appears to be ok 08:53:39(UTC) Step: WriteModProbeConfig. Using kernel version 2.6.32-36.onelab.x86_64 08:53:39(UTC) Contents of new modprobe.conf file: 08:53:39(UTC) # Written out by BootManager alias eth0 e1000 alias scsi_hostadapter0 ata_piix alias scsi_hostadapter1 pata_acpi options ata_generic all_generic_ide=1 08:53:39(UTC) End contents of new modprobe.conf file. 08:53:39(UTC) Step: Install: Writing Network Configuration files. 08:53:39(UTC) Writing /etc/planetlab/plc_config 08:53:39(UTC) getting via https://vplc05.pl.sophia.inria.fr/PlanetLabConf/get_plc_config.php 08:53:39(UTC) Done 08:53:39(UTC) Writing /etc/hosts 08:53:39(UTC) net:InitInterfaces interface 1: {'last_updated': None, 'network': '138.96.112.0', 'ip': '138.96.112.105', 'dns1': '138.96.112.1', 'hostname': None, 'netmask': '255.255.248.0', 'interface_tag_ids': [], 'interface_id': 1, 'broadcast': '138.96.119.255', 'method': 'static', 'mac': '02:34:56:00:00:05', 'node_id': 1, 'gateway': '138.96.112.250', 'dns2': '138.96.112.2', 'is_primary': True, 'type': 'ipv4', 'bwlimit': None} 08:53:39(UTC) net:InitInterfaces macs = {'00:00:00:00:00:00': 'lo', '02:34:56:00:00:05': 'eth0'} 08:53:39(UTC) net:InitInterfaces ips = {'138.96.112.105': 'eth0', '127.0.0.1': 'lo'} 08:53:39(UTC) net:InitInterfaces orig_ifname = eth0 08:53:39(UTC) net:InitInterfaces: Device map: {'eth0': {'USERCTL': 'no', 'DNS2': '138.96.112.2', 'DNS1': '138.96.112.1', 'IPADDR': '138.96.112.105', 'PRIMARY': 'yes', 'GATEWAY': '138.96.112.250', 'NETMASK': '255.255.248.0', 'BOOTPROTO': 'static', 'HWADDR': '02:34:56:00:00:05', 'ONBOOT': 'yes'}} 08:53:39(UTC) net:InitInterfaces adding configuration for eth0 08:53:39(UTC) Step: Checking for unused disks to add to LVM. 08:53:39(UTC) In CheckForNewDisks - PARTITIONS status - BEG 08:53:39(UTC) sysexec >>> vgdisplay sysexec >>> vgdisplay 08:53:39(UTC) ==========stdout --- Volume group --- VG Name planetlab System ID Format lvm2 Metadata Areas 1 Metadata Sequence No 4 VG Access read/write VG Status resizable MAX LV 0 Cur LV 3 Open LV 2 Max PV 0 Cur PV 1 Act PV 1 VG Size 99.97 GiB PE Size 32.00 MiB Total PE 3199 Alloc PE / Size 3199 / 99.97 GiB Free PE / Size 0 / 0 VG UUID yIQpOv-j207-CiM6-eOE9-utXT-IKbc-icnnVZ 08:53:39(UTC) ==========stderr File descriptor 3 (/tmp/bm.log) leaked on vgdisplay invocation. Parent PID 616: /usr/bin/python 08:53:39(UTC) sysexec >>> pvdisplay sysexec >>> pvdisplay 08:53:39(UTC) ==========stdout --- Physical volume --- PV Name /dev/sda1 VG Name planetlab PV Size 100.00 GiB / not usable 30.66 MiB Allocatable yes (but full) PE Size 32.00 MiB Total PE 3199 Free PE 0 Allocated PE 3199 PV UUID XhK0rb-NUbi-ESpx-HmwV-qA6o-7Tpr-wk7eWw 08:53:39(UTC) ==========stderr File descriptor 3 (/tmp/bm.log) leaked on pvdisplay invocation. Parent PID 616: /usr/bin/python 08:53:39(UTC) PARTITIONS[root]=/dev/mapper/planetlab-root 08:53:39(UTC) sysexec >>> ls -l /dev/mapper/planetlab-root sysexec >>> ls -l /dev/mapper/planetlab-root 08:53:39(UTC) ==========stdout lrwxrwxrwx 1 root root 7 Jan 19 08:52 /dev/mapper/planetlab-root -> ../dm-1 08:53:39(UTC) PARTITIONS[swap]=/dev/mapper/planetlab-swap 08:53:39(UTC) sysexec >>> ls -l /dev/mapper/planetlab-swap sysexec >>> ls -l /dev/mapper/planetlab-swap 08:53:39(UTC) ==========stdout lrwxrwxrwx 1 root root 7 Jan 19 08:52 /dev/mapper/planetlab-swap -> ../dm-0 08:53:39(UTC) PARTITIONS[vservers]=/dev/mapper/planetlab-vservers 08:53:39(UTC) sysexec >>> ls -l /dev/mapper/planetlab-vservers sysexec >>> ls -l /dev/mapper/planetlab-vservers 08:53:39(UTC) ==========stdout lrwxrwxrwx 1 root root 7 Jan 19 08:52 /dev/mapper/planetlab-vservers -> ../dm-2 08:53:39(UTC) In CheckForNewDisks - PARTITIONS status - END 08:53:39(UTC) Checking device /dev/sda to see if it is part of the volume group. 08:53:39(UTC) sysexec (shell mode) >>> pvdisplay /dev/sda1 | grep -q planetlabsysexec (shell mode) >>> pvdisplay /dev/sda1 | grep -q planetlab File descriptor 3 (/tmp/bm.log) leaked on pvdisplay invocation. Parent PID 1438: /bin/sh 08:53:39(UTC) It appears /dev/sda is part of the volume group, continuing. 08:53:39(UTC) No new disk devices to add to volume group. 08:53:39(UTC) Step: Sending hardware configuration to PLC. 08:53:39(UTC) step SendHardwareConfigToPLC Not implemented, continuing. 08:53:39(UTC) Step: Chain booting node. 08:53:39(UTC) In ChainBootNode - PARTITIONS status - BEG 08:53:39(UTC) sysexec >>> vgdisplay sysexec >>> vgdisplay 08:53:39(UTC) ==========stdout --- Volume group --- VG Name planetlab System ID Format lvm2 Metadata Areas 1 Metadata Sequence No 4 VG Access read/write VG Status resizable MAX LV 0 Cur LV 3 Open LV 2 Max PV 0 Cur PV 1 Act PV 1 VG Size 99.97 GiB PE Size 32.00 MiB Total PE 3199 Alloc PE / Size 3199 / 99.97 GiB Free PE / Size 0 / 0 VG UUID yIQpOv-j207-CiM6-eOE9-utXT-IKbc-icnnVZ 08:53:39(UTC) ==========stderr File descriptor 3 (/tmp/bm.log) leaked on vgdisplay invocation. Parent PID 616: /usr/bin/python 08:53:39(UTC) sysexec >>> pvdisplay sysexec >>> pvdisplay 08:53:39(UTC) ==========stdout --- Physical volume --- PV Name /dev/sda1 VG Name planetlab PV Size 100.00 GiB / not usable 30.66 MiB Allocatable yes (but full) PE Size 32.00 MiB Total PE 3199 Free PE 0 Allocated PE 3199 PV UUID XhK0rb-NUbi-ESpx-HmwV-qA6o-7Tpr-wk7eWw 08:53:39(UTC) ==========stderr File descriptor 3 (/tmp/bm.log) leaked on pvdisplay invocation. Parent PID 616: /usr/bin/python 08:53:39(UTC) PARTITIONS[root]=/dev/mapper/planetlab-root 08:53:39(UTC) sysexec >>> ls -l /dev/mapper/planetlab-root sysexec >>> ls -l /dev/mapper/planetlab-root 08:53:39(UTC) ==========stdout lrwxrwxrwx 1 root root 7 Jan 19 08:52 /dev/mapper/planetlab-root -> ../dm-1 08:53:39(UTC) PARTITIONS[swap]=/dev/mapper/planetlab-swap 08:53:39(UTC) sysexec >>> ls -l /dev/mapper/planetlab-swap sysexec >>> ls -l /dev/mapper/planetlab-swap 08:53:39(UTC) ==========stdout lrwxrwxrwx 1 root root 7 Jan 19 08:52 /dev/mapper/planetlab-swap -> ../dm-0 08:53:39(UTC) PARTITIONS[vservers]=/dev/mapper/planetlab-vservers 08:53:39(UTC) sysexec >>> ls -l /dev/mapper/planetlab-vservers sysexec >>> ls -l /dev/mapper/planetlab-vservers 08:53:39(UTC) ==========stdout lrwxrwxrwx 1 root root 7 Jan 19 08:52 /dev/mapper/planetlab-vservers -> ../dm-2 08:53:39(UTC) In ChainBootNode - PARTITIONS status - END 08:53:39(UTC) Updated /etc/planetlab/session 08:53:39(UTC) Updating configuration files. 08:53:39(UTC) sysexec >>> chroot /tmp/mnt/sysimg /usr/bin/env python /usr/share/NodeManager/conf_files.py --noscripts sysexec >>> chroot /tmp/mnt/sysimg /usr/bin/env python /usr/share/NodeManager/conf_files.py --noscripts 08:53:43(UTC) Running node update. 08:53:43(UTC) sysexec >>> chroot /tmp/mnt/sysimg /usr/bin/NodeUpdate.py start noreboot sysexec >>> chroot /tmp/mnt/sysimg /usr/bin/NodeUpdate.py start noreboot 08:54:07(UTC) ==========stdout Config time: 0.005 Yum Version: 3.2.28 Setting up Package Sacks pkgsack time: 14.981 rpmdb time: 0.000 Setting up Update Process Building updates object up:Obs Init time: 0.271 up:simple updates time: 0.117 up:obs time: 0.033 up:condense time: 0.000 updates time: 1.060 No Packages marked for Update Config time: 0.003 Yum Version: 3.2.28 Setting up Package Sacks pkgsack time: 0.027 rpmdb time: 0.000 Setting up Update Process Building updates object up:Obs Init time: 0.304 up:simple updates time: 0.147 up:obs time: 0.037 up:condense time: 0.000 updates time: 1.008 No Packages marked for Update Config time: 0.004 Yum Version: 3.2.28 Setting up Package Sacks pkgsack time: 0.034 rpmdb time: 0.000 Setting up Install Process Checking for virtual provide or file-provide for nodemanager-lxc No package nodemanager-lxc available. Config time: 0.003 Yum Version: 3.2.28 Setting up Package Sacks pkgsack time: 0.026 rpmdb time: 0.000 Setting up Update Process Building updates object up:Obs Init time: 0.238 up:simple updates time: 0.176 up:obs time: 0.048 up:condense time: 0.000 updates time: 0.978 No Packages marked for Update Config time: 0.004 Yum Version: 3.2.28 Setting up Package Sacks pkgsack time: 0.033 rpmdb time: 0.000 Setting up Group Process group time: 0.847 Adding package openssh-clients from group planetlab Building updates object up:Obs Init time: 0.308 up:simple updates time: 0.219 up:obs time: 0.041 up:condense time: 0.000 updates time: 1.203 Package openssh-clients-5.5p1-24.fc14.2.x86_64 already installed and latest version Adding package util-vserver-sysv from group planetlab Package util-vserver-sysv-0.30.216-21.x86_64 already installed and latest version Adding package iputils from group planetlab Package iputils-20100418-3.fc14.x86_64 already installed and latest version Adding package kbd from group planetlab Package kbd-1.15-11.fc14.x86_64 already installed and latest version Adding package iproute from group planetlab Package iproute-2.6.35-9.fc14.x86_64 already installed and latest version Adding package rsyslog from group planetlab Package rsyslog-4.6.3-3.fc14.x86_64 already installed and latest version Adding package tmpwatch from group planetlab Package tmpwatch-2.10-1.fc14.x86_64 already installed and latest version Adding package util-vserver-core from group planetlab Package util-vserver-core-0.30.216-21.x86_64 already installed and latest version Adding package vsys-scripts from group planetlab Package vsys-scripts-0.95-51.onelab.x86_64 already installed and latest version Adding package basesystem from group planetlab Package basesystem-10.0-3.noarch already installed and latest version Adding package openvpn from group planetlab Package openvpn-2.1.1-2.fc13.x86_64 already installed and latest version Adding package iptables from group planetlab Package iptables-1.4.10-5.onelab.x86_64 already installed and latest version Adding package psacct from group planetlab Package psacct-6.5.4-5.fc14.x86_64 already installed and latest version Adding package PyXML from group planetlab Package PyXML-0.8.4-25.fc14.x86_64 already installed and latest version Adding package python from group planetlab Package python-2.7-8.fc14.1.x86_64 already installed and latest version Adding package cpio from group planetlab Package cpio-2.11-2.fc14.x86_64 already installed and latest version Adding package python3 from group planetlab Package python3-3.1.2-14.fc14.x86_64 already installed and latest version Adding package dhclient from group planetlab Package 12:dhclient-4.2.0-23.P2.fc14.x86_64 already installed and latest version Adding package madwifi from group planetlab No package named madwifi available to be installed Adding package nrpe from group planetlab Package nrpe-2.12-16.fc14.x86_64 already installed and latest version Adding package vsys from group planetlab Package vsys-0.99-3.onelab.x86_64 already installed and latest version Adding package libnl from group planetlab Package libnl-1.1-14.fc14.x86_64 already installed and latest version Adding package ipfwroot from group planetlab Package ipfwroot-3-2.6.32.36.1.onelab.2016.01.19.x86_64 already installed and latest version Adding package kernel from group planetlab Package kernel-2.6.32-36.onelab.x86_64 already installed and latest version Adding package parted from group planetlab Package parted-2.3-5.fc14.x86_64 already installed and latest version Adding package vconfig from group planetlab Package vconfig-1.9-8.fc12.x86_64 already installed and latest version Adding package vserver-sliceimage from group planetlab Package vserver-sliceimage-5.1-11.onelab.2016.01.19.noarch already installed and latest version Adding package ed from group planetlab Package ed-1.4-2.fc14.x86_64 already installed and latest version Adding package udev from group planetlab Package udev-161-10.fc14.x86_64 already installed and latest version Adding package monitor-client from group planetlab Package monitor-client-3.1-6.onelab.x86_64 already installed and latest version Adding package setserial from group planetlab Package setserial-2.17-26.fc14.x86_64 already installed and latest version Adding package mailcap from group planetlab Package mailcap-2.1.35-1.fc14.noarch already installed and latest version Adding package rsync from group planetlab Package rsync-3.0.8-2.fc14.x86_64 already installed and latest version Adding package sliceimage-system-onelab-f14-x86_64 from group planetlab Package sliceimage-system-onelab-f14-x86_64-5.1-11.2016.01.19.x86_64 already installed and latest version Adding package glibc from group planetlab Package glibc-2.13-2.x86_64 already installed and latest version Adding package bc from group planetlab Package bc-1.06.95-2.fc14.x86_64 already installed and latest version Adding package shadow-utils from group planetlab Package 2:shadow-utils-4.1.4.2-11.fc14.x86_64 already installed and latest version Adding package emacs-nox from group planetlab Package 1:emacs-nox-23.2-7.fc14.x86_64 already installed and latest version Adding package util-linux-ng from group planetlab Package util-linux-ng-2.18-4.8.fc14.x86_64 already installed and latest version Adding package sendmail from group planetlab Package sendmail-8.14.4-10.fc14.x86_64 already installed and latest version Adding package ntp from group planetlab Package ntp-4.2.6p3-0.1.rc10.fc14.x86_64 already installed and latest version Adding package ipod from group planetlab Package ipod-2.2-1.onelab.x86_64 already installed and latest version Adding package fprobe-ulog from group planetlab Package fprobe-ulog-1.1.4-3.onelab.x86_64 already installed and latest version Adding package wget from group planetlab Package wget-1.12-4.fc14.x86_64 already installed and latest version Adding package bash from group planetlab Package bash-4.1.7-4.fc14.x86_64 already installed and latest version Adding package rootfiles from group planetlab Package rootfiles-8.1-6.fc12.noarch already installed and latest version Adding package ethtool from group planetlab Package 2:ethtool-2.6.39-1.fc14.x86_64 already installed and latest version Adding package bind-utils from group planetlab Package 32:bind-utils-9.7.4-2.P1.fc14.x86_64 already installed and latest version Adding package yum from group planetlab Package yum-3.2.28-7.fc14.noarch already installed and latest version Adding package lsof from group planetlab Package lsof-4.83-2.fc14.x86_64 already installed and latest version Adding package lvm2 from group planetlab Package lvm2-2.02.84-2.fc14.x86_64 already installed and latest version Adding package rpm from group planetlab Package rpm-4.8.1-7.fc14.x86_64 already installed and latest version Adding package vim-minimal from group planetlab Package 2:vim-minimal-7.3.315-1.fc14.x86_64 already installed and latest version Adding package util-vserver-legacy from group planetlab Package util-vserver-legacy-0.30.216-21.x86_64 already installed and latest version Adding package codemux from group planetlab Package codemux-0.1-15.onelab.x86_64 already installed and latest version Adding package perl from group planetlab Package 4:perl-5.12.4-148.fc14.x86_64 already installed and latest version Adding package util-vserver-build from group planetlab Package util-vserver-build-0.30.216-21.x86_64 already installed and latest version Adding package dracut from group planetlab Package dracut-006-6.fc14.noarch already installed and latest version Adding package tcpdump from group planetlab Package 14:tcpdump-4.1.1-1.fc14.x86_64 already installed and latest version Adding package rsh from group planetlab Package rsh-0.17-63.fc14.x86_64 already installed and latest version Adding package NodeUpdate from group planetlab Package NodeUpdate-0.5-14.onelab.x86_64 already installed and latest version Adding package openssh-server from group planetlab Package openssh-server-5.5p1-24.fc14.2.x86_64 already installed and latest version Adding package nfs-utils from group planetlab Package 1:nfs-utils-1.2.3-6.fc14.x86_64 already installed and latest version Adding package util-vserver from group planetlab Package util-vserver-0.30.216-21.x86_64 already installed and latest version Adding package sliceimage-onelab-f14-x86_64 from group planetlab Package sliceimage-onelab-f14-x86_64-5.1-11.2016.01.19.x86_64 already installed and latest version Adding package authconfig from group planetlab Package authconfig-6.1.11-1.fc14.x86_64 already installed and latest version Adding package hdparm from group planetlab Package hdparm-9.27-1.fc13.x86_64 already installed and latest version Adding package setup from group planetlab Package setup-2.8.28-2.fc14.noarch already installed and latest version Adding package initscripts from group planetlab Package initscripts-9.20.2-1.fc14.1.x86_64 already installed and latest version Adding package pl_sshd from group planetlab Package pl_sshd-1.0-11.onelab.x86_64 already installed and latest version Adding package procps from group planetlab Package procps-3.2.8-15.fc14.x86_64 already installed and latest version Adding package expect from group planetlab Package expect-5.44.1.15-2.fc14.x86_64 already installed and latest version Adding package cronie-anacron from group planetlab Package cronie-anacron-1.4.8-2.fc14.x86_64 already installed and latest version Adding package tar from group planetlab Package 2:tar-1.23-9.fc14.x86_64 already installed and latest version Adding package pyplnet from group planetlab Package pyplnet-4.3-18.onelab.noarch already installed and latest version Adding package sudo from group planetlab Package sudo-1.7.4p5-2.fc14.x86_64 already installed and latest version Adding package logrotate from group planetlab Package logrotate-3.7.9-4.fc14.x86_64 already installed and latest version Adding package at from group planetlab Package at-3.1.12-6.fc14.x86_64 already installed and latest version Adding package file from group planetlab Package file-5.04-17.fc14.x86_64 already installed and latest version Adding package traceroute from group planetlab Package 3:traceroute-2.0.18-1.fc14.x86_64 already installed and latest version Adding package curl from group planetlab Package curl-7.21.0-10.fc14.x86_64 already installed and latest version Adding package crontabs from group planetlab Package crontabs-1.11-1.20101115git.fc14.noarch already installed and latest version Adding package bzip2 from group planetlab Package bzip2-1.0.6-1.fc14.1.x86_64 already installed and latest version Adding package nc from group planetlab Package nc-1.100-2.fc14.x86_64 already installed and latest version Adding package util-vserver-pl from group planetlab Package util-vserver-pl-0.4-29.onelab.x86_64 already installed and latest version Adding package coreutils from group planetlab Package coreutils-8.5-7.fc14.x86_64 already installed and latest version Adding package wireless-tools from group planetlab Package 1:wireless-tools-29-5.1.fc12.x86_64 already installed and latest version Adding package util-vserver-lib from group planetlab Package util-vserver-lib-0.30.216-21.x86_64 already installed and latest version Adding package passwd from group planetlab Package passwd-0.78-1.fc14.x86_64 already installed and latest version Adding package time from group planetlab Package time-1.7-38.fc14.x86_64 already installed and latest version Adding package quota from group planetlab Package 1:quota-3.17-18.fc14.x86_64 already installed and latest version Adding package telnet from group planetlab Package 1:telnet-0.17-51.fc14.x86_64 already installed and latest version Adding package readline from group planetlab Package readline-6.1-2.fc14.x86_64 already installed and latest version Adding package cronie from group planetlab Package cronie-1.4.8-2.fc14.x86_64 already installed and latest version Adding package nano from group planetlab Package nano-2.2.4-1.fc14.x86_64 already installed and latest version Adding package filesystem from group planetlab Package filesystem-2.4.35-1.fc14.x86_64 already installed and latest version Adding package diffutils from group planetlab Package diffutils-2.8.1-29.fc14.x86_64 already installed and latest version Adding package e2fsprogs from group planetlab Package e2fsprogs-1.41.12-6.fc14.x86_64 already installed and latest version Adding package monitor-runlevelagent from group planetlab Package monitor-runlevelagent-3.1-6.onelab.x86_64 already installed and latest version Adding package pciutils from group planetlab Package pciutils-3.1.7-3.fc14.x86_64 already installed and latest version Adding package gzip from group planetlab Package gzip-1.4-1.fc14.x86_64 already installed and latest version Adding package nodemanager-vs from group planetlab Package nodemanager-vs-5.2-18.onelab.x86_64 already installed and latest version Adding package pl_mom from group planetlab Package pl_mom-2.3-5.onelab.x86_64 already installed and latest version No packages in any requested group available to install or update Config time: 0.004 Yum Version: 3.2.28 Setting up Package Sacks pkgsack time: 0.034 rpmdb time: 0.000 Setting up Update Process Updating Everything Building updates object up:Obs Init time: 0.220 up:simple updates time: 0.161 up:obs time: 0.030 up:condense time: 0.000 updates time: 1.008 No Packages marked for Update ***** 2016-01-19 08:53:43 Turning on messages ***** 2016-01-19 08:53:43 Checking existence of proxy config file... ***** 2016-01-19 08:53:43 Not using any proxy. ***** 2016-01-19 08:53:43 Rebuilding RPM Database. ***** 2016-01-19 08:53:44 Looking for RPMs to be deleted. ***** 2016-01-19 08:53:44 No RPMs listed in file to delete. ***** 2016-01-19 08:53:44 Removing any existing GPG signing keys from the RPM database ***** 2016-01-19 08:53:44 Installing all GPG signing keys in /etc/pki/rpm-gpg ***** 2016-01-19 08:53:44 Removing any existing reboot flags ***** 2016-01-19 08:53:44 Ignoring any reboot flags set by RPMs ***** 2016-01-19 08:53:44 Checking if /usr/bin/yum supports --verbose ***** 2016-01-19 08:53:44 It does, using --verbose option ***** 2016-01-19 08:53:44 Checking if /usr/bin/yum supports SSL certificate checks ***** 2016-01-19 08:53:44 Unsupported, not using --sslcertdir option ***** 2016-01-19 08:53:44 Invoking /usr/bin/yum clean all ***** 2016-01-19 08:53:44 List of crucial packages: ['NodeUpdate', 'nodemanager-lib', 'nodemanager-lxc', 'nodemanager-vs'] ***** 2016-01-19 08:53:44 Invoking /usr/bin/yum --verbose -y update NodeUpdate ***** 2016-01-19 08:54:01 Invoking /usr/bin/yum --verbose -y update nodemanager-lib ***** 2016-01-19 08:54:02 Invoking /usr/bin/yum --verbose -y install nodemanager-lxc ***** 2016-01-19 08:54:02 Invoking /usr/bin/yum --verbose -y update nodemanager-vs ***** 2016-01-19 08:54:04 Updating PlanetLab group ***** 2016-01-19 08:54:04 Invoking /usr/bin/yum --verbose -y groupinstall PlanetLab ***** 2016-01-19 08:54:06 Updating rest of system ***** 2016-01-19 08:54:06 Invoking /usr/bin/yum --verbose -y update ***** 2016-01-19 08:54:07 Checking for extra groups (extensions) to update ***** 2016-01-19 08:54:07 No extra groups found in file. ***** 2016-01-19 08:54:07 Update complete. 08:54:07(UTC) ==========stderr error: /etc/pki/rpm-gpg/RPM-GPG-KEY-fedora-14-primary: import failed. error: /etc/pki/rpm-gpg/RPM-GPG-KEY-fedora-i386: import failed. error: /etc/pki/rpm-gpg/RPM-GPG-KEY-fedora-sparc: import read failed(-1). error: /etc/pki/rpm-gpg/RPM-GPG-KEY-fedora-sparc64: import read failed(-1). error: /etc/pki/rpm-gpg/RPM-GPG-KEY-fedora-x86_64: import failed. Error: Nothing to do 08:54:07(UTC) Step: Rebuilding initrd sysexec >>> mount -t devtmpfs none /dev sysexec >>> mount -o bind /dev /tmp/mnt/sysimg/dev sysexec >>> mount -t sysfs none /tmp/mnt/sysimg/sys 08:54:07(UTC) /tmp/mnt/sysimg/boot/initrd-2.6.32-36.onelab.x86_64.img is already removed 08:54:07(UTC) sysexec >>> chroot /tmp/mnt/sysimg mkinitrd -v --with=ext3 --allow-missing /boot/initrd-2.6.32-36.onelab.x86_64.img 2.6.32-36.onelab.x86_64 sysexec >>> chroot /tmp/mnt/sysimg mkinitrd -v --with=ext3 --allow-missing /boot/initrd-2.6.32-36.onelab.x86_64.img 2.6.32-36.onelab.x86_64 08:54:12(UTC) ==========stdout 4 /tmp/initramfs.1BBG0L/dev/pts 4 /tmp/initramfs.1BBG0L/initqueue 4 /tmp/initramfs.1BBG0L/initqueue-finished 4 /tmp/initramfs.1BBG0L/initqueue-settled 4 /tmp/initramfs.1BBG0L/lib/udev/rules.d 4 /tmp/initramfs.1BBG0L/proc 4 /tmp/initramfs.1BBG0L/sys 4 /tmp/initramfs.1BBG0L/sysroot 4 /tmp/initramfs.1BBG0L/tmp 4 /tmp/initramfs.1BBG0L/usr/lib 4 /tmp/initramfs.1BBG0L/var/run 8 /tmp/initramfs.1BBG0L/dev 8 /tmp/initramfs.1BBG0L/emergency 8 /tmp/initramfs.1BBG0L/etc/ld.so.conf.d 8 /tmp/initramfs.1BBG0L/etc/plymouth 8 /tmp/initramfs.1BBG0L/lib/terminfo/a 8 /tmp/initramfs.1BBG0L/lib/terminfo/d 8 /tmp/initramfs.1BBG0L/lib/terminfo/l 8 /tmp/initramfs.1BBG0L/pre-pivot 8 /tmp/initramfs.1BBG0L/pre-trigger 8 /tmp/initramfs.1BBG0L/usr/share/plymouth/themes/details 8 /tmp/initramfs.1BBG0L/usr/share/plymouth/themes/text 8 /tmp/initramfs.1BBG0L/var 12 /tmp/initramfs.1BBG0L/mount 16 /tmp/initramfs.1BBG0L/pre-udev 20 /tmp/initramfs.1BBG0L/lib/modules/2.6.32-36.onelab.x86_64/kernel/lib 20 /tmp/initramfs.1BBG0L/usr/share/pixmaps 20 /tmp/initramfs.1BBG0L/usr/share/plymouth/themes 24 /tmp/initramfs.1BBG0L/etc/modprobe.d 28 /tmp/initramfs.1BBG0L/etc/lvm 28 /tmp/initramfs.1BBG0L/lib64/device-mapper 28 /tmp/initramfs.1BBG0L/usr/share/plymouth 32 /tmp/initramfs.1BBG0L/lib/terminfo/v 32 /tmp/initramfs.1BBG0L/usr/sbin 36 /tmp/initramfs.1BBG0L/cmdline 48 /tmp/initramfs.1BBG0L/lib/modules/2.6.32-36.onelab.x86_64/kernel/drivers/scsi/device_handler 52 /tmp/initramfs.1BBG0L/usr/share 60 /tmp/initramfs.1BBG0L/lib/terminfo 72 /tmp/initramfs.1BBG0L/etc/udev/rules.d 72 /tmp/initramfs.1BBG0L/lib/modules/2.6.32-36.onelab.x86_64/kernel/drivers/mmc/host 72 /tmp/initramfs.1BBG0L/usr/lib64/plymouth/renderers 80 /tmp/initramfs.1BBG0L/etc/udev 80 /tmp/initramfs.1BBG0L/lib/modules/2.6.32-36.onelab.x86_64/kernel/drivers/ata 80 /tmp/initramfs.1BBG0L/lib/modules/2.6.32-36.onelab.x86_64/kernel/drivers/cdrom 104 /tmp/initramfs.1BBG0L/usr/lib64/plymouth 116 /tmp/initramfs.1BBG0L/lib/modules/2.6.32-36.onelab.x86_64/kernel/fs/jbd 132 /tmp/initramfs.1BBG0L/lib/modules/2.6.32-36.onelab.x86_64/kernel/drivers/block 136 /tmp/initramfs.1BBG0L/lib/modules/2.6.32-36.onelab.x86_64/kernel/drivers/usb/storage 140 /tmp/initramfs.1BBG0L/lib/modules/2.6.32-36.onelab.x86_64/kernel/drivers/usb 144 /tmp/initramfs.1BBG0L/lib/modules/2.6.32-36.onelab.x86_64/kernel/drivers/mmc/core 152 /tmp/initramfs.1BBG0L/lib/modules/2.6.32-36.onelab.x86_64/kernel/drivers/firewire 160 /tmp/initramfs.1BBG0L/lib/modules/2.6.32-36.onelab.x86_64/kernel/drivers/md 172 /tmp/initramfs.1BBG0L/etc 172 /tmp/initramfs.1BBG0L/lib/modules/2.6.32-36.onelab.x86_64/kernel/drivers/scsi 196 /tmp/initramfs.1BBG0L/usr/bin 220 /tmp/initramfs.1BBG0L/lib/modules/2.6.32-36.onelab.x86_64/kernel/drivers/mmc 252 /tmp/initramfs.1BBG0L/lib/modules/2.6.32-36.onelab.x86_64/kernel/fs/ext3 292 /tmp/initramfs.1BBG0L/usr/lib64 340 /tmp/initramfs.1BBG0L/lib/udev 392 /tmp/initramfs.1BBG0L/lib/modules/2.6.32-36.onelab.x86_64/kernel/fs 580 /tmp/initramfs.1BBG0L/usr 1140 /tmp/initramfs.1BBG0L/lib/modules/2.6.32-36.onelab.x86_64/kernel/drivers 1280 /tmp/initramfs.1BBG0L/bin 1376 /tmp/initramfs.1BBG0L/sbin 1556 /tmp/initramfs.1BBG0L/lib/modules/2.6.32-36.onelab.x86_64/kernel 1744 /tmp/initramfs.1BBG0L/lib/modules/2.6.32-36.onelab.x86_64 1748 /tmp/initramfs.1BBG0L/lib/modules 2160 /tmp/initramfs.1BBG0L/lib 6548 /tmp/initramfs.1BBG0L/lib64 12264 /tmp/initramfs.1BBG0L 12264 total -rw-r--r-- 1 root root 4.6M Jan 19 08:54 /boot/initrd-2.6.32-36.onelab.x86_64.img 08:54:12(UTC) ==========stderr I: Installing /lib64/libgcc_s-4.5.1-20100924.so.1 I: Installing /lib64/libc-2.13.so I: Installing /lib64/ld-2.13.so I: Installing /bin/dash I: Installing /lib64/libglib-2.0.so.0.2600.0 I: Installing /lib/udev/console_init I: Installing /bin/setfont I: Installing /bin/loadkeys I: Installing /lib/udev/rules.d/10-console.rules I: Installing /usr/share/dracut/modules.d/10redhat-i18n/parse-i18n.sh I: Installing /usr/share/dracut/modules.d/10rpmversion/dracut-version I: Installing /usr/share/dracut/modules.d/10rpmversion/version.sh I: Installing /lib64/libply.so.2.0.0 I: Installing /lib64/libply-splash-core.so.2.0.0 I: Installing /lib64/libm-2.13.so I: Installing /lib64/librt-2.13.so I: Installing /lib64/libdl-2.13.so I: Installing /lib64/libpthread-2.13.so I: Installing /sbin/plymouthd I: Installing /bin/plymouth I: Installing /usr/share/plymouth/themes/text/text.plymouth I: Installing /usr/lib64/plymouth//text.so I: Installing /usr/share/plymouth/themes/details/details.plymouth I: Installing /usr/lib64/plymouth//details.so I: Installing /usr/share/pixmaps/system-logo-white.png I: Installing /etc/fedora-release I: Installing /usr/share/plymouth//plymouthd.defaults I: Installing /etc/plymouth//plymouthd.conf I: Installing /usr/lib64/libdrm_intel.so.1.0.0 I: Installing /usr/lib64/libdrm.so.2.4.0 I: Installing /usr/lib64/libdrm_radeon.so.1.0.0 I: Installing /usr/lib64/libdrm_nouveau.so.1.0.0 I: Installing /usr/lib64/libkms.so.1.0.0 I: Installing /usr/lib64/plymouth//renderers/drm.so I: Installing /usr/lib64/plymouth//renderers/frame-buffer.so I: Installing /usr/share/dracut/modules.d/50plymouth/plymouth-newroot.sh I: Installing /usr/share/dracut/modules.d/50plymouth/plymouth-pretrigger.sh I: Installing /usr/share/dracut/modules.d/50plymouth/plymouth-emergency.sh I: Installing /usr/share/dracut/modules.d/50plymouth/cryptroot-ask.sh I: Installing /bin/readlink I: Installing /usr/share/dracut/modules.d/90dm/dm-pre-udev.sh I: Installing /lib64/libdevmapper.so.1.02 I: Installing /lib64/libudev.so.0.9.1 I: Installing /lib64/libselinux.so.1 I: Installing /lib64/libsepol.so.1 I: Installing /sbin/dmsetup I: Installing /lib64/libdevmapper-event.so.1.02 I: Installing /sbin/dmeventd I: Installing /lib/udev/rules.d/10-dm.rules I: Installing /lib/udev/rules.d/95-dm-notify.rules I: Installing /lib/modules/2.6.32-36.onelab.x86_64/kernel/drivers/md/dm-mod.ko I: Installing /etc/modprobe.conf I: Installing /etc/modprobe.d/dist-alsa.conf I: Installing /etc/modprobe.d/dist.conf I: Installing /etc/modprobe.d/blacklist.conf I: Installing /etc/modprobe.d/dist-oss.conf I: Installing /usr/share/dracut/modules.d/90kernel-modules/parse-kernel.sh I: Installing /lib/modules/2.6.32-36.onelab.x86_64/kernel/drivers/cdrom/cdrom.ko I: Installing /lib/modules/2.6.32-36.onelab.x86_64/kernel/drivers/scsi/sr_mod.ko I: Installing /lib/modules/2.6.32-36.onelab.x86_64/kernel/lib/crc-t10dif.ko I: Installing /lib/modules/2.6.32-36.onelab.x86_64/kernel/drivers/scsi/sd_mod.ko I: Installing /lib/modules/2.6.32-36.onelab.x86_64/kernel/drivers/scsi/device_handler/scsi_dh_rdac.ko I: Installing /lib/modules/2.6.32-36.onelab.x86_64/kernel/drivers/scsi/device_handler/scsi_dh_emc.ko I: Installing /lib/modules/2.6.32-36.onelab.x86_64/kernel/lib/crc-itu-t.ko I: Installing /lib/modules/2.6.32-36.onelab.x86_64/kernel/drivers/firewire/firewire-core.ko I: Installing /lib/modules/2.6.32-36.onelab.x86_64/kernel/drivers/firewire/firewire-ohci.ko I: Installing /lib/modules/2.6.32-36.onelab.x86_64/kernel/drivers/usb/storage/usb-storage.ko I: Installing /lib/modules/2.6.32-36.onelab.x86_64/kernel/drivers/mmc/core/mmc_core.ko I: Installing /lib/modules/2.6.32-36.onelab.x86_64/kernel/drivers/mmc/host/sdhci.ko I: Installing /lib/modules/2.6.32-36.onelab.x86_64/kernel/drivers/mmc/host/sdhci-pci.ko I: Installing /lib/modules/2.6.32-36.onelab.x86_64/kernel/drivers/block/floppy.ko I: Installing /lib/modules/2.6.32-36.onelab.x86_64/kernel/drivers/ata/ata_generic.ko I: Installing /lib/modules/2.6.32-36.onelab.x86_64/kernel/drivers/ata/pata_acpi.ko I: Installing /lib/modules/2.6.32-36.onelab.x86_64/kernel/drivers/ata/ata_piix.ko device node not found I: Installing /lib/modules/2.6.32-36.onelab.x86_64/kernel/fs/mbcache.ko I: Installing /lib/modules/2.6.32-36.onelab.x86_64/kernel/fs/jbd/jbd.ko I: Installing /lib/modules/2.6.32-36.onelab.x86_64/kernel/fs/ext3/ext3.ko I: Installing /lib/modules/2.6.32-36.onelab.x86_64/kernel/drivers/scsi/scsi_wait_scan.ko I: Installing /lib64/libreadline.so.6.1 I: Installing /lib64/libtinfo.so.5.7 I: Installing /sbin/lvm I: Installing /usr/share/dracut/modules.d/90lvm/64-lvm.rules I: Installing /etc/lvm/lvm.conf I: Installing /lib/udev/rules.d/13-dm-disk.rules I: Installing /lib/udev/rules.d/11-dm-lvm.rules I: Installing /usr/share/dracut/modules.d/90lvm/lvm_scan.sh I: Installing /usr/share/dracut/modules.d/90lvm/parse-lvm.sh cat: write error: Broken pipe I: Installing /lib64/libdevmapper-event-lvm2.so.2.02 I: Installing /lib64/liblvm2cmd.so.2.02 I: Installing /lib64/device-mapper/libdevmapper-event-lvm2mirror.so I: Installing /lib64/device-mapper/libdevmapper-event-lvm2snapshot.so I: Installing /usr/share/dracut/modules.d/95resume/parse-resume.sh I: Installing /usr/share/dracut/modules.d/95resume/resume-genrules.sh I: Installing /usr/share/dracut/modules.d/95resume/resume.sh I: Installing /lib64/libblkid.so.1.1.0 I: Installing /lib64/libuuid.so.1.3.0 I: Installing /bin/umount I: Installing /usr/share/dracut/modules.d/95rootfs-block/parse-block.sh I: Installing /usr/share/dracut/modules.d/95rootfs-block/block-genrules.sh I: Installing /usr/share/dracut/modules.d/95rootfs-block/mount-root.sh I: Installing /lib/terminfo/a/ansi I: Installing /lib/terminfo/l/linux I: Installing /lib/terminfo/d/dumb I: Installing /lib/terminfo/v/vt220 I: Installing /lib/terminfo/v/vt200 I: Installing /lib/terminfo/v/vt100-nav I: Installing /lib/terminfo/v/vt100-am I: Installing /lib/terminfo/v/vt100 I: Installing /lib/terminfo/v/vt102 I: Installing /lib/terminfo/v/vt52 I: Installing /sbin/udevd I: Installing /sbin/udevadm I: Installing /etc/udev/udev.conf I: Installing /etc/group I: Installing /bin/basename I: Installing /lib/udev/rules.d/50-udev-default.rules I: Installing /lib/udev/rules.d/60-persistent-storage.rules I: Installing /lib/udev/rules.d/61-persistent-storage-edd.rules I: Installing /lib/udev/rules.d/80-drivers.rules I: Installing /lib/udev/rules.d/95-udev-late.rules I: Installing /usr/share/dracut/modules.d/95udev-rules/01-ignore.rules I: Installing /lib/udev/rules.d/50-firmware.rules I: Installing /bin/cat I: Installing /bin/uname I: Installing /sbin/blkid I: Installing /usr/share/dracut/modules.d/95udev-rules/59-persistent-storage.rules I: Installing /usr/share/dracut/modules.d/95udev-rules/61-persistent-storage.rules I: Installing /lib/udev/ata_id I: Installing /lib/udev/cdrom_id I: Installing /lib/udev/create_floppy_devices I: Installing /lib/udev/edd_id I: Installing /lib/udev/firmware I: Installing /usr/lib64/libusb-0.1.so.4.4.4 I: Installing /lib/udev/hid2hci I: Installing /lib/udev/path_id I: Installing /lib/udev/scsi_id I: Installing /lib/udev/usb_id cat: write error: Broken pipe I: Installing /lib64/libnss_files-2.13.so I: Installing /bin/mount I: Installing /bin/mknod I: Installing /bin/mkdir I: Installing /sbin/modprobe I: Installing /sbin/killall5 I: Installing /bin/sleep I: Installing /usr/sbin/chroot I: Installing /bin/sed I: Installing /lib64/libcap.so.2.22 I: Installing /lib64/libacl.so.1.1.0 I: Installing /lib64/libattr.so.1.1.0 I: Installing /bin/ls I: Installing /usr/bin/flock I: Installing /bin/cp I: Installing /bin/mv I: Installing /bin/dmesg I: Installing /bin/rm I: Installing /bin/ln I: Installing /sbin/rmmod I: Installing /usr/bin/mkfifo I: Installing /lib64/libpcre.so.0.0.1 I: Installing /usr/bin/less I: Installing /usr/share/dracut/modules.d/99base/init I: Installing /usr/share/dracut/modules.d/99base/initqueue I: Installing /usr/share/dracut/modules.d/99base/loginit I: Installing /sbin/switch_root I: Installing /usr/share/dracut/modules.d/99base/dracut-lib.sh I: Installing /usr/share/dracut/modules.d/99base/parse-root-opts.sh I: Installing /usr/share/dracut/modules.d/99base/parse-blacklist.sh I: ldconfig might need uid=0 (root) for chroot() 08:54:12(UTC) sysexec >>> umount /tmp/mnt/sysimg/sys sysexec >>> umount /tmp/mnt/sysimg/sys 08:54:12(UTC) sysexec >>> umount /tmp/mnt/sysimg/dev sysexec >>> umount /tmp/mnt/sysimg/dev 08:54:12(UTC) Step: Updating node configuration. 08:54:12(UTC) Updating vserver's /etc/hosts and /etc/resolv.conf files 08:54:12(UTC) Updating network configuration in: 08:54:12(UTC) /tmp/mnt/sysimg//vservers/.pkg 08:54:12(UTC) /tmp/mnt/sysimg//vservers/.vref 08:54:12(UTC) /tmp/mnt/sysimg//vservers/.vstub 08:54:12(UTC) /tmp/mnt/sysimg//vservers/.hash 08:54:12(UTC) /tmp/mnt/sysimg//vservers/.vref/onelab-f14-x86_64 08:54:12(UTC) Forcing update on vserver reference directory: /tmp/mnt/sysimg//vservers/.vref/onelab-f14-x86_64 08:54:12(UTC) sysexec (shell mode) >>> echo 'AUTO_UPDATE_NET_FILES' > /tmp/mnt/sysimg//vservers/.vref/onelab-f14-x86_64/etc/AUTO_UPDATE_NET_FILESsysexec (shell mode) >>> echo 'AUTO_UPDATE_NET_FILES' > /tmp/mnt/sysimg//vservers/.vref/onelab-f14-x86_64/etc/AUTO_UPDATE_NET_FILES 08:54:12(UTC) Updating network files in /tmp/mnt/sysimg//vservers/.vref/onelab-f14-x86_64. 08:54:12(UTC) sysexec >>> chattr -i /tmp/mnt/sysimg//vservers/.vref/onelab-f14-x86_64/etc/hosts sysexec >>> chattr -i /tmp/mnt/sysimg//vservers/.vref/onelab-f14-x86_64/etc/hosts 08:54:12(UTC) sysexec >>> chattr -i /tmp/mnt/sysimg//vservers/.vref/onelab-f14-x86_64/etc/resolv.conf sysexec >>> chattr -i /tmp/mnt/sysimg//vservers/.vref/onelab-f14-x86_64/etc/resolv.conf 08:54:12(UTC) ==========stderr chattr: No such file or directory while trying to stat /tmp/mnt/sysimg//vservers/.vref/onelab-f14-x86_64/etc/resolv.conf 08:54:12(UTC) sysexec >>> cp /tmp/mnt/sysimg/etc/resolv.conf /tmp/mnt/sysimg//vservers/.vref/onelab-f14-x86_64/etc sysexec >>> cp /tmp/mnt/sysimg/etc/resolv.conf /tmp/mnt/sysimg//vservers/.vref/onelab-f14-x86_64/etc 08:54:12(UTC) Updating ssh public host key with PLC. 08:54:12(UTC) Copying kernel and initrd for booting. 08:54:12(UTC) sysexec >>> cp /tmp/mnt/sysimg/boot/kernel-boot /tmp/kernel sysexec >>> cp /tmp/mnt/sysimg/boot/kernel-boot /tmp/kernel 08:54:12(UTC) sysexec >>> cp /tmp/mnt/sysimg/boot/initrd-boot /tmp/initrd sysexec >>> cp /tmp/mnt/sysimg/boot/initrd-boot /tmp/initrd 08:54:12(UTC) Unmounting disks. 08:54:12(UTC) sysexec >>> umount /tmp/mnt/sysimg/vservers sysexec >>> umount /tmp/mnt/sysimg/vservers 08:54:12(UTC) sysexec >>> umount /tmp/mnt/sysimg/proc sysexec >>> umount /tmp/mnt/sysimg/proc 08:54:12(UTC) sysexec >>> umount /tmp/mnt/sysimg/dev sysexec >>> umount /tmp/mnt/sysimg/dev 08:54:12(UTC) ==========stderr umount: /tmp/mnt/sysimg/dev: not mounted 08:54:12(UTC) sysexec >>> umount /tmp/mnt/sysimg/sys sysexec >>> umount /tmp/mnt/sysimg/sys 08:54:12(UTC) ==========stderr umount: /tmp/mnt/sysimg/sys: not mounted 08:54:12(UTC) sysexec >>> umount /tmp/mnt/sysimg sysexec >>> umount /tmp/mnt/sysimg 08:54:12(UTC) sysexec >>> vgchange -an sysexec >>> vgchange -an 08:54:12(UTC) ==========stdout 0 logical volume(s) in volume group "planetlab" now active 08:54:12(UTC) ==========stderr File descriptor 3 (/tmp/bm.log) leaked on vgchange invocation. Parent PID 616: /usr/bin/python 08:54:12(UTC) Step: Stopping RunlevelAgent.py 08:54:12(UTC) Unloading modules and chain booting to new kernel. 08:54:12(UTC) Uploading logs to /boot/upload-bmlog.php 08:54:13(UTC) sysexec >>> bash --login -c "upload_logs /root/.bash_eternal_history" sysexec >>> bash --login -c "upload_logs /root/.bash_eternal_history" 08:54:13(UTC) ==========stderr bash: upload_logs: command not found 08:54:13(UTC) sysexec >>> touch /tmp/CANCEL_BOOT sysexec >>> touch /tmp/CANCEL_BOOT 08:54:13(UTC) sysexec >>> ifconfig eth0 down sysexec >>> ifconfig eth0 down 08:54:13(UTC) sysexec >>> killall dhclient sysexec >>> killall dhclient 08:54:13(UTC) ==========stderr dhclient: no process found 08:54:13(UTC) sysexec >>> umount -a -r -t ext2,ext3 sysexec >>> umount -a -r -t ext2,ext3 08:54:13(UTC) ==========stderr umount: /: device is busy. (In some cases useful info about processes that use the device is found by lsof(8) or fuser(1)) 08:54:13(UTC) sysexec >>> modprobe -r lvm-mod sysexec >>> modprobe -r lvm-mod 08:54:13(UTC) ==========stderr WARNING: Deprecated config file /etc/modprobe.conf, all config files belong into /etc/modprobe.d/. FATAL: Module lvm_mod not found. 08:54:13(UTC) Unloading ata_piix 08:54:13(UTC) sysexec >>> modprobe -r ata_piix sysexec >>> modprobe -r ata_piix ata1.00: disabled sd 0:0:0:0: [sda] Synchronizing SCSI cache sd 0:0:0:0: [sda] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK sd 0:0:0:0: [sda] Stopping disk sd 0:0:0:0: [sda] START_STOP FAILED sd 0:0:0:0: [sda] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK ata2.00: disabled 08:54:13(UTC) ==========stderr WARNING: Deprecated config file /etc/modprobe.conf, all config files belong into /etc/modprobe.d/. 08:54:13(UTC) Unloading pata_acpi 08:54:13(UTC) sysexec >>> modprobe -r pata_acpi sysexec >>> modprobe -r pata_acpi 08:54:13(UTC) ==========stderr WARNING: Deprecated config file /etc/modprobe.conf, all config files belong into /etc/modprobe.d/. 08:54:13(UTC) Unloading i2c-piix4 08:54:13(UTC) sysexec >>> modprobe -r i2c-piix4 sysexec >>> modprobe -r i2c-piix4 08:54:13(UTC) ==========stderr WARNING: Deprecated config file /etc/modprobe.conf, all config files belong into /etc/modprobe.d/. 08:54:13(UTC) Unloading e1000 08:54:13(UTC) sysexec >>> modprobe -r e1000 sysexec >>> modprobe -r e1000 e1000 0000:00:03.0: PCI INT A disabled 08:54:13(UTC) ==========stderr WARNING: Deprecated config file /etc/modprobe.conf, all config files belong into /etc/modprobe.d/. 08:54:13(UTC) Unloading e1000 driver; sleeping 4 seconds... 08:54:17(UTC) Unloading sd_mod 08:54:17(UTC) sysexec >>> modprobe -r sd_mod sysexec >>> modprobe -r sd_mod 08:54:17(UTC) ==========stderr WARNING: Deprecated config file /etc/modprobe.conf, all config files belong into /etc/modprobe.d/. 08:54:17(UTC) Unloading usb_storage 08:54:17(UTC) sysexec >>> modprobe -r usb_storage sysexec >>> modprobe -r usb_storage usbcore: deregistering interface driver usb-storage udevd[53]: failed to create queue file: No such file or directory udevd[53]: failed to create queue file: No such file or directory udevd[53]: failed to create queue file: No such file or directory 08:54:17(UTC) ==========stderr WARNING: Deprecated config file /etc/modprobe.conf, all config files belong into /etc/modprobe.d/. 08:54:17(UTC) Skipping unload of kernel module 'floppy'. 08:54:17(UTC) Parsed in "hcheck_reboot0 systemd.log_level=debug console=ttyS0,115200n8 biosdevname=0 selinux=0" kexec args from /kargs.txt 08:54:17(UTC) sysexec >>> hwclock --systohc --utc sysexec >>> hwclock --systohc --utc 08:54:18(UTC) sysexec >>> kexec --force --initrd=/tmp/initrd --append="root=/dev/mapper/planetlab-root ramdisk_size=8192 hcheck_reboot0 systemd.log_level=debug console=ttyS0,115200n8 biosdevname=0 selinux=0" /tmp/kernel sysexec >>> kexec --force --initrd=/tmp/initrd --append="root=/dev/mapper/planetlab-root ramdisk_size=8192 hcheck_reboot0 systemd.log_level=debug console=ttyS0,115200n8 biosdevname=0 selinux=0" /tmp/kernel md: stopping all md devices. Starting new kernel Initializing cgroup subsys cpuset Initializing cgroup subsys cpu Linux version 2.6.32-36.onelab.x86_64 (support@planet-lab.org) (gcc version 4.5.1 20100924 (Red Hat 4.5.1-4) (GCC) ) #1 SMP Tue Jan 19 09:12:00 CET 2016 Command line: root=/dev/mapper/planetlab-root ramdisk_size=8192 hcheck_reboot0 systemd.log_level=debug console=ttyS0,115200n8 biosdevname=0 selinux=0 KERNEL supported cpus: Intel GenuineIntel AMD AuthenticAMD Centaur CentaurHauls BIOS-provided physical RAM map: BIOS-e820: 0000000000000100 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000007ffe0000 (usable) BIOS-e820: 000000007ffe0000 - 0000000080000000 (reserved) BIOS-e820: 00000000feffc000 - 00000000ff000000 (reserved) BIOS-e820: 00000000fffc0000 - 0000000100000000 (reserved) DMI 2.8 present. SMBIOS version 2.8 @ 0xF6330 last_pfn = 0x7ffe0 max_arch_pfn = 0x400000000 PAT not supported by CPU. x2apic enabled by BIOS, switching to x2apic ops init_memory_mapping: 0000000000000000-000000007ffe0000 RAMDISK: 7fb46000 - 7ffd451d ACPI: RSDP 00000000000f6300 00014 (v00 BOCHS ) ACPI: RSDT 000000007ffe16ee 00034 (v01 BOCHS BXPCRSDT 00000001 BXPC 00000001) ACPI: FACP 000000007ffe0c14 00074 (v01 BOCHS BXPCFACP 00000001 BXPC 00000001) ACPI: DSDT 000000007ffe0040 00BD4 (v01 BOCHS BXPCDSDT 00000001 BXPC 00000001) ACPI: FACS 000000007ffe0000 00040 ACPI: SSDT 000000007ffe0c88 009B6 (v01 BOCHS BXPCSSDT 00000001 BXPC 00000001) ACPI: APIC 000000007ffe163e 00078 (v01 BOCHS BXPCAPIC 00000001 BXPC 00000001) ACPI: HPET 000000007ffe16b6 00038 (v01 BOCHS BXPCHPET 00000001 BXPC 00000001) Setting APIC routing to cluster x2apic. No NUMA configuration found Faking a node at 0000000000000000-000000007ffe0000 Bootmem setup node 0 0000000000000000-000000007ffe0000 NODE_DATA [000000000000a000 - 000000000003dfff] bootmap [000000000003e000 - 000000000004dfff] pages 10 (7 early reservations) ==> bootmem [0000000000 - 007ffe0000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000] #2 [0001000000 - 0001f4fdc4] TEXT DATA BSS ==> [0001000000 - 0001f4fdc4] #3 [007fb46000 - 007ffd451d] RAMDISK ==> [007fb46000 - 007ffd451d] #4 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000] #5 [0001f50000 - 0001f50095] BRK ==> [0001f50000 - 0001f50095] #6 [0000008000 - 000000a000] PGTABLE ==> [0000008000 - 000000a000] found SMP MP-table at [ffff8800000f64e0] f64e0 kvm-clock: Using msrs 4b564d01 and 4b564d00 kvm-clock: cpu 0, msr 0:1bc10c1, boot clock Zone PFN ranges: DMA 0x00000001 -> 0x00001000 DMA32 0x00001000 -> 0x00100000 Normal 0x00100000 -> 0x00100000 Movable zone start PFN for each node early_node_map[2] active PFN ranges 0: 0x00000001 -> 0x0000009f 0: 0x00000100 -> 0x0007ffe0 ACPI: PM-Timer IO Port: 0x608 Setting APIC routing to cluster x2apic. ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1]) ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 0, version 17, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level) ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level) Using ACPI (MADT) for SMP configuration information ACPI: HPET id: 0x8086a201 base: 0xfed00000 SMP: Allowing 1 CPUs, 0 hotplug CPUs PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000 PM: Registered nosave memory: 00000000000f0000 - 0000000000100000 Allocating PCI resources starting at 80000000 (gap: 80000000:7effc000) Booting paravirtualized kernel on KVM NR_CPUS:4096 nr_cpumask_bits:1 nr_cpu_ids:1 nr_node_ids:1 PERCPU: Embedded 30 pages/cpu @ffff880002000000 s93016 r8192 d21672 u2097152 pcpu-alloc: s93016 r8192 d21672 u2097152 alloc=1*2097152 pcpu-alloc: [0] 0 kvm-clock: cpu 0, msr 0:20160c1, primary cpu clock Built 1 zonelists in Node order, mobility grouping on. Total pages: 516889 Policy zone: DMA32 Kernel command line: root=/dev/mapper/planetlab-root ramdisk_size=8192 hcheck_reboot0 systemd.log_level=debug console=ttyS0,115200n8 biosdevname=0 selinux=0 PID hash table entries: 4096 (order: 3, 32768 bytes) Checking aperture... No AGP bridge found AMD-Vi disabled by default: pass amd_iommu=on to enable Memory: 2046984k/2097024k available (5343k kernel code, 392k absent, 49648k reserved, 6597k data, 1232k init) Hierarchical RCU implementation. NR_IRQS:33024 nr_irqs:256 Console: colour VGA+ 80x25 console [ttyS0] enabled allocated 20971520 bytes of page_cgroup please try 'cgroup_disable=memory' option if you don't want memory cgroups HPET: 3 timers in total, 0 timers will be used for per-cpu timer Detected 2599.996 MHz processor. Calibrating delay loop (skipped) preset value.. 5199.99 BogoMIPS (lpj=2599996) pid_max: default: 32768 minimum: 301 Security Framework initialized SELinux: Disabled at boot. Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes) Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes) Mount-cache hash table entries: 256 Initializing cgroup subsys ns Initializing cgroup subsys cpuacct Initializing cgroup subsys memory Initializing cgroup subsys devices Initializing cgroup subsys freezer Initializing cgroup subsys net_cls Initializing cgroup subsys blkio mce: CPU supports 10 MCE banks alternatives: switching to unfair spinlock SMP alternatives: switching to UP code Freeing SMP alternatives: 38k freed ACPI: Core revision 20090903 ftrace: converting mcount calls to 0f 1f 44 00 00 ftrace: allocating 21994 entries in 87 pages Setting APIC routing to physical x2apic ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 CPU0: Intel QEMU Virtual CPU version 2.4.1 stepping 03 Performance Events: Broken PMU hardware detected, using software events only. NMI watchdog disabled (cpu0): hardware events not enabled Brought up 1 CPUs Total of 1 processors activated (5199.99 BogoMIPS). devtmpfs: initialized regulator: core version 0.5 NET: Registered protocol family 16 ACPI: bus type pci registered PCI: Using configuration type 1 for base access bio: create slab at 0 ACPI: Interpreter enabled ACPI: (supports S0 S3 S4 S5) ACPI: Using IOAPIC for interrupt routing ACPI: No dock devices found. ACPI: PCI Root Bridge [PCI0] (0000:00) pci 0000:00:01.3: quirk: region 0600-063f claimed by PIIX4 ACPI pci 0000:00:01.3: quirk: region 0700-070f claimed by PIIX4 SMB ACPI: PCI Interrupt Link [LNKA] (IRQs 5 10 11) *0, disabled. ACPI: PCI Interrupt Link [LNKB] (IRQs 5 10 11) *0, disabled. ACPI: PCI Interrupt Link [LNKC] (IRQs 5 10 *11) ACPI: PCI Interrupt Link [LNKD] (IRQs 5 10 11) *0, disabled. ACPI: PCI Interrupt Link [LNKS] (IRQs *9) HEST: Table is not found! vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none vgaarb: loaded SCSI subsystem initialized usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb PCI: Using ACPI for IRQ routing NetLabel: Initializing NetLabel: domain hash size = 128 NetLabel: protocols = UNLABELED CIPSOv4 NetLabel: unlabeled traffic allowed by default hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 hpet0: 3 comparators, 64-bit 100.000000 MHz counter Switching to clocksource kvm-clock pnp: PnP ACPI init ACPI: bus type pnp registered pnp: PnP ACPI: found 11 devices ACPI: ACPI bus type pnp unregistered NET: Registered protocol family 2 IP route cache hash table entries: 65536 (order: 7, 524288 bytes) TCP established hash table entries: 262144 (order: 10, 4194304 bytes) TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) TCP: Hash tables configured (established 262144 bind 65536) TCP reno registered NET: Registered protocol family 1 pci 0000:00:00.0: Limiting direct PCI/PCI transfers pci 0000:00:01.0: Activating ISA DMA hang workarounds Trying to unpack rootfs image as initramfs... Freeing initrd memory: 4665k freed audit: initializing netlink socket (disabled) type=2000 audit(1453193659.273:1): initialized HugeTLB registered 2 MB page size, pre-allocated 0 pages VFS: Disk quotas dquot_6.5.2 Dquot-cache hash table entries: 512 (order 0, 4096 bytes) msgmni has been set to 4007 alg: No test for stdrng (krng) ksign: Installing public key data Loading keyring - Added public key D1C3198AB517476D - User ID: Red Hat, Inc. (Kernel Module GPG key) - Added public key D4A26C9CCD09BEDA - User ID: Red Hat Enterprise Linux Driver Update Program Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) pci_hotplug: PCI Hot Plug PCI Core version: 0.5 pciehp: PCI Express Hot Plug Controller Driver version: 0.4 acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 acpiphp: Slot [3] registered acpiphp: Slot [4] registered acpiphp: Slot [5] registered acpiphp: Slot [6] registered acpiphp: Slot [7] registered acpiphp: Slot [8] registered acpiphp: Slot [9] registered acpiphp: Slot [10] registered acpiphp: Slot [11] registered acpiphp: Slot [12] registered acpiphp: Slot [13] registered acpiphp: Slot [14] registered acpiphp: Slot [15] registered acpiphp: Slot [16] registered acpiphp: Slot [17] registered acpiphp: Slot [18] registered acpiphp: Slot [19] registered acpiphp: Slot [20] registered acpiphp: Slot [21] registered acpiphp: Slot [22] registered acpiphp: Slot [23] registered acpiphp: Slot [24] registered acpiphp: Slot [25] registered acpiphp: Slot [26] registered acpiphp: Slot [27] registered acpiphp: Slot [28] registered acpiphp: Slot [29] registered acpiphp: Slot [30] registered acpiphp: Slot [31] registered pci-stub: invalid id string "" input: Power Button as /class/input/input0 ACPI: Power Button [PWRF] processor LNXCPU:00: registered as cooling_device0 ERST: Table is not found! Non-volatile memory driver v1.3 Linux agpgart interface v0.103 crash memory driver: version 1.1 Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled ˙serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A 00:06: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A brd: module loaded loop: module loaded input: Macintosh mouse button emulation as /class/input/input1 Fixed MDIO Bus: probed ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver uhci_hcd: USB Universal Host Controller Interface driver PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12 serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice input: AT Translated Set 2 keyboard as /class/input/input2 rtc_cmos 00:01: RTC can wake from S4 rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0 rtc0: alarms up to one day, 114 bytes nvram, hpet irqs cpuidle: using governor ladder cpuidle: using governor menu usbcore: registered new interface driver hiddev usbcore: registered new interface driver usbhid usbhid: v2.6:USB HID core driver TCP cubic registered Initializing XFRM netlink socket NET: Registered protocol family 10 lo: Disabled Privacy Extensions NET: Registered protocol family 17 registered taskstats version 1 rtc_cmos 00:01: setting system clock to 2016-01-19 08:54:20 UTC (1453193660) Initalizing network drop monitor service Freeing unused kernel memory: 1232k freed Write protecting the kernel read-only data: 10240k Freeing unused kernel memory: 784k freed Freeing unused kernel memory: 1736k freed dracut: dracut-006-6.fc14 WARNING: Deprecated config file /etc/modprobe.conf, all config files belong into /etc/modprobe.d/. device-mapper: uevent: version 1.0.3 device-mapper: ioctl: 4.20.6-ioctl (2011-02-02) initialised: dm-devel@redhat.com udev[68]: starting version 161 dracut: Starting plymouth daemon %GCannot open font file latarcyrheb-sun16 %Gscsi0 : ata_piix scsi1 : ata_piix ata1: PATA max MWDMA2 cmd 0x1f0 ctl 0x3f6 bmdma 0xc040 irq 14 ata2: PATA max MWDMA2 cmd 0x170 ctl 0x376 bmdma 0xc048 irq 15 ata1.00: ATA-7: QEMU HARDDISK, 2.4.1, max UDMA/100 ata1.00: 209715200 sectors, multi 16: LBA48 ata2.00: ATAPI: QEMU DVD-ROM, 2.4.1, max UDMA/100 ata2.00: configured for MWDMA2 ata1.00: configured for MWDMA2 scsi 0:0:0:0: Direct-Access ATA QEMU HARDDISK 2.4. PQ: 0 ANSI: 5 scsi 1:0:0:0: CD-ROM QEMU QEMU DVD-ROM 2.4. PQ: 0 ANSI: 5 sd 0:0:0:0: [sda] 209715200 512-byte logical blocks: (107 GB/100 GiB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda: sda1 sr0: scsi3-mmc drive: 4x/4x cd/rw xa/form2 tray Uniform CD-ROM driver Revision: 3.20 sd 0:0:0:0: [sda] Attached SCSI disk WARNING: Deprecated config file /etc/modprobe.conf, all config files belong into /etc/modprobe.d/. input: ImExPS/2 Generic Explorer Mouse as /class/input/input3 dracut: Scanning devices sda1 for LVM volume groups dracut: Reading all physical volumes. This may take a while... dracut: Found volume group "planetlab" using metadata type lvm2 dracut: 3 logical volume(s) in volume group "planetlab" now active kjournald starting. Commit interval 5 seconds EXT3-fs (dm-1): mounted filesystem with ordered data mode dracut: Mounted root filesystem /dev/mapper/planetlab-root dracut: Switching root Welcome to Fedora Starting udev: udev[284]: starting version 161 %Gsd 0:0:0:0: Attached scsi generic sg0 type 0 sr 1:0:0:0: Attached scsi generic sg1 type 5 e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k6-1-NAPI e1000: Copyright (c) 1999-2006 Intel Corporation. ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11 e1000 0000:00:03.0: PCI INT A -> Link[LNKC] -> GSI 11 (level, high) -> IRQ 11 parport_pc 00:05: reported by Plug and Play ACPI parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE,EPP] e1000 0000:00:03.0: eth0: (PCI:33MHz:32-bit) 02:34:56:00:00:05 e1000 0000:00:03.0: eth0: Intel(R) PRO/1000 Network Connection piix4_smbus 0000:00:01.3: SMBus Host Controller at 0x700, revision 0 ppdev: user-space parallel port driver [ OK ] Setting hostname vnode05.pl.sophia.inria.fr: [ OK ] Setting up Logical Volume Management: 3 logical volume(s) in volume group "planetlab" now active [ OK ] Checking filesystems Checking all file systems. [/sbin/fsck.ext3 (1) -- /] fsck.ext3 -a /dev/mapper/planetlab-root /dev/mapper/planetlab-root: clean, 19656/917504 files, 270457/3670016 blocks [/sbin/fsck.ext3 (1) -- /vservers] fsck.ext3 -a /dev/mapper/planetlab-vservers /dev/mapper/planetlab-vservers: clean, 24361/5570560 files, 512238/22274048 blocks [ OK ] Remounting root filesystem in read-write mode: EXT3-fs (dm-1): using internal journal [ OK ] Mounting local filesystems: kjournald starting. Commit interval 5 seconds EXT3-fs (dm-2): using internal journal EXT3-fs (dm-2): mounted filesystem with ordered data mode [ OK ] Enabling local filesystem quotas: [ OK ] Enabling /etc/fstab swaps: Adding 1048568k swap on /dev/mapper/planetlab-swap. Priority:-1 extents:1 across:1048568k D [ OK ] Entering non-interactive startup Starting monitoring for VG planetlab: 3 logical volume(s) in volume group "planetlab" monitored [ OK ] iptables: Applying firewall rules: WARNING: Deprecated config file /etc/modprobe.conf, all config files belong into /etc/modprobe.d/. ip_tables: (C) 2000-2006 Netfilter Core Team [ OK ] iptables: Loading additional modules: ip_conntrack nf_conntrack version 0.5.0 (16384 buckets, 65536 max) [ OK ] my_mod_register ipfw called my_mod_register sy_ipfw called my_mod_register sy_Vnet_ipfw called my_mod_register dummynet called my_mod_register dn_fifo called my_mod_register dn_wf2qp called my_mod_register dn_rr called my_mod_register dn_qfq called my_mod_register dn_prio called init_children mod_idx value 9 +++ start module 0 ipfw ipfw at ffffffffa01baa80 order 0x1 +++ start module 1 sy_ipfw SYSINIT at (null) order 0x2 ipfw2 initialized, divert loadable, nat loadable, rule-based forwarding disabled, default to accept, logging disabled +++ start module 2 sy_Vnet_ipfw SYSINIT at (null) order 0x3 +++ start module 3 dummynet dummynet at ffffffffa01baac0 order 0x4 DUMMYNET (null) with IPv6 initialized (100409) +++ start module 4 dn_fifo dn_fifo at ffffffffa01bab10 order 0x5 load_dn_sched dn_sched FIFO loaded +++ start module 5 dn_wf2qp dn_wf2qp at ffffffffa01babf0 order 0x6 load_dn_sched dn_sched WF2Q+ loaded +++ start module 6 dn_rr dn_rr at ffffffffa01bacd0 order 0x7 load_dn_sched dn_sched RR loaded +++ start module 7 dn_qfq dn_qfq at ffffffffa01badb0 order 0x8 load_dn_sched dn_sched QFQ loaded +++ start module 8 dn_prio dn_prio at ffffffffa01bae90 order 0x9 load_dn_sched dn_sched PRIO loaded ipfw_module_init loaded [ OK ] Bringing up loopback interface: [ OK ] Bringing up interface eth0: e1000: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX ADDRCONF(NETDEV_UP): eth0: link is not ready ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ OK ] PlanetLab Ping Of Death [ OK ] Starting system logger: [ OK ] Starting rpcbind: [ OK ] Starting NFS statd: [ OK ] Starting RPC idmapd: WARNING: Deprecated config file /etc/modprobe.conf, all config files belong into /etc/modprobe.d/. WARNING: Deprecated config file /etc/modprobe.conf, all config files belong into /etc/modprobe.d/. RPC: Registered udp transport module. RPC: Registered tcp transport module. RPC: Registered tcp NFSv4.1 backchannel transport module. [ OK ] Updating node configuration files: [ OK ] Mounting other filesystems: [ OK ] Retrigger failed udev events[ OK ] Creating required directories...[ OK ] Setting path to vshelper...[ OK ] Loading default device map...[ OK ] Mounting cgroup-hierarchy...[ OK ] Fixing /proc entries visibility...[ OK ] Generating SSH1 RSA host key: [ OK ] Starting sshd: [ OK ] starting fprobe-ulog:[ OK ] Starting pl_sshd:[ OK ] Starting ntpd: [ OK ] [ OK ] [ OK ] [ OK ] Updating slice images: [ OK ] Starting sendmail: [ OK ] Starting sm-client: [ OK ] Starting vsys:Daemonizing [ OK ] starting codemux:[ OK ] Loading fuse modulefuse init (API version 7.13) . Starting crond: [ OK ] Starting atd: [ OK ] [ OK ] Starting Node Manager: Usage: vserver [-s|--sync] [-v|--verbose] [--silent] [--debug] [--] * is the name of a vserver. Possible commands are: start [--rescue [--rescue-init] *]] ... starts the specified vserver stop [--rescue-init] ... stops the specified vserver restart ... restarts the specified vserver; this is the subsequent execution of a synchronized 'stop' and a 'start' condrestart ... restarts the vserver when it is running already suexec ... executes a command as the specified user in the vserver exec ... executes a command as root in the vserver enter ... executes the configured shell in the vserver chkconfig ... modifies the init-system; currently, only Red Hat's chkconfig is supported running ... succeeds iff the vserver is running status ... gives out some human readable status information about the vserver, and succeeds iff the vserver is running build * ... builds a new vserver from scratch, see vserver ... build --help for details delete ... remove a vserver unify [-R] * ... (de)unify the vserver with its reference vserver(s). pkg install ... installs package(s) in the vserver apt-get,apt-config,apt-cache * ... execute the apt-* command for the given vserver rpm * ... execute the rpm command for the given vserver pkgmgmt externalize|internalize [-y] ... externalize or internalize the package-management for the given vserver. 'Externalize' means that package metadata and management tools (apt-get,rpm) are living in the host, while 'internalize' means that data and programs from the vserver will be used. hashify ... hashify the guest. Please report bugs to vserver@list.linux-vserver.org [ OK ] [ OK ] Starting swap monitor: [ OK ] ip_set version 4 loaded HTB: quantum of class 10001 is big. Consider r2q change. HTB: quantum of class 10010 is small. Consider r2q change. HTB: quantum of class 10100 is small. Consider r2q change. HTB: quantum of class 10020 is small. Consider r2q change. Regression TestLab Node: vnode05.pl.sophia.inria.fr Kernel 2.6.32-36.onelab.x86_64 on an x86_64 http://vplc05.pl.sophia.inria.fr/ This machine is a node in the Regression TestLab distributed network. If you require assistance in administering this node, please contact thierry.parmentelat@inria.fr. Console login to this node is restricted to site_admin. vnode05.pl.sophia.inria.fr login: